The 2002 Isuzu NPR has 144 engine parts with verified fitment on this page — 44 part types and 22 brands, covering both the 4.8L L4 DIESEL Turbocharged and the 5.7L V8. Each part includes a manufacturer part number and application notes.
On the 2002 Isuzu NPR, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 59 parts of the 144 listed are Connecting Rod Bearing (35 parts), Crankshaft Main Bearing (15 parts) and Oil Filter (9 parts). The other 41 part types cover the remaining 85 parts.
The 2002 Isuzu NPR was sold with both the 4.8L L4 DIESEL Turbocharged and the 5.7L V8. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
22 brands supply engine parts for the 2002 Isuzu NPR, led by MAHLE / CLEVITE (50 parts), KING ENGINE BEARINGS (18 parts) and DORMAN (17 parts), plus 19 more brands. Quality grades include High Performance, Standard Replacement and Economy.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2002 Isuzu NPR. 17 parts have it, including KING ENGINE BEARINGS CR807SI (Connecting Rod Bearing) and MAHLE / CLEVITE MS909H (Crankshaft Main Bearing). Each part number opens a page with every vehicle that part fits.
Camshaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | SH290S | 🇺🇸 US 🇨🇦 CA | Full Set | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | SH1349S | 🇺🇸 US 🇨🇦 CA | High PerformanceFull Set | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | SH1796S | 🇺🇸 US 🇨🇦 CA | Full Set | View on Amazon |
This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
MAHLE / CLEVITE supplies the 3 Camshaft Bearing parts for the 2002 Isuzu NPR.
This group includes MAHLE / CLEVITE SH290S, MAHLE / CLEVITE SH1349S and MAHLE / CLEVITE SH1796S.
Camshaft Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 5.7L V8 | 555080 | 🇺🇸 US 🇨🇦 CA | Nominal Dia.: 53.46mmMetric Dia. | View on Amazon |
This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
One part is listed for the 2002 Isuzu NPR — DORMAN 555080.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINE PRO Fits: 5.7L V8 | 11663H | 🇺🇸 US 🇨🇦 CA | Performance H SeriesSet | View on Amazon |
| ENGINE PRO Fits: 5.7L V8 | 11663HX | 🇺🇸 US 🇨🇦 CA | High PerformanceExtra Oil Clearance of .001 | View on Amazon |
| ENGINE PRO Fits: 5.7L V8 | 11663HD | 🇺🇸 US 🇨🇦 CA | High Performancewith dowel hole | View on Amazon |
| ENGINE PRO Fits: 5.7L V8 | 11663HC | 🇺🇸 US 🇨🇦 CA | High PerformanceCoated | View on Amazon |
| ENGINE PRO Fits: 5.7L V8 | 11663HXC | 🇺🇸 US 🇨🇦 CA | High PerformanceCoated | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | CR807HPNX | 🇺🇸 US 🇨🇦 CA | BI-Metal [Alecular]Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | CR807HPN | 🇺🇸 US 🇨🇦 CA | BI-Metal [Alecular]Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | CR807HPND | 🇺🇸 US 🇨🇦 CA | BI-Metal [Alecular]Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | CR807HPNDX | 🇺🇸 US 🇨🇦 CA | BI-Metal [Alecular]Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | CR807XPN | 🇺🇸 US 🇨🇦 CA | SetNarrow | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | CR807XPNX | 🇺🇸 US 🇨🇦 CA | SetPmaxblack | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | CR807XPND | 🇺🇸 US 🇨🇦 CA | SetNarrow | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | CR807XPNDX | 🇺🇸 US 🇨🇦 CA | SetPmaxblack | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663HN | 🇺🇸 US 🇨🇦 CA | High PerformanceH Series (Tri-Metal) | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663HND | 🇺🇸 US 🇨🇦 CA | High PerformanceH Series (Tri-Metal) | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663FN | 🇺🇸 US 🇨🇦 CA | High PerformancePair | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663VN | 🇺🇸 US 🇨🇦 CA | High PerformanceNarrowed | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663VXN | 🇺🇸 US 🇨🇦 CA | High Performance.001in Extra Oil Clearance / Narrowed | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663FND | 🇺🇸 US 🇨🇦 CA | High PerformancePair | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663FXN | 🇺🇸 US 🇨🇦 CA | High PerformancePair | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663FXND | 🇺🇸 US 🇨🇦 CA | High PerformancePair | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663HXN | 🇺🇸 US 🇨🇦 CA | High Performance.001in Extra Oil Clearance / Narrowed | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663HXND | 🇺🇸 US 🇨🇦 CA | High Performance.001 in Extra Oil Clearance / Narrowed / Doweled Connecting Rod | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663HNC | 🇺🇸 US 🇨🇦 CA | High PerformanceH Series (Tri-Metal) | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663HXNC | 🇺🇸 US 🇨🇦 CA | High Performance.001in Extra Oil Clearance / Narrowed / Coated | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB663HNDC | 🇺🇸 US 🇨🇦 CA | High PerformanceH Series (Tri-Metal) | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular Fits: 5.7L V8 | CR807SI | 🇺🇸 US 🇨🇦 CA | SetBI-Metal (aluminum silicon base) | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 5.7L V8 | CB663A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 5.7L V8 | CB663P | 🇺🇸 US 🇨🇦 CA | P Series (Tri-Metal)Pair | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 5.7L V8 | CB663A8 | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 5.7L V8 | CB1776A8 | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 5.7L V8 | CB663P8 | 🇺🇸 US 🇨🇦 CA | P Series (Tri-Metal)Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | CR865SI | 🇺🇸 US 🇨🇦 CA | Housing Bore +.002 INSet | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | CR807SIX | 🇺🇸 US 🇨🇦 CA | BI-Metal (aluminum silicon base)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | CB1776A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
35 Connecting Rod Bearing parts are listed for the 2002 Isuzu NPR, from MAHLE / CLEVITE, KING ENGINE BEARINGS and ENGINE PRO. KING ENGINE BEARINGS CR807SI carries the "Popular" badge. High Performance and Standard Replacement are all represented, and High Performance alone accounts for 26 parts.
Connecting Rod Nut
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 5.7L V8 | 635002 | 🇺🇸 US 🇨🇦 CA | Thread Size: 3/8-24Hex: 9/16" | View on Amazon |
This table covers the Connecting Rod nuts.
This group shows a single part: DORMAN 635002.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | CS5746 | 🇺🇸 US 🇨🇦 CA | Timing Cover Gasket, Timing Cover Seal not Included | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2002 Isuzu NPR — MAHLE / CLEVITE CS5746.
Crankshaft Main Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 5.7L V8 | MS909H | 🇺🇸 US 🇨🇦 CA | High PerformanceH Series (Tri-Metal) | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | MB557HP | 🇺🇸 US 🇨🇦 CA | Setalecular | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | MB557HPX | 🇺🇸 US 🇨🇦 CA | Setalecular | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | MB557XPX | 🇺🇸 US 🇨🇦 CA | SetPmaxblack | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | MB557XP | 🇺🇸 US 🇨🇦 CA | SetPmaxblack | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | MB557XPC | 🇺🇸 US 🇨🇦 CA | Setpmaxkote, polymer coated | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | MB557XPCX | 🇺🇸 US 🇨🇦 CA | Setpmaxkote, polymer coated | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | MS909HX | 🇺🇸 US 🇨🇦 CA | High PerformanceH Series (Tri-Metal) | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | MS909HC | 🇺🇸 US 🇨🇦 CA | High PerformanceCoated | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 5.7L V8 | MS909A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 5.7L V8 | MS909P | 🇺🇸 US 🇨🇦 CA | P Series (Tri-Metal)Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 5.7L V8 | MB557SI | 🇺🇸 US 🇨🇦 CA | BI-Metal (aluminum silicon base)Set | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINE PRO Fits: 5.7L V8 | 12909H | 🇺🇸 US 🇨🇦 CA | OE Replacement A SeriesSet | View on Amazon |
| ENGINE PRO Fits: 5.7L V8 | 12909HX | 🇺🇸 US 🇨🇦 CA | Performance H Series +.001 Bearing OversizeSet | View on Amazon |
| ENGINE PRO Fits: 5.7L V8 | 12909HC | 🇺🇸 US 🇨🇦 CA | Performance H Series CoatedSet | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
15 Crankshaft Main Bearing parts for the 2002 Isuzu NPR come from 3 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE and ENGINE PRO. The "Popular" part is MAHLE / CLEVITE MS909H.
