2001 Isuzu Rodeo Drivetrain Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 257 drivetrain parts for the 2001 Isuzu Rodeo, across 41 part types, covering both the 2.2L L4 and the 3.2L V6. Every part shows its brand, manufacturer part number and fitment notes.

On the 2001 Isuzu Rodeo, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. 92 parts of the 257 listed are Differential Pinion Bearing / Race (45 parts), Differential Ring and Pinion (25 parts) and Differential Carrier Bearing / Race (22 parts). The other 38 part types cover the remaining 165 parts.

Axle Shaft Bearing

Brand Part Number Markets Notes Buy
TIMKEN Fits: 3.2L V6 RW131R
🇺🇸 US 🇨🇦 CA
KitIncludes Bearing & Seal
Fitment notes — TIMKEN RW131R
KitIncludes Bearing & SealRear
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA10004
🇺🇸 US
Axle Shaft Bearing Kit
Fitment notes — USA STANDARD GEAR USA10004
Axle Shaft Bearing Kit
Rear4WDGM 7.5" and 7.6"Torrington Brand2.250" ODFor Use with C-Clip Axles
View on
Amazon

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Axle Shaft Retainer / Clip

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 3.2L V6 344171
🇺🇸 US 🇨🇦 CA
RearGM 7.5"/7.625"
Fitment notes — MOTIVE GEAR 344171
RearGM 7.5"/7.625"Axle Shaft Lock C-Clip
View on
Amazon

This table covers the Axle Shaft retainers and clips.

Axle Shaft Seal

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 3.2L V6 710516
🇺🇸 US 🇨🇦 CA
Front4WD
Fitment notes — NATIONAL 710516
Front4WD10 Bolt(s)with 7.625 IN Ring Gearwith Isuzu AxleIndependent front suspension
View on
Amazon
USA STANDARD GEAR Popular Fits: 3.2L V6 USA30196
🇺🇸 US
Yukon Mighty Seal
Fitment notes — USA STANDARD GEAR USA30196
Yukon Mighty Seal
Rear4WDGM 7.5" and 7.6"For Use with 5707/1563 Bearing
View on
Amazon
BCA Fits: 3.2L V6 NS710516
🇺🇸 US 🇨🇦 CA
Front4WD
Fitment notes — BCA NS710516
Front4WD10 Boltwith Isuzu Axlewith 7.625 IN Ring Gearwith Independent Front Suspension
View on
Amazon
BECK/ARNLEY Fits: 3.2L V6 0523768
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
SCHAEFFLER Fits: 3.2L V6 SS2301
🇺🇸 US 🇨🇦 CA
Front4WD
Fitment notes — SCHAEFFLER SS2301
Front4WD2.41" O.D. X 0.35" Width
View on
Amazon
SKF Fits: 3.2L V6 12187
🇺🇸 US 🇨🇦 CA
Front Inner4WD
View on
Amazon
TIMKEN Fits: 3.2L V6 710516
🇺🇸 US 🇨🇦 CA
Front4WD
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WS710516
🇺🇸 US 🇨🇦 CA
Front4WD
Fitment notes — WJB / INMOTION PARTS WS710516
Front4WD10 Bolt(s)with 7.625 IN Ring Gearwith Isuzu AxleIndependent front suspension
View on
Amazon

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

CV Axle

Economy

Brand Part Number Markets Notes Buy
CARDONE Fits: 3.2L V6 601351S
🇺🇸 US 🇨🇦 CA
Remanufactured
Fitment notes — CARDONE 601351S
Remanufactured
Fits:
Front Left4WDSupplied without Inboard Housing
or:
Front Right4WDSupplied without Inboard Housing
View on
Amazon
FAMOUS BRAND Fits: 3.2L V6 NCV40053
🇺🇸 US 🇨🇦 CA
Fits LeftFront
Fitment notes — FAMOUS BRAND NCV40053
Fits:
LeftFrontComplete AxleRodeo (Except Rodeo Sport)
or:
RightFrontComplete AxleRodeo (Except Rodeo Sport)
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
APWI Popular Fits: 3.2L V6 IZ8053S
🇺🇸 US 🇨🇦 CA
FrontSupplied without Inboard Housing
View on
Amazon
TRAKMOTIVE Popular Fits: 3.2L V6 HO8268
🇺🇸 US 🇨🇦 CA
Front4WD
Fitment notes — TRAKMOTIVE HO8268
Front4WDComplete Axle
View on
Amazon
APWI Fits: 3.2L V6 IZ8053
🇺🇸 US 🇨🇦 CA
FrontSupplied with Inboard Housing
View on
Amazon
TRAKMOTIVE Fits: 3.2L V6 HO8205
🇺🇸 US 🇨🇦 CA
Does Not Include ABS Ring
Fitment notes — TRAKMOTIVE HO8205
Does Not Include ABS Ring
Front4WDAxle without I.B. Joint
View on
Amazon

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.

CV Joint Boot

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 3.2L V6 614001
🇺🇸 US 🇨🇦 CA
Joint Diameter 3.58"Shaft End Inside Diameter .93"
Fitment notes — DORMAN 614001
Joint Diameter 3.58"Shaft End Inside Diameter .93"
Front Outer4WDJoint Diameter 3.58"
View on
Amazon
DORMAN Popular Fits: 3.2L V6 03680
🇺🇸 US 🇨🇦 CA
Outer4WD
Fitment notes — DORMAN 03680
Outer4WDJoint Diameter 3.83"
View on
Amazon
BECK/ARNLEY Fits: 3.2L V6 1032752
🇺🇸 US 🇨🇦 CA
Front Outer4WD
View on
Amazon
BECK/ARNLEY Fits: 3.2L V6 1032894
🇺🇸 US 🇨🇦 CA
Front Inner4WD
View on
Amazon
DORMAN Fits: 3.2L V6 614002
🇺🇸 US 🇨🇦 CA
Joint Diameter 3.3"Shaft End Inside Diameter 0.87"
Fitment notes — DORMAN 614002
Joint Diameter 3.3"Shaft End Inside Diameter 0.87"
Inner4WDJoint Diameter 3.3"
View on
Amazon
DORMAN Fits: 3.2L V6 614700
🇺🇸 US 🇨🇦 CA
Outer4WD
Fitment notes — DORMAN 614700
Outer4WDQuick-Boot
View on
Amazon
MEVOTECH Fits: 3.2L V6 DX388
🇺🇸 US 🇨🇦 CA
Front Inner4WD
View on
Amazon
MEVOTECH Fits: 3.2L V6 DX304
🇺🇸 US 🇨🇦 CA
Front Outer4WD
View on
Amazon

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.

Differential Carrier

Economy

Brand Part Number Markets Notes Buy
RICHMOND Popular Fits: 3.2L V6 XL5036
🇺🇸 US 🇨🇦 CA
EXCel
Fitment notes — RICHMOND XL5036
EXCel
Rearfor GM 7.625" (10 Bolt)3.23 and HigherEmpty CaseOpenUse with Internal Kit XL-4042
View on
Amazon

Heavy Duty

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 3.2L V6 USA26018
🇺🇸 US
Yukon Dura Grip
Fitment notes — USA STANDARD GEAR USA26018
Yukon Dura Grip
Rear4WDPositractionGM 7.5" & 7.625" Rear3.23 & Up Ratios28 Spline
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 3.2L V6 GM76L
🇺🇸 US 🇨🇦 CA
RearGM 7.625" (10 Bolt)
Fitment notes — MOTIVE GEAR GM76L
RearGM 7.625" (10 Bolt)3.23 and HigherOpen Loaded Case
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA20089
🇺🇸 US
Carrier caseDifferent Hole Sizes
Fitment notes — USA STANDARD GEAR USA20089
Carrier caseDifferent Hole Sizes
Rear4WDGM 7.5" and 7.6"Standard Open CaseGear Ratio 3.23 and Up
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA20102
🇺🇸 US
Carrier case
Fitment notes — USA STANDARD GEAR USA20102
Carrier case
Rear4WDGM 7.5" and 7.6"StandardLoaded3.23 and Up Carrier Break1 Large and 1 Small Window
View on
Amazon

This table covers the carriers that hold the differential gears in the axle.

