2002 Isuzu Rodeo Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

269 Engine parts are listed for the 2002 Isuzu Rodeo, in 44 part types, covering both the 2.2L L4 and the 3.2L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2002 Isuzu Rodeo, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Oil (21 parts), Oil Filter (20 parts) and Crankshaft Seal (18 parts). The other 41 part types cover the remaining 210 parts.

Camshaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA Fits: 2.2L L4 NS99139
🇺🇸 US 🇨🇦 CA
View on
Amazon
NATIONAL Fits: 2.2L L4 99139
🇺🇸 US 🇨🇦 CA
View on
Amazon
WJB / INMOTION PARTS Fits: 2.2L L4 WS99139
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the wear sleeves used to restore a Camshaft seal surface.

Camshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 2.2L L4 TCS46094
🇺🇸 US 🇨🇦 CA
Kit
Fitment notes — FEL-PRO TCS46094
Kit
Front
View on
Amazon
SCHAEFFLER Popular Fits: 2.2L L4 SS2412
🇺🇸 US 🇨🇦 CA
DOHC 16 Valve7 MM Width
Fitment notes — SCHAEFFLER SS2412
DOHC 16 Valve7 MM Width35 MM Shaft Diameter
View on
Amazon
SKF Popular Fits: 2.2L L4 13709
🇺🇸 US 🇨🇦 CA
View on
Amazon
AJUSA Fits: 2.2L L4 15012600
🇺🇸 US 🇨🇦 CA
35 x 48 x 7
View on
Amazon
APEX Fits: 2.2L L4 ATC3160
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
AUTO EXTRA Fits: 2.2L L4 13709
🇺🇸 US 🇨🇦 CA
View on
Amazon
BCA Fits: 2.2L L4 NS1108
🇺🇸 US 🇨🇦 CA
View on
Amazon
ELRING Fits: 2.2L L4 702269
🇺🇸 US 🇨🇦 CA
Inner Diameter [MM]: 35Radial Shaft Seal Design: AwithBS
Fitment notes — ELRING 702269
Inner Diameter [MM]: 35Radial Shaft Seal Design: AwithBSSwirl Type: Right-hand TwistFront
View on
Amazon
MAHLE / CLEVITE Fits: 2.2L L4 47950
🇺🇸 US 🇨🇦 CA
Rubber
View on
Amazon
NATIONAL Fits: 2.2L L4 1108
🇺🇸 US 🇨🇦 CA
View on
Amazon
SCHAEFFLER Fits: 2.2L L4 SS2448
🇺🇸 US 🇨🇦 CA
8 MM Width48.14 mm Outside Diameter
Fitment notes — SCHAEFFLER SS2448
8 MM Width48.14 mm Outside Diameter35 MM Shaft Diameter
View on
Amazon
VICTOR REINZ Fits: 2.2L L4 812490910
🇺🇸 US 🇨🇦 CA
Material: Molded Rubber and Metal
Fitment notes — VICTOR REINZ 812490910
Material: Molded Rubber and Metal
Front
View on
Amazon
WJB / INMOTION PARTS Fits: 2.2L L4 WS1108
🇺🇸 US 🇨🇦 CA
Material: Fluoro-Elastomer
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Connecting Rod Bearing

