2007 International 7000 Series Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: DURA-BOND IN24.

This table covers the Crankcase pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

One part is listed for the 2007 International 7000 Series — DORMAN 9047505.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2007 International 7000 Series.

Part numbers include STANDARD MOTOR PRODUCTS HPI9 and STANDARD MOTOR PRODUCTS HPI14.

This table covers the seals at the High Pressure Oil Rail. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 High Pressure Oil Rail Seal parts are listed for the 2007 International 7000 Series, from DORMAN and STANDARD MOTOR PRODUCTS.

Part numbers include DORMAN 2855102 and STANDARD MOTOR PRODUCTS SK168.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

VALVOLINE supplies the 5 Oil parts for the 2007 International 7000 Series.

In the Full Synthetic grade, VALVOLINE supplies 1 part: full-synthetic oils. A representative part number is VALVOLINE 909772.

In the Heavy Duty / Diesel grade, VALVOLINE supplies 1 part: grouped under the catalog's "Heavy Duty / Diesel" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 909778.

In the Synthetic Blend grade, VALVOLINE supplies 3 parts: synthetic-blend oils. A representative part number is VALVOLINE 909766.

Listed part numbers: VALVOLINE 909772, VALVOLINE 909778 and VALVOLINE 909766, plus the other parts above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2007 International 7000 Series, from SKP and STANDARD MOTOR PRODUCTS.

This group includes SKP SK9045101 and STANDARD MOTOR PRODUCTS OCK3.

This table covers the drain plugs in the oil pan. Read more

One part is listed for the 2007 International 7000 Series — DORMAN 0905014CD.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: DORMAN 0955002.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

31 Oil Filter parts are listed for the 2007 International 7000 Series, from HASTINGS / BALDWIN, WIX, DONALDSON and 3 other brands. WIX 57746XD carries the "Popular" badge. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by HASTINGS / BALDWIN, WIX, DONALDSON and 1 other brand.

This table covers the oil pans that hold the engine's oil sump. Read more

7 Oil Pan parts for the 2007 International 7000 Series come from 3 brands — DORMAN, SPECTRA PREMIUM and SKP.

Part numbers include DORMAN 2645054, DORMAN 2645006 and DORMAN 2645104, among others listed above.

This table covers the Oil Temperature senders. Read more

2 Oil Temperature Sender parts for the 2007 International 7000 Series come from 2 brands — DORMAN and HOLSTEIN.

Listed part numbers: DORMAN 9047549 and HOLSTEIN 2OTS0002.

This table covers the turbochargers that compress intake air. Read more

8 Turbocharger parts are listed for the 2007 International 7000 Series, from GPD and ROTOMASTER. GPD 2511558 carries the "Popular" badge.

This group includes GPD 2511558, GPD 2511890 and GPD 2513053 and the remaining parts above.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: DORMAN 9047130.

This table covers the Turbocharger Boost solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2007 International 7000 Series — DORMAN 5995001.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Turbocharger Gasket parts for the 2007 International 7000 Series come from GPD.

This group includes GPD 2535040 and GPD 2535129.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

2 Turbocharger Oil Line parts are listed for the 2007 International 7000 Series, from GATES and TERREPOWER.

This group includes GATES TL137 and TERREPOWER TO92696.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts are listed for the 2007 International 7000 Series, from DORMAN, DAYTON and SKP.

This group includes DAYTON 2645122, DORMAN 2645124 and DORMAN 2645114 and the remaining parts above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

3 Valve Spring parts for the 2007 International 7000 Series come from MELLING.

This group includes MELLING VS1462, MELLING VS1463 and MELLING VS1190.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: MELLING VL300.