9 Interior parts are listed for the 2008 International Paystar, in 6 part types, covering all 5 engine options (10.8L L6 DIESEL Turbocharged, 12.5L DIESEL, 14.9L L6 DIESEL Turbocharged, 15.2L L6 DIESEL Turbocharged and 8.9L L6 DIESEL Turbocharged). Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2008 International Paystar, the interior covers cabin hardware — seat components, handles, switch bezels, carpet, pedals and the pieces that take daily wear. 6 parts of the 9 listed are Inside Door Handle (4 parts), Accelerator Pedal Position Sensor (1 part) and Dash Board Air Vent (1 part). The other 3 part types cover the remaining 3 parts.
The 2008 International Paystar was sold with 5 engines. 6 parts fit every engine; the other 3 are engine-specific. Each part shows which engine(s) it fits.
Every interior part listed for the 2008 International Paystar comes from DORMAN.
Each part number listed for the 2008 International Paystar opens a page with every vehicle that part fits.
Accelerator Pedal Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 10.8L L6 DIESEL Turbocharged, 14.9L L6 DIESEL Turbocharged, 8.9L L6 DIESEL Turbocharged | 9047692 | 🇺🇸 US 🇨🇦 CA | with WM526 Series Pedals | View on Amazon |
This table covers the Accelerator Pedal position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
This group shows a single part: DORMAN 9047692.
Dash Board Air Vent
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2008 Paystar engines | 2165101 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the dash vents that direct cabin airflow.
One part is listed for the 2008 International Paystar — DORMAN 2165101.
Inside Door Handle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2008 Paystar engines | 7615107 | 🇺🇸 US 🇨🇦 CA | Black | View on Amazon |
| DORMAN Fits: all 2008 Paystar engines | 7615106 | 🇺🇸 US 🇨🇦 CA | Black | View on Amazon |
| DORMAN Fits: all 2008 Paystar engines | 7615108 | 🇺🇸 US 🇨🇦 CA | Chrome | View on Amazon |
| DORMAN Fits: all 2008 Paystar engines | 7615109 | 🇺🇸 US 🇨🇦 CA | Chrome | View on Amazon |
This table covers the interior door handles. Typical signs include a handle that works only from one side, or a broken lever inside the housing. Confirm inside vs outside and paint code in the notes.
4 Inside Door Handle parts for the 2008 International Paystar come from DORMAN. Every part fits all 5 engine options (10.8L L6 DIESEL Turbocharged, 12.5L DIESEL, 14.9L L6 DIESEL Turbocharged, 15.2L L6 DIESEL Turbocharged and 8.9L L6 DIESEL Turbocharged).
Listed part numbers: DORMAN 7615107, DORMAN 7615106 and DORMAN 7615108, plus the other parts above.
Inside Door Pull Handle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2008 Paystar engines | 7605109 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Inside Door Pull handles. Typical signs include a handle that works only from one side, or a broken lever inside the housing. Confirm inside vs outside and paint code in the notes.
One part is listed for the 2008 International Paystar — DORMAN 7605109.
Seat Cushion
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 10.8L L6 DIESEL Turbocharged, 12.5L DIESEL, 14.9L L6 DIESEL Turbocharged, 15.2L L6 DIESEL Turbocharged | 6415107 | 🇺🇸 US 🇨🇦 CA | Clothwith Seats Built by National Seating | View on Amazon |
This table covers the seat cushions.
This group shows a single part: DORMAN 6415107.
Window Crank Handle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 10.8L L6 DIESEL Turbocharged, 12.5L DIESEL, 14.9L L6 DIESEL Turbocharged, 15.2L L6 DIESEL Turbocharged | 7755102 | 🇺🇸 US 🇨🇦 CA | BlackChrome | View on Amazon |
This table covers the Window Crank handles. Typical signs include a handle that works only from one side, or a broken lever inside the housing. Confirm inside vs outside and paint code in the notes.
One part is listed for the 2008 International Paystar — DORMAN 7755102.
Buying Interior Parts for a 2008 International Paystar
On this vehicle, the interior covers cabin hardware — seat components, handles, switch bezels, carpet, pedals and the pieces that take daily wear.
- Match the engine first. Some interior parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the retainer clips with any panel removal — they are cheap insurance against squeaks.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Inside Door Handle and Accelerator Pedal Position Sensor .
Frequently Asked Questions
How many interior parts fit the 2008 International Paystar?
Our catalog currently lists 9 interior parts for the 2008 International Paystar across 6 subcategories and 1 brand, covering all 5 engine options (10.8L L6 DIESEL Turbocharged, 12.5L DIESEL, 14.9L L6 DIESEL Turbocharged, 15.2L L6 DIESEL Turbocharged and 8.9L L6 DIESEL Turbocharged). Each part is matched to the engine(s) it fits.
Do interior parts differ between 2008 International Paystar engines?
Some do. 6 parts fit every engine; the other 3 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of interior problems on a 2008 International Paystar?
Common symptoms include a door handle that works only from outside, sagging headliner, a window switch that needs two presses, or seat adjusters that stick. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the retainer clips with any panel removal — they are cheap insurance against squeaks.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 International Paystar was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 International Paystar?
First match the engine — each row shows which engine(s) the part fits. Then interior plastics are often color- and trim-specific — check the notes column against your trim level before ordering. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 International Paystar
Interior Parts for Other International Paystar Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.