High Performance

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 2.2L L4 CR4017XP
🇺🇸 US 🇨🇦 CA
SetPmaxblack
View on
Amazon
KING ENGINE BEARINGS Fits: 2.2L L4 CR4017XPC
🇺🇸 US 🇨🇦 CA
SetPmaxblack™ Overlay with Pmaxkote™ Coating
Fitment notes — KING ENGINE BEARINGS CR4017XPC
SetPmaxblack™ Overlay with Pmaxkote™ Coating
4mm Oil hole, 12 degrees from center, fits late models
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.2L L4 BB1517
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
ITM ENGINE COMPONENTS Popular Fits: 2.2L L4 4B9391
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
KING ENGINE BEARINGS Fits: 2.2L L4 CR4106AM
🇺🇸 US 🇨🇦 CA
SetBI-Metal (aluminum base)
Fitment notes — KING ENGINE BEARINGS CR4106AM
SetBI-Metal (aluminum base)
2 Oil Holes
View on
Amazon
KING ENGINE BEARINGS Fits: 2.2L L4 CR4017AM
🇺🇸 US 🇨🇦 CA
SetBI-Metal (aluminum base)
Fitment notes — KING ENGINE BEARINGS CR4017AM
SetBI-Metal (aluminum base)
4mm Oil hole, 12 degrees from center, fits late models
View on
Amazon
TOPLINE Fits: 2.2L L4 RBIS16
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
APEX Popular Fits: 2.2L L4 ACS3139
🇺🇸 US 🇨🇦 CA
View on
Amazon
ENGINETECH Popular Fits: 2.2L L4 IS22CSA
🇺🇸 US 🇨🇦 CA
View on
Amazon
AJUSA Fits: 2.2L L4 54078200
🇺🇸 US 🇨🇦 CA
View on
Amazon
ELRING Fits: 2.2L L4 451150
🇺🇸 US 🇨🇦 CA
with Crankshaft Sealwithout Oil Sump Gasket
View on
Amazon
TOPLINE Fits: 2.2L L4 CBSIS16
🇺🇸 US 🇨🇦 CA
View on
Amazon
VICTOR REINZ Fits: 2.2L L4 081122101
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 2.2L L4 BC1517
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — ENGINETECH BC1517
Set
.25 sets have +.20mm flange width.50mm sets have +.40mm flange width
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 5M9391
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
KING ENGINE BEARINGS Fits: 2.2L L4 MB5247AM
🇺🇸 US 🇨🇦 CA
BI-Metal (aluminum base)Set
View on
Amazon
TOPLINE Fits: 2.2L L4 MBIS16
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 2.2L L4 99353
🇺🇸 US 🇨🇦 CA
Rear1.102 IN Width
Fitment notes — NATIONAL 99353
Rear1.102 IN Width4 IN Outside Diameter
View on
Amazon
BCA Fits: 2.2L L4 NS99353
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
SKF Fits: 2.2L L4 99353
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
WJB / INMOTION PARTS Fits: 2.2L L4 WS99353
🇺🇸 US 🇨🇦 CA
Rear4 IN Outside Diameter
View on
Amazon
WJB / INMOTION PARTS Fits: 2.2L L4 WS99123
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 2.2L L4 BS40671
🇺🇸 US 🇨🇦 CA
Rubber
Fitment notes — FEL-PRO BS40671
Rubber
Rear1 Piece
View on
Amazon
FEL-PRO Popular Fits: 2.2L L4 BS40739
🇺🇸 US 🇨🇦 CA
Rubber
Fitment notes — FEL-PRO BS40739
Rubber
Rear1 Piece
View on
Amazon
MAHLE / CLEVITE Popular Fits: 2.2L L4 JV1705
🇺🇸 US 🇨🇦 CA
Fluoroelastomer
Fitment notes — MAHLE / CLEVITE JV1705
Fluoroelastomer
Rear
View on
Amazon
SKF Popular Fits: 2.2L L4 35836
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
ACDELCO Fits: 2.2L L4 710237
🇺🇸 US 🇨🇦 CA
Gold
Fitment notes — ACDELCO 710237
Gold
RearFluoroelastomer Material
View on
Amazon
APEX Fits: 2.2L L4 ATC3162
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
APEX Fits: 2.2L L4 ABS316
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
BCA Fits: 2.2L L4 NS710237
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
ELRING Fits: 2.2L L4 694770
🇺🇸 US 🇨🇦 CA
Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)Outer Diameter [mm]: 104
Fitment notes — ELRING 694770
Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)Outer Diameter [mm]: 104Swirl Type: Left-hand Twist