The High Performance section lists 9 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. MAHLE / CLEVITE MS909H is listed in this group.
In the Standard Replacement grade, MAHLE / CLEVITE and KING ENGINE BEARINGS supply 3 parts: built to original-equipment specification. A representative part number is MAHLE / CLEVITE MS909A.
3 further parts sit outside the graded sections, with the same engine-level match.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | JV1620 | 🇺🇸 US 🇨🇦 CA | PTFE (Polytetrafluoroethylene) | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: MAHLE / CLEVITE JV1620.
Cylinder Head
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CYLINDER HEAD EXPRESS Fits: 5.7L V8 | CI506B | 🇺🇸 US 🇨🇦 CA | New Bare Cylinder Head Casting - No Valves or Springs | View on Amazon |
This table covers the cylinder heads that close the top of the block.
This group shows a single part: CYLINDER HEAD EXPRESS CI506B.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | GS33285 | 🇺🇸 US 🇨🇦 CA | Cylinder Head Bolt KitSet | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
One part is listed for the 2002 Isuzu NPR — MAHLE / CLEVITE GS33285.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | 5746 | 🇺🇸 US 🇨🇦 CA | Single-Sided Graphite | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2002 Isuzu NPR — MAHLE / CLEVITE 5746.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | HS5746C | 🇺🇸 US 🇨🇦 CA | includes Premium Grade Intake Manifold Gaskets, Plenum Gasket, Valve Stem Seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2002 Isuzu NPR — MAHLE / CLEVITE HS5746C.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINE PRO Fits: 5.7L V8 | 301735 | 🇺🇸 US 🇨🇦 CA | Engine with Plastic Timing Chain Cover | View on Amazon |
| ENGINE PRO Fits: 5.7L V8 | 311003 | 🇺🇸 US 🇨🇦 CA | FEL-Pro CO-Branded Performance Gasket Sets with Permatorque Steel Core Laminate Head Gaskets | View on Amazon |
| ENGINE PRO Fits: 5.7L V8 | 311003MLS | 🇺🇸 US 🇨🇦 CA | FEL-Pro CO-Branded Perfomance Gasket Sets with MLS Head Gaskets | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | 953488 | 🇺🇸 US 🇨🇦 CA | Contains Premium Grade Intake Manifold GasketsFull Gasket Set | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Engine Kit Gasket Set parts are listed for the 2002 Isuzu NPR, from ENGINE PRO and MAHLE / CLEVITE.
Listed part numbers: ENGINE PRO 301735, ENGINE PRO 311003 and ENGINE PRO 311003MLS, plus the other parts above.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Fits: 5.7L V8 | 01807 | 🇺🇸 US 🇨🇦 CA | 1 groove | View on Amazon |
| SBI Fits: 5.7L V8 | 01807S | 🇺🇸 US 🇨🇦 CA | Stellite Face | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
2 Exhaust Valve parts for the 2002 Isuzu NPR come from SBI.
Part numbers include SBI 01807 and SBI 01807S.
Expansion Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 5.7L V8 | 555087 | 🇺🇸 US 🇨🇦 CA | SteelNominal Dia.: 41.5mm | View on Amazon |
| DORMAN Fits: 5.7L V8 | 555030 | 🇺🇸 US 🇨🇦 CA | SteelNominal Dia.: 41.54mm | View on Amazon |
This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
DORMAN supplies both parts for the 2002 Isuzu NPR.
