This page lists 11 ignition parts for the 2012 International Durastar, across 2 part types, covering all 4 engine options (6.0L V8 DIESEL Turbocharged, 6.4L V8 DIESEL Turbocharged, 7.6L L6 DIESEL Turbocharged and 9.3L L6 DIESEL Turbocharged). Every part shows its brand, manufacturer part number and fitment notes.
On the 2012 International Durastar, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 11 listed parts are Crankshaft Position Sensor (6 parts) and Camshaft Position Sensor (5 parts).
The 2012 International Durastar was sold with 4 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
5 brands supply ignition parts for the 2012 International Durastar, led by STANDARD MOTOR PRODUCTS (4 parts), DORMAN (2 parts) and WALKER PRODUCTS (2 parts), plus 2 more brands. Quality grades include Economy and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2012 International Durastar. 3 parts have it, including STANDARD MOTOR PRODUCTS PC645 (Camshaft Position Sensor) and STANDARD MOTOR PRODUCTS PC498T (Crankshaft Position Sensor). Each part number opens a page with every vehicle that part fits.
Camshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 6.4L V8 DIESEL Turbocharged | 917710 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 6.4L V8 DIESEL Turbocharged | PC645T | 🇺🇸 US 🇨🇦 CA | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 6.4L V8 DIESEL Turbocharged | PC645 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WALKER PRODUCTS Fits: 6.4L V8 DIESEL Turbocharged | 10081004 | 🇺🇸 US 🇨🇦 CA | Wire Quantity: 0 | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GB REMANUFACTURING Fits: 6.4L V8 DIESEL Turbocharged | 522078 | 🇺🇸 US 🇨🇦 CA | Camshaft / Crankshaft Position Sensor | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
5 Camshaft Position Sensor parts for the 2012 International Durastar come from 4 brands — STANDARD MOTOR PRODUCTS, DORMAN, WALKER PRODUCTS and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS PC645.
The Economy section lists 2 options from DORMAN and STANDARD MOTOR PRODUCTS — the catalog's value-priced group. DORMAN 917710 is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS and WALKER PRODUCTS supply 2 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS PC645.
1 further part sits outside the graded sections, with the same engine-level match.
Part numbers include STANDARD MOTOR PRODUCTS PC645, DORMAN 917710 and STANDARD MOTOR PRODUCTS PC645T, among others listed above.
Crankshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 6.4L V8 DIESEL Turbocharged | PC498T | 🇺🇸 US 🇨🇦 CA | T-Series | View on Amazon |
| DORMAN Fits: 6.4L V8 DIESEL Turbocharged | 917780 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 6.4L V8 DIESEL Turbocharged | SK917780 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 6.4L V8 DIESEL Turbocharged | PC498 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WALKER PRODUCTS Fits: 6.4L V8 DIESEL Turbocharged | 10081003 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GB REMANUFACTURING Fits: 6.4L V8 DIESEL Turbocharged | 522077 | 🇺🇸 US 🇨🇦 CA | Camshaft / Crankshaft Position Sensor | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
6 Crankshaft Position Sensor parts for the 2012 International Durastar come from 5 brands — STANDARD MOTOR PRODUCTS, DORMAN, SKP and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS PC498T.
The Economy section: 3 options from STANDARD MOTOR PRODUCTS, DORMAN and SKP. STANDARD MOTOR PRODUCTS PC498T is listed in this group.
Standard Replacement: 2 parts, from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS PC498.
1 further part sits outside the graded sections, with the same engine-level match.
Part numbers include STANDARD MOTOR PRODUCTS PC498T, DORMAN 917780 and SKP SK917780, among others listed above.
Buying Ignition Parts for a 2012 International Durastar
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Position Sensor and Camshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2012 International Durastar?
Our catalog currently lists 11 ignition parts for the 2012 International Durastar across 2 subcategories and 5 brands, covering all 4 engine options (6.0L V8 DIESEL Turbocharged, 6.4L V8 DIESEL Turbocharged, 7.6L L6 DIESEL Turbocharged and 9.3L L6 DIESEL Turbocharged). Each part is matched to the engine(s) it fits.
Do ignition parts differ between 2012 International Durastar engines?
Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 2012 International Durastar?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 International Durastar was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2012 International Durastar?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2012 International Durastar
Ignition Parts for Other International Durastar Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.