RearTransmission Side
View on
Amazon
FEL-PRO Fits: 2.2L L4 TCS45128
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 1501939
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
NATIONAL Fits: 2.2L L4 710824
🇺🇸 US 🇨🇦 CA
Front0.433 IN Width
Fitment notes — NATIONAL 710824
Front0.433 IN Width4.098 IN Outside Diameter
View on
Amazon
NATIONAL Fits: 2.2L L4 710237
🇺🇸 US 🇨🇦 CA
Rear0.433 IN Width
Fitment notes — NATIONAL 710237
Rear0.433 IN Width4.098 IN Outside Diameter
View on
Amazon
SCHAEFFLER Fits: 2.2L L4 SS3894
🇺🇸 US 🇨🇦 CA
Rear3.54" I:D X 4.1" O.D. X 0.43" Width
View on
Amazon
TIMKEN Fits: 2.2L L4 710237
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
VICTOR REINZ Fits: 2.2L L4 813822900
🇺🇸 US 🇨🇦 CA
Seal Type: Double Lip
Fitment notes — VICTOR REINZ 813822900
Seal Type: Double Lip
Rear
View on
Amazon
WJB / INMOTION PARTS Fits: 2.2L L4 WS710824
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
WJB / INMOTION PARTS Fits: 2.2L L4 WS710237
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.2L L4 HB180
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
FEL-PRO Popular Fits: 2.2L L4 ES729061
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — FEL-PRO ES729061
Set
Head Bolts with Washers
View on
Amazon
AJUSA Fits: 2.2L L4 81017500
🇺🇸 US 🇨🇦 CA
View on
Amazon
APEX Fits: 2.2L L4 AHB316
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
ELRING Fits: 2.2L L4 803010
🇺🇸 US 🇨🇦 CA
SetBolt Head-/Nut Design: Female Torx
Fitment notes — ELRING 803010
SetBolt Head-/Nut Design: Female TorxThread Size: M11X1,25x105
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 10000100
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
MAHLE / CLEVITE Fits: 2.2L L4 GS33473
🇺🇸 US 🇨🇦 CA
Cylinder Head Bolt KitSet
Fitment notes — MAHLE / CLEVITE GS33473
Cylinder Head Bolt KitSetSteelof 10
View on
Amazon
SKP Fits: 2.2L L4 SKHB180
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
TOPLINE Fits: 2.2L L4 HBIS16
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
VICTOR REINZ Fits: 2.2L L4 143210401
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — VICTOR REINZ 143210401
Set
Head Bolts with Washers
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.2L L4 HIS22A
🇺🇸 US
View on
Amazon
FEL-PRO Popular Fits: 2.2L L4 26317PT
🇺🇸 US 🇨🇦 CA
View on
Amazon
AJUSA Fits: 2.2L L4 10100000
🇺🇸 US 🇨🇦 CA
87.5 Bore Diameter
View on
Amazon
APEX Fits: 2.2L L4 AHG316
🇺🇸 US 🇨🇦 CA
View on
Amazon
ELRING Fits: 2.2L L4 467593
🇺🇸 US 🇨🇦 CA
Diameter [MM]: 87Gasket Design: Fiber Composite
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 0941411
🇺🇸 US 🇨🇦 CA
View on
Amazon
MAHLE / CLEVITE Fits: 2.2L L4 54395A
🇺🇸 US 🇨🇦 CA
Graphite
View on
Amazon
TOPLINE Fits: 2.2L L4 HDGIS16
🇺🇸 US 🇨🇦 CA
View on
Amazon
VICTOR REINZ Fits: 2.2L L4 613300510
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.2L L4 IS22HSA
🇺🇸 US 🇨🇦 CA
View on
Amazon
ENGINETECH Popular Fits: 2.2L L4 IS22HSAWB
🇺🇸 US 🇨🇦 CA
EGR Adapter Gasket Not IncludedIncludes Head Bolts
View on
Amazon
AJUSA Fits: 2.2L L4 52204300
🇺🇸 US 🇨🇦 CA
View on
Amazon
APEX Fits: 2.2L L4 AHS3139
🇺🇸 US 🇨🇦 CA
View on
Amazon
ELRING Fits: 2.2L L4 451190
🇺🇸 US 🇨🇦 CA
with camshaft seal, valve stem seals
View on
Amazon
FEL-PRO Fits: 2.2L L4 HS26317PT1
🇺🇸 US 🇨🇦 CA
Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 0911945
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
TOPLINE Fits: 2.2L L4 HSIS16
🇺🇸 US 🇨🇦 CA
Includes Valve Stem Seals
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Spacer Shim