Differential Carrier Bearing / Race

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS Popular Fits: 3.2L V6 WTA35
🇺🇸 US 🇨🇦 CA
Bearing Shape: CylindricalBearing & Race Set
Fitment notes — WJB / INMOTION PARTS WTA35
Bearing Shape: CylindricalBearing & Race Set
Front4WD10 Bolt(s)with 7.625 IN Ring Gearwith Isuzu AxleIndependent front suspension
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WTLM501310
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — WJB / INMOTION PARTS WTLM501310
Race
Front
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WTA36
🇺🇸 US 🇨🇦 CA
Rearwith AAM Axle
Fitment notes — WJB / INMOTION PARTS WTA36
Rearwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 3.2L V6 A35
🇺🇸 US 🇨🇦 CA
GoldIncludes LM501349 & LM501310
Fitment notes — ACDELCO A35
GoldIncludes LM501349 & LM501310Taper Bearing Set
Frontwith 7.625 IN Diameter Ring Gear
View on
Amazon
SKF Popular Fits: 3.2L V6 BR35
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
TIMKEN Popular Fits: 3.2L V6 LM501314
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — TIMKEN LM501314
Race
Rear7.63", 8.50" Ring Gear
View on
Amazon
TIMKEN Popular Fits: 3.2L V6 LM501349
🇺🇸 US 🇨🇦 CA
Rear7.63", 8.50" Ring Gear
View on
Amazon
ACDELCO Fits: 3.2L V6 A36
🇺🇸 US 🇨🇦 CA
GoldSet
Fitment notes — ACDELCO A36
GoldSetIncludes LM603049 & LM603012, Cup and ConeTaper Bearing Set
Rearwith 8.5/8.6 IN Diameter Ring Gear
View on
Amazon
BCA Fits: 3.2L V6 NBA35
🇺🇸 US 🇨🇦 CA
Bearing Shape: Cylindrical or Taper Bearing SetBearing & Race
Fitment notes — BCA NBA35
Bearing Shape: Cylindrical or Taper Bearing SetBearing & Race
Fits:
Frontwith Square 10 Bolt Housing Cover
or:
Front4WD10 Boltwith Isuzu Axlewith 7.625 IN Ring Gear
View on
Amazon
BCA Fits: 3.2L V6 NBA36
🇺🇸 US 🇨🇦 CA
Taper Bearing SetIncludes Cup and Cone
Fitment notes — BCA NBA36
Taper Bearing SetIncludes Cup and Cone
Rearwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon
DANA Fits: 3.2L V6 706032X
🇺🇸 US 🇨🇦 CA
Spicer
Fitment notes — DANA 706032X
Spicer
Rearfor OE#'S 8970844290with Dana 44 Axlefor Differential Side Bearings Only
View on
Amazon
NSK Fits: 3.2L V6 TRB45
🇺🇸 US 🇨🇦 CA
Bearing & Race SetKit Contents: 1 Cup, 1 Cone
Fitment notes — NSK TRB45
Bearing & Race SetKit Contents: 1 Cup, 1 Cone
Front4WDID 41.3 mm
View on
Amazon
SCHAEFFLER Fits: 3.2L V6 LM501314
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — SCHAEFFLER LM501314
Race
Rear16.604 mm Width73.431 mm Outside Diameter
View on
Amazon
SCHAEFFLER Fits: 3.2L V6 KLM501349
🇺🇸 US 🇨🇦 CA
Bearing Only
Fitment notes — SCHAEFFLER KLM501349
Bearing Only
Fits:
Front
or:
Rear7.50", 7.60" Ring Gears
View on
Amazon
SCHAEFFLER Fits: 3.2L V6 KT45
🇺🇸 US 🇨🇦 CA
Bearing and Race Set
Fitment notes — SCHAEFFLER KT45
Bearing and Race Set
Front41.275 mm Inside Diameter X 73.431 mm Outside Diameter X 19.558 mm Thick
View on
Amazon
SKF Fits: 3.2L V6 LM501310VP
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — SKF LM501310VP
Race
Front
View on
Amazon
SKF Fits: 3.2L V6 LM501314VP
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — SKF LM501314VP
Race
Rearwith 7.50, 7.60 Ring Gear
View on
Amazon
SKF Fits: 3.2L V6 BR72
🇺🇸 US 🇨🇦 CA
Rearwith 7.50, 7.60 Ring Gear
View on
Amazon
TIMKEN Fits: 3.2L V6 25523
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — TIMKEN 25523
Race
RearDana/Spicer 44-3 Axle
View on
Amazon
TIMKEN Fits: 3.2L V6 SET45
🇺🇸 US 🇨🇦 CA
Bearing & Race Set Bearing and Race Set
Fitment notes — TIMKEN SET45
Bearing & Race Set Bearing and Race Set
Front4WD10 Bolt Housing Cover
View on
Amazon
TIMKEN Fits: 3.2L V6 25590
🇺🇸 US 🇨🇦 CA
RearDana/Spicer 44-3 Axle
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA57008
🇺🇸 US
Includes Carrier Bearings, Races, Shims
Fitment notes — USA STANDARD GEAR USA57008
Includes Carrier Bearings, Races, Shims
Rear4WDGM 7.5" and 7.6"
View on
Amazon

This table covers the bearings and races that support the differential carrier.

Differential Carrier Shim

Brand Part Number Markets Notes Buy
MOTIVE GEAR Popular Fits: 3.2L V6 SS10
🇺🇸 US 🇨🇦 CA
Differential Carrier Shim Kit
Fitment notes — MOTIVE GEAR SS10
Differential Carrier Shim Kit
RearGM 7.5"/7.625"
View on
Amazon
RICHMOND Popular Fits: 3.2L V6 3800061
🇺🇸 US 🇨🇦 CA
Kit
Fitment notes — RICHMOND 3800061
Kit
RearGM 7.5"/7.625"
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 GM10MCSK
🇺🇸 US 🇨🇦 CA
Carrier And Pinion Shim Kit
Fitment notes — MOTIVE GEAR GM10MCSK
Carrier And Pinion Shim Kit
RearGM 8.2"
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 GM75MSK
🇺🇸 US 🇨🇦 CA
Carrier And Pinion Shim Kit
Fitment notes — MOTIVE GEAR GM75MSK
Carrier And Pinion Shim Kit
RearGM 7.5"/7.625" (10 Bolt)
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA16047
🇺🇸 US
Eaton Posi Shim Kit
Fitment notes — USA STANDARD GEAR USA16047
Eaton Posi Shim Kit
Rear4WDGM 7.5" and 7.6"
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA55001
🇺🇸 US
Super Carrier Shim Kit
Fitment notes — USA STANDARD GEAR USA55001
Super Carrier Shim Kit
Rear Differential4WDGM 7.5" and 7.6"Carrier shim KitInterlocking design2.880" OD
View on
Amazon

This table covers the Differential Carrier shims.

Differential Clutch Guide

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 3.2L V6 USA33251
🇺🇸 US
Differential Clutch Pack
Fitment notes — USA STANDARD GEAR USA33251
Differential Clutch Pack
Rear Differential4WDGM 7.5" and 7.6"Dura Grip
View on
Amazon

This table covers the Differential Clutch guides.

Differential Clutch Pack

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 3.2L V6 USA16119
🇺🇸 US
Spider GearOnly works with a Dura Grip case
Fitment notes — USA STANDARD GEAR USA16119
Spider GearOnly works with a Dura Grip case
Rear4WDGM 7.5" and 7.6"14 Carbon Clutches
View on
Amazon

This table covers the clutch packs in a limited-slip or locking differential.

Differential Clutch Plate

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 3.2L V6 USA16118
🇺🇸 US 🇨🇦 CA
Eaton-type 14 plate Carbon Clutches
Fitment notes — USA STANDARD GEAR USA16118
Eaton-type 14 plate Carbon Clutches
Rear4WDGM 7.5" & 7.6"
View on
Amazon

This table covers the Differential Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Differential Cover

Brand Part Number Markets Notes Buy
AAM Fits: 3.2L V6 12471370
🇺🇸 US 🇨🇦 CA
with 10 Bolt Coverwith 7.6 (In) Rear Axle
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA32014
🇺🇸 US
Chrome
Fitment notes — USA STANDARD GEAR USA32014
Chrome
Rear4WDGM 7.5" and 7.6"
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA32331
🇺🇸 US
Steel
Fitment notes — USA STANDARD GEAR USA32331
Steel
Rear4WDGM 7.5" and 7.6"
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA32118
🇺🇸 US
Rear4WD
Fitment notes — USA STANDARD GEAR USA32118
Rear4WDGM 7.5" and 7.6"Aluminum Girdle
View on
Amazon

This table covers the Differential covers.

Differential Cover Bolt

Brand Part Number Markets Notes Buy
DANA Fits: 3.2L V6 34279
🇺🇸 US 🇨🇦 CA
Spicer
Fitment notes — DANA 34279
Spicer
Rearwith GM 7.5 & 7.6 Axles
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA33572
🇺🇸 US
22.5mm longMetric M8 x 1.25 thread
Fitment notes — USA STANDARD GEAR USA33572
22.5mm longMetric M8 x 1.25 thread
Rear4WDGM 7.5" and 7.6"M8X1.25
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA33286
🇺🇸 US
5/8" longSAE 5/16"-18 thread
Fitment notes — USA STANDARD GEAR USA33286
5/8" longSAE 5/16"-18 thread
Rear4WDGM 7.5" and 7.6"Rear Cover Bolt-1/2" Head-5/16-18
View on
Amazon

This table covers the Differential Cover bolts.