Listed part numbers: DORMAN 555087 and DORMAN 555030.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 5.7L V8 | 594530 | 🇺🇸 US 🇨🇦 CA | Pulley Only | View on Amazon |
| ATP Fits: 5.7L V8 | 102042 | 🇺🇸 US 🇨🇦 CA | SOLID | View on Amazon |
| DORMAN Fits: 5.7L V8 | 594121 | 🇺🇸 US 🇨🇦 CA | SolidDiameter | View on Amazon |
| PIONEER Fits: 5.7L V8 | DA3502 | 🇺🇸 US 🇨🇦 CA | SolidOuter Diameter: 7.99 in | View on Amazon |
| ULTRA-POWER Fits: 5.7L V8 | 594121 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
5 Harmonic Balancer parts are listed for the 2002 Isuzu NPR, from DORMAN, ATP, PIONEER and 1 other brand. DORMAN 594530 carries the "Popular" badge.
Part numbers include DORMAN 594530, ATP 102042 and DORMAN 594121, among others listed above.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 5.7L V8 | MS16167 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 5.7L V8 | MS20136 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber / Steel | View on Amazon |
| DORMAN Fits: 5.7L V8 | 615305 | 🇺🇸 US 🇨🇦 CA | SetIntake Manifold Reseal Kit | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | MS16167P | 🇺🇸 US 🇨🇦 CA | Contains Premium Grade Intake Manifold GasketsMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | MIS16167 | 🇺🇸 US 🇨🇦 CA | Contains Premium Grade Intake Manifold GasketsMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | MIS20136 | 🇺🇸 US 🇨🇦 CA | Master Includes Intake and Valve Cover Gaskets Plus All Miscellaneous Gaskets And SealsMolded Rubber / Steel | View on Amazon |
| SKP Fits: 5.7L V8 | SKT98109 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Intake Manifold Gasket parts are listed for the 2002 Isuzu NPR, from MAHLE / CLEVITE, DORMAN and SKP. MAHLE / CLEVITE MS16167 carries the "Popular" badge.
This group includes MAHLE / CLEVITE MS16167, MAHLE / CLEVITE MS20136 and DORMAN 615305 and the remaining parts above.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | MS14804 | 🇺🇸 US 🇨🇦 CA | Contains Plenum & Throttle Body Gaskets, Contains Fuel Meter Body GasketPlenum Gasket Set | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: MAHLE / CLEVITE MS14804.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Fits: 5.7L V8 | 01931 | 🇺🇸 US 🇨🇦 CA | 1 groove | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
This group shows a single part: SBI 01931.
Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Fits: 5.7L V8 | 797578 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 10W-30 Conventional1 Quart | View on Amazon |
| VALVOLINE Fits: 5.7L V8 | 881156 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 10W-30 ConventionalEasy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 5.7L V8 | 881046 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 10W-30 Conventional5 Gallon Bay Box | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
3 Oil parts for the 2002 Isuzu NPR come from VALVOLINE.
Part numbers include VALVOLINE 797578, VALVOLINE 881156 and VALVOLINE 881046.
Oil Cooler Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | GS33272 | 🇺🇸 US 🇨🇦 CA | KitPaper | View on Amazon |
This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2002 Isuzu NPR — MAHLE / CLEVITE GS33272.
Oil Cooler Line Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 5.7L V8 | 800701 | 🇺🇸 US 🇨🇦 CA | Oil Cooler Line Connector | View on Amazon |
This table covers the harness connectors at the Oil Cooler Line. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
One part is listed for the 2002 Isuzu NPR — DORMAN 800701.
Oil Dipstick / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 5.7L V8 | 917411 | 🇺🇸 US 🇨🇦 CA | Dipstick Only | View on Amazon |
This table covers the Oil Dipstick tubes.