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 2.2L L4 CHS1050
🇺🇸 US 🇨🇦 CA
0.020 Thick
View on
Amazon
SBI Fits: 2.2L L4 2302151
🇺🇸 US 🇨🇦 CA
New Height 5.315-5.330MIN. Height 5.305
View on
Amazon

This table covers the Cylinder Head Spacer shims.

Engine Block Heater

Brand Part Number Markets Notes Buy
KAT'S HEATERS Fits: 2.2L L4 11435
🇺🇸 US 🇨🇦 CA
Freeze Plug Heater
Fitment notes — KAT'S HEATERS 11435
Freeze Plug Heater
Threaded Electrical Plug End42.5mm400 WattsEasiest Mounting Location: Rear LeftElement Must Face 9 Oclock Position To Avoid Contact with Engine Wall
View on
Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.2L L4 IS22K1
🇺🇸 US 🇨🇦 CA
View on
Amazon
AJUSA Fits: 2.2L L4 50220100
🇺🇸 US 🇨🇦 CA
View on
Amazon
APEX Fits: 2.2L L4 AFS3139
🇺🇸 US 🇨🇦 CA
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 0901945
🇺🇸 US 🇨🇦 CA
View on
Amazon
TOPLINE Fits: 2.2L L4 CGSIS16
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand Part Number Markets Notes Buy
ITM ENGINE COMPONENTS Popular Fits: 2.2L L4 RX9583
🇺🇸 US 🇨🇦 CA
View on
Amazon
MELLING Popular Fits: 2.2L L4 V2040S
🇺🇸 US 🇨🇦 CA
View on
Amazon
ENGINETECH Fits: 2.2L L4 EM4353
🇺🇸 US 🇨🇦 CA
.2340 stem1.142 Head
Fitment notes — ENGINETECH EM4353
.2340 stem1.142 HeadInconel & Stellite
View on
Amazon
QUALCAST Fits: 2.2L L4 102040S
🇺🇸 US 🇨🇦 CA
1.142 Head Dia. Bi-Metallic, Stellite
View on
Amazon
SBI Fits: 2.2L L4 22040S
🇺🇸 US 🇨🇦 CA
Austenitic MaterialStellite Face
View on
Amazon
SBI Fits: 2.2L L4 02040S
🇺🇸 US 🇨🇦 CA
Stellite Face
Fitment notes — SBI 02040S
Stellite Face
Recommended OEM Superalloy
View on
Amazon
SEALED POWER Fits: 2.2L L4 V4632X
🇺🇸 US 🇨🇦 CA
Chrome Plated StemSize
Fitment notes — SEALED POWER V4632X
Chrome Plated StemSize1.1420" Head Diameter.0.2344" Stem DIA.3.6300" O.A.L.29.0070mm Head Diameter.5.9540MM Stem DIA.92.2020mm O.A.L.45 Degree Face Angle (Size: Standard)
View on
Amazon
TOPLINE Fits: 2.2L L4 EVIS16
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Expansion Plug