Differential Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 3.2L V6 RDS550281
🇺🇸 US 🇨🇦 CA
Rearwith 8.625 (In) Ring Gear
Fitment notes — FEL-PRO RDS550281
Rearwith 8.625 (In) Ring Gearwith AAM Differentialwith 10 Bolt HolesPaper GasketAxle Housing Cover
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 5110
🇺🇸 US 🇨🇦 CA
RearGM 7.5"/7.625" (10 Bolt)
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA23018
🇺🇸 US
Differential Gasket
Fitment notes — USA STANDARD GEAR USA23018
Differential Gasket
Rear4WDGM 7.5" and 7.6"
View on
Amazon
VICTOR REINZ Fits: 3.2L V6 711482200
🇺🇸 US 🇨🇦 CA
Rearwith 8.625 IN Ring Gear
Fitment notes — VICTOR REINZ 711482200
Rearwith 8.625 IN Ring Gearwith Engine Code AAM10 BoltAxle Housing Cover
View on
Amazon
VICTOR REINZ Fits: 3.2L V6 711956700
🇺🇸 US 🇨🇦 CA
with GM 7.5" Axle(s)Carrier Gasket
View on
Amazon

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Differential Cross Pin

Brand Part Number Markets Notes Buy
RICHMOND Popular Fits: 3.2L V6 XL5630
🇺🇸 US 🇨🇦 CA
EXCelDifferential Pinion Shaft
Fitment notes — RICHMOND XL5630
EXCelDifferential Pinion Shaft
RearFor GM 7.5"/7.625"
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 26041321
🇺🇸 US 🇨🇦 CA
Differential Pinion Shaft
Fitment notes — MOTIVE GEAR 26041321
Differential Pinion Shaft
RearGM 7.5"/7.625" (10 Bolt)
View on
Amazon
RICHMOND Fits: 3.2L V6 CSPGM75
🇺🇸 US 🇨🇦 CA
Differential Pinion Shaft
Fitment notes — RICHMOND CSPGM75
Differential Pinion Shaft
RearGM 7.5"/7.625" (10 Bolt)
View on
Amazon
RICHMOND Fits: 3.2L V6 8002701
🇺🇸 US 🇨🇦 CA
Differential Pinion Shaft
Fitment notes — RICHMOND 8002701
Differential Pinion Shaft
RearGM 7.5"/7.625" (10 Bolt)Notched To Clearance High Numeric RatiosWill Not Work In Mini-Spool or Limited Slip Applications
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA33435
🇺🇸 US
Rear4WD
Fitment notes — USA STANDARD GEAR USA33435
Rear4WDGM 7.5" and 7.6"Notched
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA33404
🇺🇸 US
Rear4WD
Fitment notes — USA STANDARD GEAR USA33404
Rear4WDGM 7.5" and 7.6"
View on
Amazon

This table covers the Differential Cross pins.

Differential Crush Sleeve

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 3.2L V6 USA33110
🇺🇸 US
Rear4WD
Fitment notes — USA STANDARD GEAR USA33110
Rear4WDGM 7.5" and 7.6".625 in. Long
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA55047
🇺🇸 US
Rear4WD
Fitment notes — USA STANDARD GEAR USA55047
Rear4WDGM 7.5" and 7.6"Solid
View on
Amazon

This table covers the Differential Crush sleeves.

Differential Gear Installation Kit

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 3.2L V6 GM76IK
🇺🇸 US 🇨🇦 CA
Differential Gear Install Kit
Fitment notes — MOTIVE GEAR GM76IK
Differential Gear Install Kit
Rear AxleGM 7.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 GM75IK
🇺🇸 US 🇨🇦 CA
Differential Gear Install Kit
Fitment notes — MOTIVE GEAR GM75IK
Differential Gear Install Kit
Rear AxleGM 7.5"/7.625" (10 Bolt)
View on
Amazon
RICHMOND Fits: 3.2L V6 831083B
🇺🇸 US 🇨🇦 CA
Install Kit Includes Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
Fitment notes — RICHMOND 831083B
Install Kit Includes Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
Rear AxleGM 7.625" (10 Bolt)
View on
Amazon

This table covers the Differential Gear Installation kits.

Differential Lock Spring

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 3.2L V6 USA33206
🇺🇸 US
4WDGM 7.5" and 7.6"
Fitment notes — USA STANDARD GEAR USA33206
4WDGM 7.5" and 7.6"with Preload Plates
View on
Amazon

This table covers the Differential Lock springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Differential Pinion Bearing / Race

