2006 International CXT Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: DURA-BOND IN22.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CR8038CP.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2006 International CXT come from ELRING.

Listed part numbers: ELRING 832600 and ELRING 832570.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2006 International CXT — MELLING V2180.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 High Pressure Diesel Injection Oil Pump (HPOP) parts are listed for the 2006 International CXT, from DELPHI, STANDARD MOTOR PRODUCTS and GB REMANUFACTURING.

Listed part numbers: DELPHI EXHTP129, DELPHI EXHTP130 and GB REMANUFACTURING 739206, plus the other parts above.

This table covers the High Pressure Oil Rail repair kits. Read more

One part is listed for the 2006 International CXT — GB REMANUFACTURING 522037.

This table covers the seals at the High Pressure Oil Rail. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 High Pressure Oil Rail Seal parts are listed for the 2006 International CXT, from DORMAN and STANDARD MOTOR PRODUCTS.

Part numbers include DORMAN 2855102 and STANDARD MOTOR PRODUCTS SK168.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2006 International CXT — MELLING V2179.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

4 Oil Cooler parts are listed for the 2006 International CXT, from STANDARD MOTOR PRODUCTS, SKP and ULTRA-POWER.

Part numbers include SKP SK9045101, STANDARD MOTOR PRODUCTS OCK1 and STANDARD MOTOR PRODUCTS OCK3, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

14 Oil Filter parts are listed for the 2006 International CXT, from HASTINGS / BALDWIN, WIX, VARIOUS MFR and 4 other brands. WIX 57744XD carries the "Popular" badge.

In the Economy grade, VARIOUS MFR and FAMOUS BRAND supply 3 parts: the catalog's value-priced group. A representative part number is FAMOUS BRAND 84051.

In the High Performance / Heavy Duty grade, WIX supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57744XD.

The Standard Replacement section lists 10 options from HASTINGS / BALDWIN, WIX, DONALDSON and 2 other brands — built to original-equipment specification. HASTINGS / BALDWIN LF632 is listed in this group.

This table covers the Oil Filter covers. Read more

This group shows a single part: DORMAN 904204.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts for the 2006 International CXT come from 2 brands — DORMAN and SPECTRA PREMIUM.

Listed part numbers: DORMAN 2645104 and SPECTRA PREMIUM DTP07A.

This table covers the Oil Stand pipes. Read more

One part is listed for the 2006 International CXT — GB REMANUFACTURING 522073.

This table covers the Oil Temperature senders. Read more

This group shows a single part: DORMAN 9047549.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: HASTINGS MANUFACTURING 2D7474.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

This group shows a single part: MELLING MPR662.

This table covers the turbochargers that compress intake air. Read more

GPD supplies the 4 Turbocharger parts for the 2006 International CXT.

Listed part numbers: GPD 2511850, GPD 2511558 and GPD 2511348, plus the other parts above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: GPD 2535129.

This table covers the fasteners that mount the turbocharger. Read more

2 Turbocharger Mounting Hardware parts for the 2006 International CXT come from 2 brands — DORMAN and SKP.

Listed part numbers: DORMAN 904234 and SKP SK904234.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

One part is listed for the 2006 International CXT — SUNSONG 5801033.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts are listed for the 2006 International CXT, from DORMAN, DAYTON, GB REMANUFACTURING and 1 other brand.

This group includes DAYTON 2645122, DORMAN 904401 and DORMAN 2645114 and the remaining parts above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

3 Valve Spring parts for the 2006 International CXT come from MELLING.

The High Performance section lists 1 option from MELLING — engineered beyond original-equipment specification. MELLING 466704 is listed in this group.

Standard Replacement: 1 part, from MELLING. A representative part number is MELLING VS1458.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: MELLING 466704, MELLING VS1458 and MELLING VS1190.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: MELLING VL300.