Brand Part Number Markets Notes Buy
TOPLINE Fits: 2.2L L4 EPSIS16
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 2.2L L4 MS96859
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — FEL-PRO MS96859
Set
Lower
View on
Amazon
VICTOR REINZ Popular Fits: 2.2L L4 713197600
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
AJUSA Fits: 2.2L L4 13118200
🇺🇸 US 🇨🇦 CA
View on
Amazon
APEX Fits: 2.2L L4 AMS3160
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
BECK/ARNLEY Fits: 2.2L L4 0376077
🇺🇸 US 🇨🇦 CA
View on
Amazon
ELRING Fits: 2.2L L4 645910
🇺🇸 US 🇨🇦 CA
Material: Metaloseal (EWP-210)
View on
Amazon
MAHLE / CLEVITE Fits: 2.2L L4 MS19671
🇺🇸 US 🇨🇦 CA
Paper
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.2L L4 IM4352
🇺🇸 US 🇨🇦 CA
.2347 stem1.260 Head
View on
Amazon
MELLING Popular Fits: 2.2L L4 V5784
🇺🇸 US 🇨🇦 CA
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 RV9581
🇺🇸 US 🇨🇦 CA
View on
Amazon
QUALCAST Fits: 2.2L L4 1010784
🇺🇸 US 🇨🇦 CA
1.260 Head Diameter.
View on
Amazon
SBI Fits: 2.2L L4 10784
🇺🇸 US 🇨🇦 CA
View on
Amazon
SEALED POWER Fits: 2.2L L4 V4630
🇺🇸 US 🇨🇦 CA
Chrome Plated StemSize
Fitment notes — SEALED POWER V4630
Chrome Plated StemSize1.2600" Head Diameter.0.2348" Stem DIA.4.0200" O.A.L.45 Degree Face Angle
View on
Amazon
TOPLINE Fits: 2.2L L4 IVIS16
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Motor Mount

Brand Part Number Markets Notes Buy
DEA / MARMON RIDE CONTROL Popular Fits: 2.2L L4 A6870
🇺🇸 US 🇨🇦 CA
Two-bolt mount design
Fitment notes — DEA / MARMON RIDE CONTROL A6870
Two-bolt mount design
Front Left
View on
Amazon
ANCHOR Fits: 2.2L L4 8351
🇺🇸 US 🇨🇦 CA
Front Left
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 2.2L L4 A6884
🇺🇸 US 🇨🇦 CA
Two-bolt mount design
Fitment notes — DEA / MARMON RIDE CONTROL A6884
Two-bolt mount design
Front Right
View on
Amazon
WESTAR Fits: 2.2L L4 EM8351
🇺🇸 US 🇨🇦 CA
Front Left
View on
Amazon
WESTAR Fits: 2.2L L4 EM5812
🇺🇸 US 🇨🇦 CA
Front Right
View on
Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Oil

Summary: Notes list SAE 5W-30, SAE 10W-30 and SAE 15W-40. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include MOBIL, VALVOLINE and IDEMITSU.

Full Synthetic

Brand Part Number Markets Notes Buy
MOBIL Popular Fits: 2.2L L4 125195
🇺🇸 US 🇨🇦 CA
Full Synthetic 5W-30Mobil Full Synthetic
Fitment notes — MOBIL 125195
Full Synthetic 5W-30Mobil Full SyntheticSAE 5W-301 Quart
View on
Amazon
MOBIL Popular Fits: 2.2L L4 124315
🇺🇸 US 🇨🇦 CA
5W-30Mobil 1 Advanced
Fitment notes — MOBIL 124315
5W-30Mobil 1 AdvancedFull SyntheticSAE 5W-301 Quart
View on
Amazon
MOBIL Fits: 2.2L L4 122319
🇺🇸 US 🇨🇦 CA
10W-30Mobil 1 Advanced
Fitment notes — MOBIL 122319
10W-30Mobil 1 AdvancedFull SyntheticSAE 10W-301 Quart
View on
Amazon
MOBIL Fits: 2.2L L4 102990
🇺🇸 US 🇨🇦 CA
Extended Performance 10W-30Mobil 1 Extended Performance
Fitment notes — MOBIL 102990
Extended Performance 10W-30Mobil 1 Extended PerformanceFull SyntheticSAE 10W-301 Quart
View on
Amazon
MOBIL Fits: 2.2L L4 112627
🇺🇸 US 🇨🇦 CA
Extended Performance 5W-30Mobil 1 Extended Performance
Fitment notes — MOBIL 112627
Extended Performance 5W-30Mobil 1 Extended PerformanceFull SyntheticSAE 5W-301 Quart
View on
Amazon
MOBIL Fits: 2.2L L4 124595
🇺🇸 US 🇨🇦 CA
Truck & SUV 5W-30Mobil 1 Truck & SUV
Fitment notes — MOBIL 124595
Truck & SUV 5W-30Mobil 1 Truck & SUVFull SyntheticSAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 2.2L L4 VV955
🇺🇸 US 🇨🇦 CA
Advanced Protection Full Synthetic SAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 2.2L L4 881164
🇺🇸 US 🇨🇦 CA
Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart
View on
Amazon