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS Popular Fits: 3.2L V6 WTM88048
🇺🇸 US 🇨🇦 CA
Bearing Shape: Cylindrical
Fitment notes — WJB / INMOTION PARTS WTM88048
Bearing Shape: Cylindrical
Rear Outerwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon
FAMOUS BRAND Fits: 3.2L V6 SM802011
🇺🇸 US 🇨🇦 CA
RearInner
Fitment notes — FAMOUS BRAND SM802011
RearInnerAAM8.625" R.G.
View on
Amazon
FAMOUS BRAND Fits: 3.2L V6 SM88010
🇺🇸 US 🇨🇦 CA
RearOuter
Fitment notes — FAMOUS BRAND SM88010
RearOuterCup Bore 2.68"Cup Length .687"AAM 8.625" Ring Gear1st Design
View on
Amazon
FAMOUS BRAND Fits: 3.2L V6 SM802048
🇺🇸 US 🇨🇦 CA
RearInner
Fitment notes — FAMOUS BRAND SM802048
RearInnerAAM8.625" R.G.
View on
Amazon
ULTRA-POWER Fits: 3.2L V6 WTM88048
🇺🇸 US 🇨🇦 CA
RearOUTER
Fitment notes — ULTRA-POWER WTM88048
RearOUTERAAM AXLE8.625" RING GEAR
View on
Amazon
ULTRA-POWER Fits: 3.2L V6 WTM802048
🇺🇸 US 🇨🇦 CA
RearINNER
Fitment notes — ULTRA-POWER WTM802048
RearINNERAAM AXLE8.625" RING GEAR
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WTM802011
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — WJB / INMOTION PARTS WTM802011
Race
Rear Innerwith AAM Differentialwith 8.625 IN Ring Gear
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WTM88010
🇺🇸 US 🇨🇦 CA
RaceCup Outside Diameter (In): 2.6880000000000002 In
Fitment notes — WJB / INMOTION PARTS WTM88010
RaceCup Outside Diameter (In): 2.6880000000000002 In
Rear Outerwith AAM Differentialwith 8.625 IN Ring Gear
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WT30306
🇺🇸 US 🇨🇦 CA
Bearing & Race Set
Fitment notes — WJB / INMOTION PARTS WT30306
Bearing & Race Set
Front Outer4WD10 Bolt(s)with 7.625 IN Ring Gearwith Isuzu AxleIndependent front suspension
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WTM802048
🇺🇸 US 🇨🇦 CA
Bearing Shape: Cylindrical
Fitment notes — WJB / INMOTION PARTS WTM802048
Bearing Shape: Cylindrical
Rear Innerwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WT32307
🇺🇸 US 🇨🇦 CA
Front Inner4WD
Fitment notes — WJB / INMOTION PARTS WT32307
Front Inner4WD10 Bolt(s)with 7.625 IN Ring Gearwith Isuzu AxleIndependent front suspension
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
SKF Popular Fits: 3.2L V6 BR52
🇺🇸 US 🇨🇦 CA
Rear Outer
View on
Amazon
TIMKEN Popular Fits: 3.2L V6 M88010
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — TIMKEN M88010
Race
Rear OuterGM Axle - 8.50" Ring Gear
View on
Amazon
TIMKEN Popular Fits: 3.2L V6 M802011
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — TIMKEN M802011
Race
Rear InnerGM Axle - 8.50" Ring Gear
View on
Amazon
TIMKEN Popular Fits: 3.2L V6 M88048
🇺🇸 US 🇨🇦 CA
Rear OuterGM Axle - 8.50" Ring Gear
View on
Amazon
TIMKEN Popular Fits: 3.2L V6 M802048
🇺🇸 US 🇨🇦 CA
Rear InnerGM Axle - 8.50" Ring Gear
View on
Amazon
BCA Fits: 3.2L V6 NBM88010
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — BCA NBM88010
Race
Rear Outerwith AAM Axle(s)with 8.625 IN Ring Gear
View on
Amazon
BCA Fits: 3.2L V6 NBM802011
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — BCA NBM802011
Race
Rear Innerwith AAM Axle(s)with 8.625 IN Ring Gear
View on
Amazon
BCA Fits: 3.2L V6 NBM88048
🇺🇸 US 🇨🇦 CA
Bearing Shape: Cylindrical
Fitment notes — BCA NBM88048
Bearing Shape: Cylindrical
Rear Outerwith AAM Axle(s)with 8.625 IN Ring Gear
View on
Amazon
BCA Fits: 3.2L V6 NBM802048
🇺🇸 US 🇨🇦 CA
Bearing Shape: Cylindrical
Fitment notes — BCA NBM802048
Bearing Shape: Cylindrical
Rear Innerwith AAM Axle(s)with 8.625 IN Ring Gear
View on
Amazon
BCA Fits: 3.2L V6 NBBR52
🇺🇸 US 🇨🇦 CA
Bearing & Race
Fitment notes — BCA NBBR52
Bearing & Race
Rear Outerwith AAM Axle(s)with 8.625 IN Ring Gear
View on
Amazon
BCA Fits: 3.2L V6 NB30306
🇺🇸 US 🇨🇦 CA
Taper Bearing SetIncludes Cup and Cone
Fitment notes — BCA NB30306
Taper Bearing SetIncludes Cup and Cone
Front Outer10 Bolt(s)with Isuzu Axle(s)with 7.625 IN Ring Gearwith Independent Front Suspension
View on
Amazon
BCA Fits: 3.2L V6 NB32307
🇺🇸 US 🇨🇦 CA
Front Inner10 Bolt(s)
Fitment notes — BCA NB32307
Front Inner10 Bolt(s)with Isuzu Axle(s)with 7.625 IN Ring Gearwith Independent Front Suspension
View on
Amazon
DANA Fits: 3.2L V6 707064X
🇺🇸 US 🇨🇦 CA
Spicer
Fitment notes — DANA 707064X
Spicer
Rear InnerInner PinionFor OE#'s 8971799380
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 706016XR
🇺🇸 US 🇨🇦 CA
Koyo Bearings
Fitment notes — MOTIVE GEAR 706016XR
Koyo Bearings
RearGM 7.5"/7.625"
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 R75GRLTPK
🇺🇸 US 🇨🇦 CA
Pinion Bearing Kit Includes Timken Pinion Bearings, Brush, Crush Sleeve, Marking Compound, Pinion Nut, Pinion Seal, Pinion Shims, and Thread Locking Compound
Fitment notes — MOTIVE GEAR R75GRLTPK
Pinion Bearing Kit Includes Timken Pinion Bearings, Brush, Crush Sleeve, Marking Compound, Pinion Nut, Pinion Seal, Pinion Shims, and Thread Locking Compound
RearGM 7.625" (10 Bolt)Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 707064XR
🇺🇸 US 🇨🇦 CA
Koyo Bearings
Fitment notes — MOTIVE GEAR 707064XR
Koyo Bearings
Rear InnerDana 80 Differential
View on
Amazon
NATIONAL Fits: 3.2L V6 M88010
🇺🇸 US 🇨🇦 CA
Taper Bearing Cup
Fitment notes — NATIONAL M88010
Taper Bearing Cup
Rear Outerwith 8.625 IN Ring Gearwith AAM Differential
View on
Amazon
NATIONAL Fits: 3.2L V6 M802011
🇺🇸 US 🇨🇦 CA
Taper Bearing Cup
Fitment notes — NATIONAL M802011
Taper Bearing Cup
Rear Innerwith 8.625 IN Ring Gearwith AAM Differential
View on
Amazon
SCHAEFFLER Fits: 3.2L V6 M88010
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — SCHAEFFLER M88010
Race
Fits:
Front17.462 mm Width68.262 mm Outside Diameter
or:
Rear Outer17.462 mm Width68.262 mm Outside Diameter
View on
Amazon
SCHAEFFLER Fits: 3.2L V6 M802011
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — SCHAEFFLER M802011
Race
Rear Inner20.193 mm Width82.55 mm Outside Diameter
View on
Amazon
SCHAEFFLER Fits: 3.2L V6 KM802048
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
SCHAEFFLER Fits: 3.2L V6 KT63
🇺🇸 US 🇨🇦 CA
Rear Outer
View on
Amazon
SCHAEFFLER Fits: 3.2L V6 KM88048
🇺🇸 US 🇨🇦 CA
Rear Outer1.313 In Inside Diameter X 2.688 In Outside Diameter X 0.875 In Thick
View on
Amazon
SCHAEFFLER Fits: 3.2L V6 32307A
🇺🇸 US 🇨🇦 CA
Front Inner32.75 mm Width
Fitment notes — SCHAEFFLER 32307A
Front Inner32.75 mm Width80 mm Outside Diameter35 MM Inside Diameter
View on
Amazon
SCHAEFFLER Fits: 3.2L V6 30306A
🇺🇸 US 🇨🇦 CA
Bearing & Race Set
Fitment notes — SCHAEFFLER 30306A
Bearing & Race Set
Front Outer30 MM Inside Diameter X 72 mm Outside Diameter X 20.75 mm Thick
View on
Amazon
SKF Fits: 3.2L V6 M88010VP
🇺🇸 US 🇨🇦 CA
Race
Fitment notes — SKF M88010VP
Race
Rear Outer
View on
Amazon
SKF Fits: 3.2L V6 M802011
🇺🇸 US 🇨🇦 CA
Rear Inner
View on
Amazon
SKF Fits: 3.2L V6 M802011VP
🇺🇸 US 🇨🇦 CA
RaceTapered
Fitment notes — SKF M802011VP
RaceTapered
Rear Inner
View on
Amazon
SKF Fits: 3.2L V6 BR30306
🇺🇸 US 🇨🇦 CA
Front Outer
View on
Amazon
SKF Fits: 3.2L V6 M802048011
🇺🇸 US 🇨🇦 CA
Tapered Roller Bearing Set (Bearing and Race)
Fitment notes — SKF M802048011
Tapered Roller Bearing Set (Bearing and Race)
Rear Inner
View on
Amazon
SKF Fits: 3.2L V6 BR32307
🇺🇸 US 🇨🇦 CA
Front Inner
View on
Amazon
TIMKEN Fits: 3.2L V6 30306
🇺🇸 US 🇨🇦 CA
Front Outer4WD
Fitment notes — TIMKEN 30306
Front Outer4WD10 Bolt Housing Cover
View on
Amazon
TIMKEN Fits: 3.2L V6 32307
🇺🇸 US 🇨🇦 CA
7.5" R.G.1.378 Cone Bore
Fitment notes — TIMKEN 32307
7.5" R.G.1.378 Cone Bore1.2205 Cone Width3.1496 Cup Outer Diam0.9843 Cup Width
Front Inner4WD10 Bolt Housing Cover
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 ZPKGM75C
🇺🇸 US
Rear4WD
Fitment notes — USA STANDARD GEAR ZPKGM75C
Rear4WDGM 7.5" and 7.625" 10 Boltpinion Bearing Kit
View on
Amazon

This table covers the bearings and races on the differential pinion.

Differential Pinion Bearing Baffle

Brand Part Number Markets Notes Buy
AAM Fits: 3.2L V6 9785792
🇺🇸 US 🇨🇦 CA
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 4111
🇺🇸 US 🇨🇦 CA
Differential Pinion Bearing Spacer
Fitment notes — MOTIVE GEAR 4111
Differential Pinion Bearing Spacer
RearGM 7.5"/7.625"
View on
Amazon

This table covers the baffles that control oil at the pinion bearings.

Differential Pinion Nut

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 3.2L V6 1260823
🇺🇸 US 🇨🇦 CA
Differential Pinion Shaft NutPinion Nut
Fitment notes — MOTIVE GEAR 1260823
Differential Pinion Shaft NutPinion Nut
RearGM 7.5"/7.625"
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA33152
🇺🇸 US
Differential Pinion Shaft Nut
Fitment notes — USA STANDARD GEAR USA33152
Differential Pinion Shaft Nut
Rear4WDGM 7.5" and 7.6"pinion Shaft Nut-7/8-14 Thread
View on
Amazon

This table covers the Differential Pinion nuts.

Differential Pinion Repair Sleeve

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 3.2L V6 USA41210
🇺🇸 US
Pinion Yoke Sleeve
Fitment notes — USA STANDARD GEAR USA41210
Pinion Yoke Sleeve
Rear4WDGM 7.5 & 7.625"Triple Lip Pinion Seal SleeveTo Use with Triple Lip Seal1.690" OD Hub DiameterInstalls onto 1.522 In. Yoke Hub
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA30221
🇺🇸 US
Pinion Redi-Sleeve
Fitment notes — USA STANDARD GEAR USA30221
Pinion Redi-Sleeve
Rear4WDGM 7.5" and 7.6"8.2"GM Yoke Saver
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WS99210
🇺🇸 US 🇨🇦 CA
Rear Outerwith AAM Axle
Fitment notes — WJB / INMOTION PARTS WS99210
Rear Outerwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon

This table covers the wear sleeves used to restore a grooved pinion seal surface.