This group shows a single part: DORMAN 917411.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AGS Fits: 5.7L V8 | ODP00009 | 🇺🇸 US 🇨🇦 CA | M12x1.75 | View on Amazon |
| DORMAN Fits: 5.7L V8 | 090034 | 🇺🇸 US 🇨🇦 CA | M12 x 1.75 Thread | View on Amazon |
| DORMAN Fits: 5.7L V8 | 090091 | 🇺🇸 US 🇨🇦 CA | M12 x 1.75 ThreadMagnetic | View on Amazon |
| DORMAN Fits: 5.7L V8 | 092018 | 🇺🇸 US 🇨🇦 CA | Thread Size: M12-1.75Twist Style | View on Amazon |
This table covers the drain plugs in the oil pan.
4 Oil Drain Plug parts for the 2002 Isuzu NPR come from 2 brands — DORMAN and AGS.
This group includes AGS ODP00009, DORMAN 090034 and DORMAN 090091 and the remaining parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 5.7L V8 | 097119 | 🇺🇸 US 🇨🇦 CA | Rubber Gasket | View on Amazon |
| DORMAN Fits: 5.7L V8 | 97119 | 🇺🇸 US 🇨🇦 CA | Rubber GasketRubber | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | B45828 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| ULTRA-POWER Fits: 5.7L V8 | 097119 | 🇺🇸 US 🇨🇦 CA | ID: 0.448"RUBBER GASKET | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Drain Plug Gasket parts are listed for the 2002 Isuzu NPR, from DORMAN, MAHLE / CLEVITE and ULTRA-POWER.
This group includes DORMAN 097119, DORMAN 97119 and MAHLE / CLEVITE B45828 and the remaining parts above.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PUROLATOR Fits: 5.7L V8 | PPL34631 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 5.7L V8 | 51060 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR Fits: 5.7L V8 | PG4631 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 5.7L V8 | PF1218 | 🇺🇸 US 🇨🇦 CA | GM Original EquipmentSpin-On | View on Amazon |
| WIX Popular Fits: 5.7L V8 | 51060 | 🇺🇸 US 🇨🇦 CA | Anti-Drain Back Valve: YESHeight: 5.178 In | View on Amazon |
| FRAM Fits: 5.7L V8 | PH5 | 🇺🇸 US 🇨🇦 CA | Extra GuardSpin-On Oil Filter | View on Amazon |
| HASTINGS / BALDWIN Fits: 5.7L V8 | LF279 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| HASTINGS / BALDWIN Fits: 5.7L V8 | LF224 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| MOTORCRAFT Fits: 5.7L V8 | QFL27 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
9 Oil Filter parts for the 2002 Isuzu NPR come from 8 brands — HASTINGS / BALDWIN, PUROLATOR, ULTRA-POWER and 5 other brands. The "Popular" part is ACDELCO PF1218.
The Economy section lists 3 options from PUROLATOR, ULTRA-POWER and VARIOUS MFR — the catalog's value-priced group. PUROLATOR PPL34631 is listed in this group.
Standard Replacement: 6 parts, from HASTINGS / BALDWIN, ACDELCO, WIX and 2 other brands. A representative part number is ACDELCO PF1218.
This group includes ACDELCO PF1218, PUROLATOR PPL34631 and ULTRA-POWER 51060 and the remaining parts above.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 5.7L V8 | 82560 | 🇺🇸 US 🇨🇦 CA | Oil Adapter and Cooler Gasket Assortment | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
One part is listed for the 2002 Isuzu NPR — DORMAN 82560.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 5.7L V8 | 264132 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 5.7L V8 | SK264132 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
2 Oil Pan parts are listed for the 2002 Isuzu NPR, from DORMAN and SKP.
This group includes DORMAN 264132 and SKP SK264132.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 5.7L V8 | OS34500R | 🇺🇸 US 🇨🇦 CA | Permadry Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | OS32496B | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| SKP Fits: 5.7L V8 | SKOS34500R | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 5.7L V8 | OS34500R | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber Gasket(s) Included | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Pan Gasket parts for the 2002 Isuzu NPR come from 4 brands — FEL-PRO, MAHLE / CLEVITE, SKP and 1 other brand.
