6 Electrical connector parts are listed for the 2008 International Workstar, in 3 part types, covering all 5 engine options (10.8L L6 DIESEL Turbocharged, 12.5L DIESEL, 7.6L L6 DIESEL, 8.7L L6 DIESEL Turbocharged and 9.3L L6 DIESEL Turbocharged). Each one has a brand, a manufacturer part number and notes that say where it fits.
The connector system on the 2008 International Workstar supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules. All 6 listed parts are Heater Air Door Actuator Connector (3 parts), Camshaft Position Sensor Connector (2 parts) and EGR Pressure Feedback (DPFE) Sensor Connector (1 part).
The 2008 International Workstar was sold with 5 engines. 1 part fits every engine; the other 5 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2008 International Workstar electrical connector parts are STANDARD MOTOR PRODUCTS (3 parts), WALKER PRODUCTS (1 part) and FOUR SEASONS (1 part), plus 1 more brand.
Each part number listed for the 2008 International Workstar opens a page with every vehicle that part fits.
Camshaft Position Sensor Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 10.8L L6 DIESEL Turbocharged | S1832 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 7.6L L6 DIESEL, 8.7L L6 DIESEL Turbocharged, 9.3L L6 DIESEL Turbocharged | S906 | 🇺🇸 US 🇨🇦 CA | 7300 or 7400 | View on Amazon |
This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
STANDARD MOTOR PRODUCTS supplies both parts for the 2008 International Workstar.
Listed part numbers: STANDARD MOTOR PRODUCTS S1832 and STANDARD MOTOR PRODUCTS S906.
EGR Pressure Feedback (DPFE) Sensor Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WALKER PRODUCTS Fits: 8.7L L6 DIESEL Turbocharged | 2701045 | 🇺🇸 US | Terminal Type: Pin | View on Amazon |
This table covers the harness connectors at the EGR Pressure Feedback (DPFE) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
One part is listed for the 2008 International Workstar — WALKER PRODUCTS 2701045.
Heater Air Door Actuator Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FOUR SEASONS Fits: all 2008 Workstar engines | 70004 | 🇺🇸 US 🇨🇦 CA | 2 Terminal MaleMode | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 7.6L L6 DIESEL, 8.7L L6 DIESEL Turbocharged, 9.3L L6 DIESEL Turbocharged | S689 | 🇺🇸 US 🇨🇦 CA | Connector Shape: Rectangleblack | View on Amazon |
| WELLS Fits: 7.6L L6 DIESEL, 8.7L L6 DIESEL Turbocharged, 9.3L L6 DIESEL Turbocharged | 1P1146 | 🇺🇸 US 🇨🇦 CA | with 2 Terminal(s)Mode | View on Amazon |
This table covers the harness connectors at the Heater Air Door Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
3 Heater Air Door Actuator Connector parts are listed for the 2008 International Workstar, from FOUR SEASONS, STANDARD MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 2 are engine-specific.
This group includes FOUR SEASONS 70004, STANDARD MOTOR PRODUCTS S689 and WELLS 1P1146.
Buying Electrical Connector Parts for a 2008 International Workstar
On this vehicle, the connector system supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules.
- Match the engine first. Some electrical connector parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Heater Air Door Actuator Connector and Camshaft Position Sensor Connector .
Frequently Asked Questions
How many electrical connector parts fit the 2008 International Workstar?
Our catalog currently lists 6 electrical connector parts for the 2008 International Workstar across 3 subcategories and 4 brands, covering all 5 engine options (10.8L L6 DIESEL Turbocharged, 12.5L DIESEL, 7.6L L6 DIESEL, 8.7L L6 DIESEL Turbocharged and 9.3L L6 DIESEL Turbocharged). Each part is matched to the engine(s) it fits.
Do electrical connector parts differ between 2008 International Workstar engines?
Some do. 1 part fits every engine; the other 5 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of electrical connector problems on a 2008 International Workstar?
Common symptoms include intermittent faults that move when the harness is wiggled, green corrosion inside a plug, or melted connector housings near heat sources. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 International Workstar was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 International Workstar?
First match the engine — each row shows which engine(s) the part fits. Then match the connector by terminal count and keyway, not just appearance — many families look identical but will not lock. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 International Workstar
Electrical Connector Parts for Other International Workstar Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.