Differential Pinion Seal

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 3.2L V6 710506
🇺🇸 US 🇨🇦 CA
Rear Outerwith 8.625 IN Ring Gear
Fitment notes — NATIONAL 710506
Rear Outerwith 8.625 IN Ring Gearwith AAM Axle
View on
Amazon
TIMKEN Popular Fits: 3.2L V6 8610
🇺🇸 US 🇨🇦 CA
Rear Outer7.63" Ring Gear - 1st Design - 1.5 in. Seal I.D.
View on
Amazon
WJB / INMOTION PARTS Popular Fits: 3.2L V6 WS710506
🇺🇸 US 🇨🇦 CA
Rear Outerwith AAM Axle
Fitment notes — WJB / INMOTION PARTS WS710506
Rear Outerwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon
ACDELCO Fits: 3.2L V6 710506
🇺🇸 US 🇨🇦 CA
Gold
Fitment notes — ACDELCO 710506
Gold
Rearwith 8.5 IN or 8.6 IN Ring Gear
View on
Amazon
BCA Fits: 3.2L V6 NS474133
🇺🇸 US 🇨🇦 CA
Front Outer10 Bolt(s)
Fitment notes — BCA NS474133
Front Outer10 Bolt(s)with Isuzu Axle(s)with 7.625 IN Ring Gearwith Independent Front Suspension
View on
Amazon
BCA Fits: 3.2L V6 NS710506
🇺🇸 US 🇨🇦 CA
Rear Outerwith AAM Axle
Fitment notes — BCA NS710506
Rear Outerwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 8610
🇺🇸 US 🇨🇦 CA
RearGM 7.5"/7.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 26064028
🇺🇸 US 🇨🇦 CA
RearGM Axle - 8.50" Ring Gear
Fitment notes — MOTIVE GEAR 26064028
RearGM Axle - 8.50" Ring GearGM 8.625 Differential
View on
Amazon
SKF Fits: 3.2L V6 18759
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
SKF Fits: 3.2L V6 17307
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
TIMKEN Fits: 3.2L V6 710474
🇺🇸 US 🇨🇦 CA
Rear Outer7.63" Ring Gear - 2nd Design - 1.69" Seal I.D.
View on
Amazon
TIMKEN Fits: 3.2L V6 710506
🇺🇸 US 🇨🇦 CA
RearGM Axle - 8.50" Ring Gear
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA30283
🇺🇸 US
Yukon Mighty Seal
Fitment notes — USA STANDARD GEAR USA30283
Yukon Mighty Seal
Rear4WDGM 7.5" and 7.6"Triple Lip Design
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WS474133
🇺🇸 US 🇨🇦 CA
Front Outer4WD
Fitment notes — WJB / INMOTION PARTS WS474133
Front Outer4WD10 Bolt(s)with 7.625 IN Ring Gearwith Isuzu AxleIndependent front suspension
View on
Amazon

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Differential Pinion Shaft Lock Bolt

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 3.2L V6 14056196
🇺🇸 US 🇨🇦 CA
RearGM 7.5"/7.625" (10 Bolt)
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA33067
🇺🇸 US
Differential Cross Pin Bolt
Fitment notes — USA STANDARD GEAR USA33067
Differential Cross Pin Bolt
Rear4WDGM 7.5" and 7.6",-5/16" x 18 Thread1.75" Long, Differential Cross Pin Bolt
View on
Amazon

This table covers the Differential Pinion Shaft Lock bolts.

Differential Pinion Shim

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Popular Fits: 3.2L V6 USA55008
🇺🇸 US
Rear Differential4WD
Fitment notes — USA STANDARD GEAR USA55008
Rear Differential4WDGM 7.5" and 7.6"pinion Depth shim Kit
View on
Amazon
EATON Fits: 3.2L V6 EAT3664
🇺🇸 US 🇨🇦 CA
.015" positraction shim.
Fitment notes — EATON EAT3664
.015" positraction shim.
Rear4WD
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 1104
🇺🇸 US 🇨🇦 CA
Pinion Shim Pack
Fitment notes — MOTIVE GEAR 1104
Pinion Shim Pack
Rear DifferentialGM 7.5"/7.625"2.25" OD1.45" ID
View on
Amazon
RICHMOND Fits: 3.2L V6 3800191
🇺🇸 US 🇨🇦 CA
Rear DifferentialGM 7.5"/7.625"
Fitment notes — RICHMOND 3800191
Rear DifferentialGM 7.5"/7.625"2.25" OD1.45" ID
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA55064
🇺🇸 US
Rear Differential4WD
Fitment notes — USA STANDARD GEAR USA55064
Rear Differential4WDGM 7.5" and 7.6"
View on
Amazon

This table covers the Differential Pinion shims.

Differential Rebuild Kit

Master Kit

Brand Part Number Markets Notes Buy
RICHMOND Popular Fits: 3.2L V6 XL10831
🇺🇸 US 🇨🇦 CA
EXCel
Fitment notes — RICHMOND XL10831
EXCel
RearFor GM 7.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 R75GRLMKT
🇺🇸 US 🇨🇦 CA
Master Bearing Kit Includes Timken Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve
Fitment notes — MOTIVE GEAR R75GRLMKT
Master Bearing Kit Includes Timken Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve
RearGM 7.625" (10 Bolt)Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 R10RLMKT
🇺🇸 US 🇨🇦 CA
with Timken Bearings
Fitment notes — MOTIVE GEAR R10RLMKT
with Timken Bearings
Rear8.5" or 8.625" Ring GearMaster KitGM 8.625 Differential
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 R75GRLMK
🇺🇸 US 🇨🇦 CA
Master Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve
Fitment notes — MOTIVE GEAR R75GRLMK
Master Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve
RearGM 7.625" (10 Bolt)Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal
View on
Amazon
RICHMOND Fits: 3.2L V6 8310831
🇺🇸 US 🇨🇦 CA
Master KitTimken Bearings
Fitment notes — RICHMOND 8310831
Master KitTimken Bearings
RearGM 7.625" (10 Bolt)
View on
Amazon
TIMKEN Fits: 3.2L V6 DRK321CMK
🇺🇸 US 🇨🇦 CA
Master Kit
Fitment notes — TIMKEN DRK321CMK
Master Kit
Rear8.5", 8.625" RING GEAR
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 ZKGM75C
🇺🇸 US
Differential Rebuild KitsIncludes Koyo Bearings, Triple Lip Pinion Seal
Fitment notes — USA STANDARD GEAR ZKGM75C
Differential Rebuild KitsIncludes Koyo Bearings, Triple Lip Pinion Seal
Rear4WDGM 7.5" and 7.6" 10 Bolt RearHM89210 / HM89249 pinion Bearing
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA14078
🇺🇸 US
Yukon Differential Master KitIncludes Timken Bearings, Triple Lip Pinion Seal
Fitment notes — USA STANDARD GEAR USA14078
Yukon Differential Master KitIncludes Timken Bearings, Triple Lip Pinion Seal
Rear4WDGM 7.5" and 7.6" RearHM89210 / HM89249 pinion Bearing
View on
Amazon

Standard Kit

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 3.2L V6 RA321C
🇺🇸 US 🇨🇦 CA
Rearwith 8.625 IN Ring Gear
Fitment notes — NATIONAL RA321C
Rearwith 8.625 IN Ring Gearwith AAM Axle
View on
Amazon
TIMKEN Popular Fits: 3.2L V6 DRK320
🇺🇸 US 🇨🇦 CA
Standard Kit
Fitment notes — TIMKEN DRK320
Standard Kit
Rear7.63" Ring Gear - 1st Design - 1.5 in. Seal I.D.
View on
Amazon
TIMKEN Popular Fits: 3.2L V6 DRK321C
🇺🇸 US 🇨🇦 CA
Standard Kit
Fitment notes — TIMKEN DRK321C
Standard Kit
Rear8.5", 8.625" RING GEAR
View on
Amazon
AAM Fits: 3.2L V6 74067006
🇺🇸 US 🇨🇦 CA
with 7.5 /7.6 (In) Rear Axle
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 R75GRL
🇺🇸 US 🇨🇦 CA
Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve or Preload Shim Pack
Fitment notes — MOTIVE GEAR R75GRL
Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve or Preload Shim Pack
RearGM 7.625" (10 Bolt)Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 R75GRLT
🇺🇸 US 🇨🇦 CA
Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve or P
Fitment notes — MOTIVE GEAR R75GRLT
Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve or P
RearGM 7.625" (10 Bolt)Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 ZBKGM75C
🇺🇸 US
Standard KitsIncludes Koyo Bearings, Pinion Bearings, Carrier Bearings, Crush Sleeve, Pinion Seal
Fitment notes — USA STANDARD GEAR ZBKGM75C
Standard KitsIncludes Koyo Bearings, Pinion Bearings, Carrier Bearings, Crush Sleeve, Pinion Seal
Rear4WDGM 7.5"/7.625" 10 Bolt
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WKRA321C
🇺🇸 US 🇨🇦 CA
Rearwith AAM Axle
Fitment notes — WJB / INMOTION PARTS WKRA321C
Rearwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon

This table covers kits that group the bearings, races and seals for a differential rebuild.