Part numbers include FEL-PRO OS34500R, MAHLE / CLEVITE OS32496B and SKP SKOS34500R, among others listed above.
Oil Pump Shaft Guide / Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | H31354 | 🇺🇸 US 🇨🇦 CA | NylonRetainer Material: Plastic | View on Amazon |
This table covers the Oil Pump Shaft Guide retainers.
One part is listed for the 2002 Isuzu NPR — MAHLE / CLEVITE H31354.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | 41616CP | 🇺🇸 US 🇨🇦 CA | PremiumMaterial Carbon Steel / Carbon Steel / Stainless Steel | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | 51616CP | 🇺🇸 US 🇨🇦 CA | SetChrome Facing | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
MAHLE / CLEVITE supplies both parts for the 2002 Isuzu NPR.
The Premium section lists 1 option from MAHLE / CLEVITE — a step above OE specification in materials, tolerances or warranty terms. MAHLE / CLEVITE 41616CP is listed in this group.
The Standard Replacement section: 1 option from MAHLE / CLEVITE. MAHLE / CLEVITE 51616CP is listed in this group.
This group includes MAHLE / CLEVITE 41616CP and MAHLE / CLEVITE 51616CP.
Push Rod
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Fits: 5.7L V8 | 1921485 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust7.195 Length | View on Amazon |
This table covers the pushrods that transfer lifter motion to the rocker arms.
One part is listed for the 2002 Isuzu NPR — SBI 1921485.
Rocker Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Fits: 5.7L V8 | 1801228 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustStamped Steel | View on Amazon |
| SBI Fits: 5.7L V8 | 1811011 | 🇺🇸 US 🇨🇦 CA | Includes Rocker Arm, Smooth Ball, 3/8 Nut | View on Amazon |
This table covers the rocker arms that transfer cam motion to the valves.
2 Rocker Arm parts for the 2002 Isuzu NPR come from SBI.
This group includes SBI 1801228 and SBI 1811011.
Timing Cam Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 5.7L V8 | SP506C | 🇺🇸 US | .405" Wide SprocketsEngines with Roller Camshaft | View on Amazon |
This table covers the Timing Cam sprockets.
This group shows a single part: ENGINETECH SP506C.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 5.7L V8 | C506C | 🇺🇸 US | Engine VIN code R.405" Wide Sprockets | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
One part is listed for the 2002 Isuzu NPR — ENGINETECH C506C.
Timing Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 5.7L V8 | 635505 | 🇺🇸 US 🇨🇦 CA | Material: Plastic | View on Amazon |
This table covers the Timing covers.
One part is listed for the 2002 Isuzu NPR — DORMAN 635505.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | 48382 | 🇺🇸 US 🇨🇦 CA | Fluoroelastomer | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | 67740 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Timing Cover Seal parts for the 2002 Isuzu NPR come from MAHLE / CLEVITE.
Part numbers include MAHLE / CLEVITE 48382 and MAHLE / CLEVITE 67740.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 5.7L V8 | SP506C1 | 🇺🇸 US | .405" Wide SprocketsEngines with Roller Camshaft | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
This group shows a single part: ENGINETECH SP506C1.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 5.7L V8 | VS50088R | 🇺🇸 US 🇨🇦 CA | Permadry Molded Rubber | View on Amazon |
| ENGINETECH Fits: 5.7L V8 | VCC350A2 | 🇺🇸 US | High-temp molded rubber valve cover gasket | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | VS50163 | 🇺🇸 US 🇨🇦 CA | Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 5.7L V8 | VS50161 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| SKP Fits: 5.7L V8 | SKVS50088R | 🇺🇸 US 🇨🇦 CA | Services Both Covers | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Valve Cover Gasket parts for the 2002 Isuzu NPR come from 4 brands — MAHLE / CLEVITE, FEL-PRO, ENGINETECH and 1 other brand. The "Popular" part is FEL-PRO VS50088R.