Heavy Duty / Diesel

Brand Part Number Markets Notes Buy
MOBIL Popular Fits: 2.2L L4 122492
🇺🇸 US 🇨🇦 CA
Delvac 1300 Super 15W-401 Gallon
View on
Amazon

High Mileage (>75,000 Miles)

Brand Part Number Markets Notes Buy
MOBIL Fits: 2.2L L4 125201
🇺🇸 US 🇨🇦 CA
Full Synthetic High Mileage 5W-301 Quart
View on
Amazon
MOBIL Fits: 2.2L L4 123842
🇺🇸 US 🇨🇦 CA
Extended Performance High Mileage 5W-30Synthetic
Fitment notes — MOBIL 123842
Extended Performance High Mileage 5W-30Synthetic1 Quart
View on
Amazon
MOBIL Fits: 2.2L L4 103535
🇺🇸 US 🇨🇦 CA
High Mileage 10W-30Mobil 1 High Mileage
Fitment notes — MOBIL 103535
High Mileage 10W-30Mobil 1 High MileageFull SyntheticSAE 10W-301 Quart
View on
Amazon
MOBIL Fits: 2.2L L4 103767
🇺🇸 US 🇨🇦 CA
High Mileage 5W-30Mobil 1 High Mileage
Fitment notes — MOBIL 103767
High Mileage 5W-30Mobil 1 High MileageFull SyntheticSAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 2.2L L4 VV179
🇺🇸 US 🇨🇦 CA
Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 2.2L L4 881169
🇺🇸 US 🇨🇦 CA
Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart
View on
Amazon

Racing

Brand Part Number Markets Notes Buy
IDEMITSU Fits: 2.2L L4 30018100750
🇺🇸 US
10W30 Rotary Racing Oil1 Quart
View on
Amazon
IDEMITSU Fits: 2.2L L4 30018101750
🇺🇸 US
20W50 Rotary Racing Oil1 Quart
View on
Amazon

Synthetic Blend

Brand Part Number Markets Notes Buy
MOBIL Popular Fits: 2.2L L4 124406
🇺🇸 US 🇨🇦 CA
Super 10W-30Mobil Super
Fitment notes — MOBIL 124406
Super 10W-30Mobil SuperSynthetic BlendSAE 10W-305 Quart
View on
Amazon
MOBIL Popular Fits: 2.2L L4 124407
🇺🇸 US 🇨🇦 CA
Super 5W-30Mobil Super
Fitment notes — MOBIL 124407
Super 5W-30Mobil SuperSynthetic BlendSAE 5W-305 Quart
View on
Amazon
VALVOLINE Fits: 2.2L L4 797975
🇺🇸 US 🇨🇦 CA
Daily Protection SAE 5W-30 Synthetic Blend1 Quart
View on
Amazon
VALVOLINE Fits: 2.2L L4 881159
🇺🇸 US 🇨🇦 CA
Daily Protection SAE 5W-30 Synthetic BlendEasy Pour 5 Quart
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler Mounting Kit

Brand Part Number Markets Notes Buy
HAYDEN Fits: 2.2L L4 238
🇺🇸 US 🇨🇦 CA
Rubber Block Mounting Kit for Heavy Duty Oil Cooler
View on
Amazon
HAYDEN Fits: 2.2L L4 153
🇺🇸 US 🇨🇦 CA
Metal Mounting Bracket Kit for Heavy Duty Oil Cooler
View on
Amazon

This table covers the Oil Cooler Mounting kits.