Differential Ring and Pinion

Economy

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 3.2L V6 697713
🇺🇸 US 🇨🇦 CA
Rear7.5" Ring Gear
Fitment notes — DORMAN 697713
Rear7.5" Ring Gear7.625" Ring GearCarrier Break 3.08/3.23with 2.73 Axle Ratio
View on
Amazon
RICHMOND Popular Fits: 3.2L V6 GM75OE
🇺🇸 US 🇨🇦 CA
EXCel
Fitment notes — RICHMOND GM75OE
EXCel
Fits:
RearFor GM 7.5"/7.625" (10 Bolt)
or:
RearGM 7.6 IFS Differential
View on
Amazon
RICHMOND Popular Fits: 3.2L V6 GM75TK
🇺🇸 US 🇨🇦 CA
EXCel
Fitment notes — RICHMOND GM75TK
EXCel
Fits:
RearFor GM 7.5"/7.625" (10 Bolt)Thick Ring GearRequires a 3.08 and Numerically Lower Ratio Carrier
or:
RearFor GM 7.5"/7.625" (10 Bolt)Thick Ring GearRequires a 3.23 and Numerically Higher Ratio CarrierRequires Notched Cross Shaft 80-0270-1 For Open Carriers
or:
RearGM 7.625 Differential
View on
Amazon
RICHMOND Popular Fits: 3.2L V6 GM75
🇺🇸 US 🇨🇦 CA
EXCel
Fitment notes — RICHMOND GM75
EXCel
Fits:
RearFor GM 7.5"/7.625" (10 Bolt)Requires Notched Cross Shaft 80-0270-1 For Open Carriers
or:
RearGM 7.625 Differential
View on
Amazon
DANA Fits: 3.2L V6 2020639
🇺🇸 US 🇨🇦 CA
SVL
Fitment notes — DANA 2020639
SVL
Rearwith 3.23 Gear Ratiowith GM 7.5 Axle
View on
Amazon
DANA Fits: 3.2L V6 2020395
🇺🇸 US 🇨🇦 CA
SVL
Fitment notes — DANA 2020395
SVL
Rearwith 3.73 Gear Ratiowith GM 7.5 Axle
View on
Amazon
DANA Fits: 3.2L V6 10004593
🇺🇸 US 🇨🇦 CA
SVL
Fitment notes — DANA 10004593
SVL
RearBolts Not Includedwith 2.73 Gear Ratiowith GM 7.5 & 7.6 Axles
View on
Amazon
DANA Fits: 3.2L V6 2019331
🇺🇸 US 🇨🇦 CA
SVL
Fitment notes — DANA 2019331
SVL
Rearwith 3.08 Gear Ratiowith GM 7.5 Axle
View on
Amazon
DANA Fits: 3.2L V6 10035672
🇺🇸 US 🇨🇦 CA
SVL
Fitment notes — DANA 10035672
SVL
Rearwith 4.56 Gear Ratiowith GM 7.5 & 7.6 Axleswith Thick Gear
View on
Amazon
DANA Fits: 3.2L V6 10035667
🇺🇸 US 🇨🇦 CA
SVL
Fitment notes — DANA 10035667
SVL
Rearwith 3.90 Gear Ratiowith GM 7.5 & 7.6 Axleswith Thick Gear
View on
Amazon
DORMAN Fits: 3.2L V6 697714
🇺🇸 US 🇨🇦 CA
Rear7.5" Ring Gear
Fitment notes — DORMAN 697714
Rear7.5" Ring Gear7.625" Ring GearCarrier Break 3.08/3.23with 3.23 Axle Ratio
View on
Amazon
DORMAN Fits: 3.2L V6 697302
🇺🇸 US 🇨🇦 CA
Rear7.5" Ring Gear
Fitment notes — DORMAN 697302
Rear7.5" Ring Gear7.625" Ring GearStandard Gearwith 3.42 Axle Ratio
View on
Amazon
DORMAN Fits: 3.2L V6 697306
🇺🇸 US 🇨🇦 CA
Rear7.5" Ring Gear
Fitment notes — DORMAN 697306
Rear7.5" Ring Gear7.625" Ring Gearwith 4.10 Axle Ratio
View on
Amazon
DORMAN Fits: 3.2L V6 697304
🇺🇸 US 🇨🇦 CA
Rear7.5" Ring Gear
Fitment notes — DORMAN 697304
Rear7.5" Ring Gear7.625" Ring GearStandard Gearwith 3.73 Axle Ratio
View on
Amazon

High Performance

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 3.2L V6 G875X
🇺🇸 US 🇨🇦 CA
Performance
Fitment notes — MOTIVE GEAR G875X
Performance
RearGM 7.5"/7.625" (10 Bolt)Thick Ring GearRequires a 3.08 and Numerically Lower Ratio Carrier
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 G875
🇺🇸 US 🇨🇦 CA
Performance26 Spline or 28 Spline
Fitment notes — MOTIVE GEAR G875
Performance26 Spline or 28 Spline
Fits:
RearGM 7.625 Differential
or:
Rear7.5" Ring Gear7.625" Ring GearCarrier Break 3.08/3.23with 2.73 Axle RatioGM 7.625 Differential
or:
RearGM 7.5"/7.625" (10 Bolt)Requires Notched Cross Shaft 80-0270-1 For Open Carriers
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 G975
🇺🇸 US 🇨🇦 CA
Performance
Fitment notes — MOTIVE GEAR G975
Performance
RearGM 7.5"/7.625" (10 Bolt)PRO Gear (Gear Ratio: 3.90 Gear Ratio)
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
RICHMOND Popular Fits: 3.2L V6 4900441
🇺🇸 US 🇨🇦 CA
RearGM 7.5"/7.625" (10 Bolt)
View on
Amazon
AAM Fits: 3.2L V6 40020428
🇺🇸 US 🇨🇦 CA
with 3.73 Axle Ratiowith 7.6 (In) Rear Axle
View on
Amazon
AAM Fits: 3.2L V6 40020431
🇺🇸 US 🇨🇦 CA
with 4.10 Axle Ratiowith 7.6 (In) Rear Axle
View on
Amazon
AAM Fits: 3.2L V6 40022978
🇺🇸 US 🇨🇦 CA
with 3.42 Axle Ratiowith 7.6 (In) Rear Axle
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 GM75A
🇺🇸 US 🇨🇦 CA
A-Line Ring and Pinion
Fitment notes — MOTIVE GEAR GM75A
A-Line Ring and Pinion
RearGM 7.5"/7.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 GM75
🇺🇸 US 🇨🇦 CA
26 Spline or 28 Spline
Fitment notes — MOTIVE GEAR GM75
26 Spline or 28 Spline
Fits:
RearGM 7.625 Differential
or:
Rear7.5" Ring Gear7.625" Ring GearStandard Gearwith 3.42 Axle RatioGM 7.625 Differential
or:
Rear7.5" Ring Gear7.625" Ring GearStandard Gearwith 3.73 Axle RatioGM 7.625 Differential
or:
Rear7.5" Ring Gear7.625" Ring Gearwith 4.10 Axle RatioGM 7.625 Differential
or:
Rear7.5" Ring Gear7.625" Ring GearCarrier Break 3.08/3.23with 3.23 Axle RatioGM 7.625 Differential
or:
RearGM 7.5"/7.625" (10 Bolt)
View on
Amazon
RICHMOND Fits: 3.2L V6 4900051
🇺🇸 US 🇨🇦 CA
RearGM 7.5"/7.625" (10 Bolt)
Fitment notes — RICHMOND 4900051
RearGM 7.5"/7.625" (10 Bolt)Thick Ring GearRequires a 3.08 and Numerically Lower Ratio Carrier
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 ZGGM75
🇺🇸 US 🇨🇦 CA
Ring Gear Diam: 7.5"Differential Cover Bolts: 10
Fitment notes — USA STANDARD GEAR ZGGM75
Ring Gear Diam: 7.5"Differential Cover Bolts: 10Ring Gear Bolts: 10pinion Splines: 27
4WDRearGM 7.5" / 7.6"
View on
Amazon

This table covers the ring-and-pinion gear sets that set the axle ratio.

Differential Ring Gear Bolt

Brand Part Number Markets Notes Buy
AAM Fits: 3.2L V6 40061033
🇺🇸 US 🇨🇦 CA
7/16" x 20 x .88" - Left Hand 6 PT Serrated Hex with Adhesivewith 7.6 (In) Rear Axle
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 14066913
🇺🇸 US 🇨🇦 CA
Ring Gear Bolt
Fitment notes — MOTIVE GEAR 14066913
Ring Gear Bolt
Rear DifferentialGM 7.5"/7.625"
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 PB1792L
🇺🇸 US 🇨🇦 CA
Rear DifferentialGM 7.5"/7.625"
Fitment notes — MOTIVE GEAR PB1792L
Rear DifferentialGM 7.5"/7.625"Extended Length For Use with Gear Spacer
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA33049
🇺🇸 US 🇨🇦 CA
Rear Differential4WD
Fitment notes — USA STANDARD GEAR USA33049
Rear Differential4WDGM 7.5" and 7.6", Ring Gear BoltLeft Hand Thread, -7/16-20UNF
View on
Amazon

This table covers the Differential Ring Gear bolts.

