The 2014 International Transtar has 5 drivetrain parts with verified fitment on this page — 1 part type and 1 brand, covering all 3 engine options (10.5L L6 DIESEL Turbocharged, 12.4L L6 DIESEL Turbocharged and 8.9L L6). Each part includes a manufacturer part number and application notes.
The drivetrain system on the 2014 International Transtar moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Every listed part is a Drive Shaft Center Support Bearing.
The 2014 International Transtar was sold with 3 engines. All 5 parts on this page fit every engine.
Every drivetrain part listed for the 2014 International Transtar comes from ANCHOR.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2014 International Transtar. 1 part has it: ANCHOR 6035 (Drive Shaft Center Support Bearing). Each part number opens a page with every vehicle that part fits.
Drive Shaft Center Support Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: all 2014 Transtar engines | 6035 | 🇺🇸 US 🇨🇦 CA | Centerwith 30mm Inside Diameter Bearing(s) | View on Amazon |
| ANCHOR Fits: all 2014 Transtar engines | 6056 | 🇺🇸 US 🇨🇦 CA | Centerwith 35mm Inside Diameter Bearing(s) | View on Amazon |
| ANCHOR Fits: all 2014 Transtar engines | 6038 | 🇺🇸 US 🇨🇦 CA | Centerwith 40mm Inside Diameter Bearing(s) | View on Amazon |
| ANCHOR Fits: all 2014 Transtar engines | 6040 | 🇺🇸 US 🇨🇦 CA | Centerwith 45mm Inside Diameter Bearing(s) | View on Amazon |
| ANCHOR Fits: all 2014 Transtar engines | 6049 | 🇺🇸 US 🇨🇦 CA | Centerwith 60mm Inside Diameter Bearing(s) | View on Amazon |
This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
5 Drive Shaft Center Support Bearing parts for the 2014 International Transtar come from ANCHOR. The "Popular" part is ANCHOR 6035. Every part fits all 3 engine options (10.5L L6 DIESEL Turbocharged, 12.4L L6 DIESEL Turbocharged and 8.9L L6).
This group includes ANCHOR 6035, ANCHOR 6056 and ANCHOR 6038 and the remaining parts above.
Buying Drivetrain Parts for a 2014 International Transtar
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- You do not need to pick an engine: every drivetrain part on this page fits all 3 engine options (10.5L L6 DIESEL Turbocharged, 12.4L L6 DIESEL Turbocharged and 8.9L L6).
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Drive Shaft Center Support Bearing .
Frequently Asked Questions
How many drivetrain parts fit the 2014 International Transtar?
Our catalog currently lists 5 drivetrain parts for the 2014 International Transtar across 1 subcategory and 1 brand, covering all 3 engine options (10.5L L6 DIESEL Turbocharged, 12.4L L6 DIESEL Turbocharged and 8.9L L6). Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 2014 International Transtar engines?
No. On this page every drivetrain part fits all 3 engine options (10.5L L6 DIESEL Turbocharged, 12.4L L6 DIESEL Turbocharged and 8.9L L6). You do not need to pick an engine to choose the right row — use the notes for position and trim.
What are the signs of drivetrain problems on a 2014 International Transtar?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2014 International Transtar was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2014 International Transtar?
Every part on this page already fits all 3 engine options (10.5L L6 DIESEL Turbocharged, 12.4L L6 DIESEL Turbocharged and 8.9L L6). Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2014 International Transtar
Drivetrain Parts for Other International Transtar Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.