Oil Drain Plug

Brand Part Number Markets Notes Buy
AGS Fits: 2.2L L4 ODP00007
🇺🇸 US 🇨🇦 CA
M14x1.50
View on
Amazon
DORMAN Fits: 2.2L L4 090154
🇺🇸 US 🇨🇦 CA
StandardThread Size
Fitment notes — DORMAN 090154
StandardThread SizeM14-1.50Under-Head Length: 12.3mmHead Size: 19mmHead Style: Hex
M14 x 1.50 Thread
View on
Amazon
ELRING Fits: 2.2L L4 274410
🇺🇸 US 🇨🇦 CA
with Seal RingBolt Head/Nut Design: Female Torx
View on
Amazon
ENGINETECH Fits: 2.2L L4 DP7703
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.2L L4 21012700
🇺🇸 US 🇨🇦 CA
View on
Amazon
ELRING Fits: 2.2L L4 476750
🇺🇸 US 🇨🇦 CA
Material: FPM (fluoride rubber)Outer Diameter [MM]: 22
Fitment notes — ELRING 476750
Material: FPM (fluoride rubber)Outer Diameter [MM]: 22Shape: O-Ring
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORAD Fits: 2.2L L4 MO161
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filler Cap Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 2.2L L4 458080
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
BOSCH Popular Fits: 2.2L L4 72132WS
🇺🇸 US 🇨🇦 CA
Workshop Oil FilterConnection Size: M18X1.5
View on
Amazon
CHAMP / LUBER-FINER Popular Fits: 2.2L L4 PH47
🇺🇸 US 🇨🇦 CA
Inside Diameter: M18 X 1.5 Thread.Spin-On Filter.
View on
Amazon
FRAM Fits: 2.2L L4 FE3387A
🇺🇸 US 🇨🇦 CA
Spin-OnTough Guard or Synthetic Endurance
View on
Amazon
FVP Fits: 2.2L L4 R1040
🇺🇸 US 🇨🇦 CA
Media Material: Synthetic BlendSpin-On Filter
View on
Amazon
PRO-TEC Fits: 2.2L L4 PXL51040
🇺🇸 US 🇨🇦 CA
Height: 3.45 InThread Size: M18X1.5 In
Fitment notes — PRO-TEC PXL51040
Height: 3.45 InThread Size: M18X1.5 InSpin-On Filter
View on
Amazon
VARIOUS MFR Fits: 2.2L L4 PG111
🇺🇸 US 🇨🇦 CA
Spin-On
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
ACDELCO Fits: 2.2L L4 UPF47R
🇺🇸 US 🇨🇦 CA
Gold / Professional SpecialtyULTRAGUARD
Fitment notes — ACDELCO UPF47R
Gold / Professional SpecialtyULTRAGUARDSpin-On
View on
Amazon
FRAM Fits: 2.2L L4 XG3387A
🇺🇸 US 🇨🇦 CA
ULTRA SyntheticSpin-On Oil Filter
View on
Amazon
MOBIL Fits: 2.2L L4 M1101A
🇺🇸 US 🇨🇦 CA
Extended Performance
View on
Amazon
WIX Fits: 2.2L L4 51040XP
🇺🇸 US 🇨🇦 CA
XP Extreme DutyBest For Synthetic Motor Oils
Fitment notes — WIX 51040XP
XP Extreme DutyBest For Synthetic Motor OilsHeight: 3.45 InSpin-On Filter
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 2.2L L4 PF47E
🇺🇸 US 🇨🇦 CA
GM Original EquipmentGasket Or Seal Included: YES