Differential Spider Gear

Economy

Brand Part Number Markets Notes Buy
RICHMOND Popular Fits: 3.2L V6 XL4042
🇺🇸 US 🇨🇦 CA
ExcelDifferential Carrier Gear Kit
Fitment notes — RICHMOND XL4042
ExcelDifferential Carrier Gear Kit28 SplineIncludes Side and Pinion Gears, Washers, Pinion Shaft and Lock Bolt or Roll Pin
Rear Axlefor GM 7.625" (10 Bolt)1.2" Spline DiameterOpen
View on
Amazon
DANA Fits: 3.2L V6 2023878
🇺🇸 US 🇨🇦 CA
SVLCarrier Gear Kit
Fitment notes — DANA 2023878
SVLCarrier Gear Kit
Rear Axlewith 28 Splineswith GM 7.625 Axlewith Open Differential
View on
Amazon
DANA Fits: 3.2L V6 2023876
🇺🇸 US 🇨🇦 CA
SVLCarrier Gear Kit
Fitment notes — DANA 2023876
SVLCarrier Gear Kit
Rear Axlewith 28 Splineswith Dura Grip Positractionwith GM 7.5 & 7.6 Axles
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 3.2L V6 GM76BI
🇺🇸 US 🇨🇦 CA
Differential Carrier Gear Kit28 Spline
Fitment notes — MOTIVE GEAR GM76BI
Differential Carrier Gear Kit28 SplineOpen Differential Internal KitIncl. Side And Pinion Gears/Washers/Pinion Shaft And Lock Bolt Or Roll Pin
Rear AxleGM 7.625" (10 Bolt)1.2" Spline DiameterOpenIncludes Side and Pinion Gears, Washers, Pinion Shaft and Lock Bolt or Roll Pin
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 ZIKGM7625S28
🇺🇸 US
Differential Carrier Gear KitCast
Fitment notes — USA STANDARD GEAR ZIKGM7625S28
Differential Carrier Gear KitCastReplaces Carriers with 1 Large & 1 Small Window
Rear Axle4WDGM 7.5" and 7.6"28 SplineStandard Open Spider Gear Set
View on
Amazon

This table covers the Differential Spider gears.

Differential Spool

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 3.2L V6 MS7528
🇺🇸 US 🇨🇦 CA
Differential Mini Spool28 Spline
Fitment notes — MOTIVE GEAR MS7528
Differential Mini Spool28 Spline28 Spline
RearGM 7.625" (10 Bolt)Mini SpoolFor Open CarriersFor Carriers with Large Window On One Side and a Small Oval Shape On The Other
View on
Amazon
RICHMOND Fits: 3.2L V6 XL5131
🇺🇸 US 🇨🇦 CA
ExcelDifferential Mini Spool
Fitment notes — RICHMOND XL5131
ExcelDifferential Mini Spool28 Spline
Rearfor GM 7.625" (10 Bolt)Mini SpoolFor Open CarriersFor Carriers with Large Window On One Side and a Small Oval Shape On The Other
View on
Amazon
RICHMOND Fits: 3.2L V6 7876281
🇺🇸 US 🇨🇦 CA
Mini Spool
Fitment notes — RICHMOND 7876281
Mini Spool
RearGM 7.625" (10 Bolt)28 SplineMini SpoolFor Open CarriersFor Carriers with Large Window On One Side and a Small Oval Shape On The Other
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA32229
🇺🇸 US
Rear4WD
Fitment notes — USA STANDARD GEAR USA32229
Rear4WDGM 7.5" and 7.6"28 Spline
View on
Amazon

This table covers the spools that lock the differential side gears together.

Differential Washer

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Popular Fits: 3.2L V6 USA33167
🇺🇸 US
Pinion Gear Washer
Fitment notes — USA STANDARD GEAR USA33167
Pinion Gear Washer
4WDGM 7.5" and 7.6"
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 559291
🇺🇸 US 🇨🇦 CA
Differential Pinion Gear Thrust Washer
Fitment notes — MOTIVE GEAR 559291
Differential Pinion Gear Thrust Washer
RearGM 7.5"/7.625"Pinion Gear Thrust Washer
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 RGB4LW
🇺🇸 US 🇨🇦 CA
GM 7.5" or 7.625"Lock Washer
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA33390
🇺🇸 US
Pinion gear Thrust Washer
Fitment notes — USA STANDARD GEAR USA33390
Pinion gear Thrust Washer
Rear4WDGM 7.5" and 7.6"Standard Open
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA33379
🇺🇸 US
Side gear thrust washer
Fitment notes — USA STANDARD GEAR USA33379
Side gear thrust washer
Rear4WDGM 7.5" and 7.6"Standard Open
View on
Amazon

This table covers the Differential washers.

Drive Shaft

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 3.2L V6 938355
🇺🇸 US 🇨🇦 CA
Length: 25.375"
Fitment notes — DORMAN 938355
Length: 25.375"
Front4WD
View on
Amazon
DORMAN Popular Fits: 3.2L V6 976050
🇺🇸 US 🇨🇦 CA
Length: 44.625"
Fitment notes — DORMAN 976050
Length: 44.625"
Rear4WDAutomatic trans.
View on
Amazon
DORMAN Fits: 3.2L V6 976161
🇺🇸 US 🇨🇦 CA
Length: 52.61"
Fitment notes — DORMAN 976161
Length: 52.61"
Rear4WDManual trans.
View on
Amazon
TRAKMOTIVE Fits: 3.2L V6 HOP100
🇺🇸 US 🇨🇦 CA
Front4WD
Fitment notes — TRAKMOTIVE HOP100
Front4WDManual trans.17-1/2" Length (Center of Joint to Center of Joint)
View on
Amazon
TRAKMOTIVE Fits: 3.2L V6 NIP005
🇺🇸 US 🇨🇦 CA
Front4WD
Fitment notes — TRAKMOTIVE NIP005
Front4WDAutomatic trans.
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WDS38355
🇺🇸 US 🇨🇦 CA
Front4WD
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WDS76050
🇺🇸 US 🇨🇦 CA
Rear4WD
Fitment notes — WJB / INMOTION PARTS WDS76050
Rear4WDAutomatic trans.
View on
Amazon
WJB / INMOTION PARTS Fits: 3.2L V6 WDS76161
🇺🇸 US 🇨🇦 CA
Rear4WD
Fitment notes — WJB / INMOTION PARTS WDS76161
Rear4WDManual trans.
View on
Amazon

This table covers the driveshafts that carry torque from the transmission or transfer case.

Drive Shaft Center Support Bearing

Economy

Brand Part Number Markets Notes Buy
DEA / MARMON RIDE CONTROL Fits: 3.2L V6 A6027
🇺🇸 US 🇨🇦 CA
MRC Driveline
Fitment notes — DEA / MARMON RIDE CONTROL A6027
MRC Driveline
with 1.3780" Bearing I.D.
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 3.2L V6 A6056
🇺🇸 US 🇨🇦 CA
MRC Driveline
Fitment notes — DEA / MARMON RIDE CONTROL A6056
MRC Driveline
with 1.3780" Bearing I.D.Single Dust ShieldBracket without ShoulderAftermarket Design
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 3.2L V6 A60156
🇺🇸 US 🇨🇦 CA
MRC Driveline
Fitment notes — DEA / MARMON RIDE CONTROL A60156
MRC Driveline
with 1.3780" Bearing I.D.Two Dust ShieldsBracket with ShoulderO.E. Design
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ANCHOR Fits: 3.2L V6 6056
🇺🇸 US 🇨🇦 CA
Centerwith 35mm Inside Diameter Bearing(s)
Fitment notes — ANCHOR 6056
Centerwith 35mm Inside Diameter Bearing(s)58mm Centerline of Bearing To Mounting Facewith 168mm Mountingwith Spicer Series 1280, 1310, 1330, 1410
View on
Amazon

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Drive Shaft End Yoke

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 3.2L V6 USA41088
🇺🇸 US
Drive Shaft Pinion Yoke2.556" Snap Ring Span, 1.125" Cap Diameter
Fitment notes — USA STANDARD GEAR USA41088
Drive Shaft Pinion Yoke2.556" Snap Ring Span, 1.125" Cap Diameter
Rear Differential4WDGM 7.5" or 7.6"Pinion YokeFor Use with Mechanics 3R U-Joint1.125" Cap DiameterInside Snap Ring
View on
Amazon
USA STANDARD GEAR Fits: 3.2L V6 USA41090
🇺🇸 US
Drive Shaft Pinion Yoke
Fitment notes — USA STANDARD GEAR USA41090
Drive Shaft Pinion Yoke
Rear Differential4WDGM 7.5 or 7.6" RearPinion Yoke27 SplineFor Use with Mechanic 3R U-Joint1.125" Cap Diameter
View on
Amazon

This table covers the Drive Shaft End yokes.

Drive Shaft Flange Yoke

Brand Part Number Markets Notes Buy
DANA Fits: 3.2L V6 221799
🇺🇸 US 🇨🇦 CA
Spicer
Fitment notes — DANA 221799
Spicer
Manual trans.Rear DriveshaftFor OE#'s 8-97182-188-0
View on
Amazon
DANA Fits: 3.2L V6 221519
🇺🇸 US 🇨🇦 CA
Spicer
Fitment notes — DANA 221519
Spicer
Fits:
RWDAutomatic trans.or 4WDFront Driveshaftor 4WDAutomatic trans.Rear Driveshaft
View on
Amazon

This table covers the Drive Shaft Flange yokes.