Part numbers include FEL-PRO VS50088R, ENGINETECH VCC350A2 and MAHLE / CLEVITE VS50163, among others listed above.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Fits: 5.7L V8 | 1409946 | 🇺🇸 US 🇨🇦 CA | Exhaust0.3430 I.D. | View on Amazon |
| SBI Fits: 5.7L V8 | 1409867 | 🇺🇸 US 🇨🇦 CA | Intake0.3440 I.D. | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
2 Valve Guide parts for the 2002 Isuzu NPR come from SBI.
Listed part numbers: SBI 1409946 and SBI 1409867.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 5.7L V8 | LG2281K | 🇺🇸 US | KitContains L2281-16, EG365-4 | View on Amazon |
| SBI Fits: 5.7L V8 | VL115 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.842 Body Diameter | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
2 Valve Lifter parts for the 2002 Isuzu NPR come from 2 brands — ENGINETECH and SBI.
Listed part numbers: ENGINETECH LG2281K and SBI VL115.
Valve Seat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DURA-BOND Popular Fits: 5.7L V8 | 30643 | 🇺🇸 US 🇨🇦 CA | Exhaust1-9/16 O.D., 1-5/16 I.D., 7/32 Depth | View on Amazon |
| SBI Popular Fits: 5.7L V8 | SB15621 | 🇺🇸 US 🇨🇦 CA | High ChromeFor Cast Iron Cylinder Head | View on Amazon |
| DURA-BOND Fits: 5.7L V8 | 30690 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| DURA-BOND Fits: 5.7L V8 | 70643 | 🇺🇸 US 🇨🇦 CA | ExhaustLPG Applications | View on Amazon |
| SBI Fits: 5.7L V8 | SB200036 | 🇺🇸 US 🇨🇦 CA | High ChromeFor Cast Iron Cylinder Head | View on Amazon |
| SBI Fits: 5.7L V8 | SB15621N | 🇺🇸 US 🇨🇦 CA | Non-MagneticStar Series Super Premium Nickel | View on Amazon |
This table covers the Valve seats.
6 Valve Seat parts are listed for the 2002 Isuzu NPR, from DURA-BOND and SBI. DURA-BOND 30643 carries the "Popular" badge.
Listed part numbers: DURA-BOND 30643, SBI SB15621 and DURA-BOND 30690, plus the other parts above.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Fits: 5.7L V8 | 1601266 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust2.040 Length | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
One part is listed for the 2002 Isuzu NPR — SBI 1601266.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Fits: 5.7L V8 | 1211003 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.3770 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
One part is listed for the 2002 Isuzu NPR — SBI 1211003.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.7L V8 | SS45796 | 🇺🇸 US 🇨🇦 CA | Fluoroelastomer | View on Amazon |
| SBI Fits: 5.7L V8 | 1221260 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Valve Stem Seal parts for the 2002 Isuzu NPR come from 2 brands — MAHLE / CLEVITE and SBI.
Part numbers include MAHLE / CLEVITE SS45796 and SBI 1221260.
Buying Engine Parts for a 2002 Isuzu NPR
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Connecting Rod Bearing and Crankshaft Main Bearing .
Frequently Asked Questions
How many engine parts fit the 2002 Isuzu NPR?
Our catalog currently lists 144 engine parts for the 2002 Isuzu NPR across 44 subcategories and 22 brands, covering both the 4.8L L4 DIESEL Turbocharged and the 5.7L V8. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2002 Isuzu NPR engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2002 Isuzu NPR?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2002 Isuzu NPR?
Oil rows on this page include SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2002 Isuzu NPR was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2002 Isuzu NPR?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2002 Isuzu NPR
Engine Parts for Other Isuzu NPR Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.