Gear Oil

Full Synthetic

Brand Part Number Markets Notes Buy
MOBIL Fits: 3.2L V6 127568
🇺🇸 US
ESP 5W30 1 Quart
View on
Amazon

SAE 75W-90

Brand Part Number Markets Notes Buy
IDEMITSU Fits: 3.2L V6 30305024750
🇺🇸 US
75W90 Racing Gear Oil1 Quart
Fitment notes — IDEMITSU 30305024750
75W90 Racing Gear Oil1 Quart
Fits:
Rear Differential
or:
Front Differential
View on
Amazon
MOBIL Fits: 3.2L V6 104361
🇺🇸 US 🇨🇦 CA
Synthetic Gear Lube Limited Slip 75W-901 Quart
Fitment notes — MOBIL 104361
Synthetic Gear Lube Limited Slip 75W-901 Quart
Fits:
Rear DifferentialLimited Slip Rear Differential
or:
Rear DifferentialStandard Rear Differential
View on
Amazon
Brand Part Number Markets Notes Buy
IDEMITSU Fits: 3.2L V6 30305075750
🇺🇸 US
75W90 Gear Oil1 Quart
Fitment notes — IDEMITSU 30305075750
75W90 Gear Oil1 Quart
Fits:
Rear Differential
or:
Front Differential
View on
Amazon

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.

Gear Oil Additive

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 3.2L V6 USA15018
🇺🇸 US
Friction ModifierPositraction Additive
Fitment notes — USA STANDARD GEAR USA15018
Friction ModifierPositraction Additive4oz.
Positraction Additive, 4 oz.
View on
Amazon

This table covers the Gear Oil additives.

Ring Gear Spacer

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 3.2L V6 075050
🇺🇸 US 🇨🇦 CA
Ring Gear Spacer
Fitment notes — MOTIVE GEAR 075050
Ring Gear Spacer
GM 7.5" or 7.625"Includes Spacer, Bolts, Loctite
View on
Amazon
MOTIVE GEAR Fits: 3.2L V6 075050C
🇺🇸 US 🇨🇦 CA
Rear DifferentialGM 7.5"/7.625"
View on
Amazon

This table covers the Ring Gear spacers.

Shim Driver

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 3.2L V6 USA56077
🇺🇸 US
Carrier Shim Driver Kit
Fitment notes — USA STANDARD GEAR USA56077
Carrier Shim Driver Kit
4WDGM 7.5" and 7.6"
View on
Amazon

This table covers the drivers used to install a shim.

Transfer Case Countershaft Bearing

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS Fits: 3.2L V6 RB6306
🇺🇸 US 🇨🇦 CA
4WDwith Isuzu MUA-TC Transfer Case
Fitment notes — WJB / INMOTION PARTS RB6306
4WDwith Isuzu MUA-TC Transfer Case2 Speed
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
BCA Fits: 3.2L V6 NB306
🇺🇸 US 🇨🇦 CA
Bearing Shape: Round
Fitment notes — BCA NB306
Bearing Shape: Round
with Isuzu MUA-TC Transfer Casewith Part Time 4WDwith 2 Speed Transfer Case
View on
Amazon
NATIONAL Fits: 3.2L V6 306
🇺🇸 US 🇨🇦 CA
4WDwith Isuzu MUA-TC Transfer Case
Fitment notes — NATIONAL 306
4WDwith Isuzu MUA-TC Transfer Case2 Speed
View on
Amazon

This table covers the Transfer Case Countershaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Transfer Case Fluid

Dexron

Brand Part Number Markets Notes Buy
MOBIL Fits: 3.2L V6 123130
🇺🇸 US 🇨🇦 CA
ATF D/M1 Quart
Fitment notes — MOBIL 123130
ATF D/M1 Quart
Transfer Case, with Torque on Demand
View on
Amazon

Full Synthetic

Brand Part Number Markets Notes Buy
MOBIL Popular Fits: 3.2L V6 125195
🇺🇸 US 🇨🇦 CA
Full Synthetic 5W-30Mobil Full Synthetic
Fitment notes — MOBIL 125195
Full Synthetic 5W-30Mobil Full SyntheticSAE 5W-301 Quart
Fits:
Transfer Case, without Torque On Demand (At)
or:
Transfer Case, without Torque On Demand (MT)
View on
Amazon
MOBIL Popular Fits: 3.2L V6 124315
🇺🇸 US 🇨🇦 CA
5W-30Mobil 1 Advanced
Fitment notes — MOBIL 124315
5W-30Mobil 1 AdvancedFull SyntheticSAE 5W-301 Quart
Fits:
Transfer Case, without Torque On Demand (At)
or:
Transfer Case, without Torque On Demand (MT)
View on
Amazon
MOBIL Fits: 3.2L V6 112627
🇺🇸 US 🇨🇦 CA
Extended Performance 5W-30Mobil 1 Extended Performance
Fitment notes — MOBIL 112627
Extended Performance 5W-30Mobil 1 Extended PerformanceFull SyntheticSAE 5W-301 Quart
Fits:
Transfer Case, without Torque On Demand (At)
or:
Transfer Case, without Torque On Demand (MT)
View on
Amazon
MOBIL Fits: 3.2L V6 127568
🇺🇸 US
ESP 5W30 1 Quart
View on
Amazon
MOBIL Fits: 3.2L V6 124595
🇺🇸 US 🇨🇦 CA
Truck & SUV 5W-30Mobil 1 Truck & SUV
Fitment notes — MOBIL 124595
Truck & SUV 5W-30Mobil 1 Truck & SUVFull SyntheticSAE 5W-301 Quart
Fits:
Transfer Case, without Torque On Demand (At)
or:
Transfer Case, without Torque On Demand (MT)
View on
Amazon

Heavy Duty / Diesel

Brand Part Number Markets Notes Buy
MOBIL Fits: 3.2L V6 122492
🇺🇸 US 🇨🇦 CA
Delvac 1300 Super 15W-401 Gallon
Fitment notes — MOBIL 122492
Delvac 1300 Super 15W-401 Gallon
Transfer Case, without Torque On Demand (MT)
View on
Amazon

High Mileage (>75,000 Miles)

Brand Part Number Markets Notes Buy
MOBIL Fits: 3.2L V6 125201
🇺🇸 US 🇨🇦 CA
Full Synthetic High Mileage 5W-301 Quart
Fitment notes — MOBIL 125201
Full Synthetic High Mileage 5W-301 Quart
Fits:
Transfer Case, without Torque On Demand (At)
or:
Transfer Case, without Torque On Demand (MT)
View on
Amazon
MOBIL Fits: 3.2L V6 123842
🇺🇸 US 🇨🇦 CA
Extended Performance High Mileage 5W-30Synthetic
Fitment notes — MOBIL 123842
Extended Performance High Mileage 5W-30Synthetic1 Quart
Fits:
Transfer Case, without Torque On Demand (At)
or:
Transfer Case, without Torque On Demand (MT)
View on
Amazon
MOBIL Fits: 3.2L V6 103767
🇺🇸 US 🇨🇦 CA
High Mileage 5W-30Mobil 1 High Mileage
Fitment notes — MOBIL 103767
High Mileage 5W-30Mobil 1 High MileageFull SyntheticSAE 5W-301 Quart
Fits:
Transfer Case, without Torque On Demand (At)
or:
Transfer Case, without Torque On Demand (MT)
View on
Amazon

Multi-Vehicle

Brand Part Number Markets Notes Buy
MOBIL Fits: 3.2L V6 126505
🇺🇸 US 🇨🇦 CA
Multi-Vehicle ATF
Fitment notes — MOBIL 126505
Multi-Vehicle ATF
Transfer Case, with Torque on Demand
View on
Amazon
MOBIL Fits: 3.2L V6 112980
🇺🇸 US 🇨🇦 CA
Synthetic ATF
Fitment notes — MOBIL 112980
Synthetic ATF
Transfer Case, with Torque on Demand
View on
Amazon

Synthetic Blend

Brand Part Number Markets Notes Buy
MOBIL Popular Fits: 3.2L V6 124407
🇺🇸 US 🇨🇦 CA
Super 5W-30Mobil Super
Fitment notes — MOBIL 124407
Super 5W-30Mobil SuperSynthetic BlendSAE 5W-305 Quart
Fits:
Transfer Case, without Torque On Demand (At)
or:
Transfer Case, without Torque On Demand (MT)
View on
Amazon

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.

Buying Drivetrain Parts for a 2001 Isuzu Rodeo

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Match the engine first. Every drivetrain part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Differential Pinion Bearing / Race and Differential Ring and Pinion .

Frequently Asked Questions

How many drivetrain parts fit the 2001 Isuzu Rodeo?

Our catalog currently lists 257 drivetrain parts for the 2001 Isuzu Rodeo across 41 subcategories and 28 brands, covering both the 2.2L L4 and the 3.2L V6. Each part is matched to the engine(s) it fits.

Do drivetrain parts differ between 2001 Isuzu Rodeo engines?

Yes. Every drivetrain part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of drivetrain problems on a 2001 Isuzu Rodeo?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2001 Isuzu Rodeo was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2001 Isuzu Rodeo?

First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2001 Isuzu Rodeo

Drivetrain Parts for Other Isuzu Rodeo Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.