Fitment notes — ACDELCO PF47E
GM Original EquipmentGasket Or Seal Included: YESSpin-On
View on
Amazon
WIX Popular Fits: 2.2L L4 51040
🇺🇸 US 🇨🇦 CA
Height: 3.45 InMedia Material: Enhanced Cellulose
Fitment notes — WIX 51040
Height: 3.45 InMedia Material: Enhanced CelluloseThread Size: M18X1.5 InSpin-On Filter
View on
Amazon
BECK/ARNLEY Fits: 2.2L L4 0418063
🇺🇸 US 🇨🇦 CA
ST-ST Type
View on
Amazon
BECK/ARNLEY Fits: 2.2L L4 0418173
🇺🇸 US 🇨🇦 CA
View on
Amazon
BOSCH Fits: 2.2L L4 3331
🇺🇸 US 🇨🇦 CA
Premium Oil FilterConnection Size: M18X1.5
Fitment notes — BOSCH 3331
Premium Oil FilterConnection Size: M18X1.5Oil Filter Type: Spin-On/Canister
View on
Amazon
CHAMP / LUBER-FINER Fits: 2.2L L4 PH47XL
🇺🇸 US 🇨🇦 CA
Spin-On Filter.XL Synthetic
View on
Amazon
HASTINGS / BALDWIN Fits: 2.2L L4 LF233
🇺🇸 US 🇨🇦 CA
View on
Amazon
MAHLE / CLEVITE Fits: 2.2L L4 OC90
🇺🇸 US 🇨🇦 CA
Spin-On86.00mm Height
View on
Amazon
MAHLE / CLEVITE Fits: 2.2L L4 OC4053
🇺🇸 US 🇨🇦 CA
Spin-On
Fitment notes — MAHLE / CLEVITE OC4053
Spin-On
LONG LIFE
View on
Amazon
VARIOUS MFR Fits: 2.2L L4 PG111EX
🇺🇸 US 🇨🇦 CA
Extended LifeSpin-On
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 2.2L L4 OS30792R
🇺🇸 US 🇨🇦 CA
Permadry Molded Rubber
Fitment notes — FEL-PRO OS30792R
Permadry Molded Rubber
Lower
View on
Amazon
FEL-PRO Popular Fits: 2.2L L4 OS30794R
🇺🇸 US 🇨🇦 CA
Permadry Molded Rubber
Fitment notes — FEL-PRO OS30794R
Permadry Molded Rubber
Upper
View on
Amazon
AJUSA Fits: 2.2L L4 14065600
🇺🇸 US 🇨🇦 CA
View on
Amazon
APEX Fits: 2.2L L4 AOP316
🇺🇸 US 🇨🇦 CA
Lower
View on
Amazon
APEX Fits: 2.2L L4 AOP316A
🇺🇸 US 🇨🇦 CA
Upper
View on
Amazon
ELRING Fits: 2.2L L4 422701
🇺🇸 US 🇨🇦 CA
View on
Amazon
MAHLE / CLEVITE Fits: 2.2L L4 OS32358
🇺🇸 US 🇨🇦 CA
Molded Rubber
Fitment notes — MAHLE / CLEVITE OS32358
Molded Rubber
Lower
View on
Amazon
MAHLE / CLEVITE Fits: 2.2L L4 OS32359
🇺🇸 US 🇨🇦 CA
Molded Rubber
Fitment notes — MAHLE / CLEVITE OS32359
Molded Rubber
Upper
View on
Amazon
VICTOR REINZ Fits: 2.2L L4 711661300
🇺🇸 US 🇨🇦 CA
Lower
View on
Amazon
VICTOR REINZ Fits: 2.2L L4 713416300
🇺🇸 US 🇨🇦 CA
Upper
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump

Economy

Brand Part Number Markets Notes Buy
SKP Fits: 2.2L L4 SKOEP016A
🇺🇸 US 🇨🇦 CA
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 2.2L L4 EP016A
🇺🇸 US 🇨🇦 CA
View on
Amazon
TOPLINE Fits: 2.2L L4 OPIS16
🇺🇸 US 🇨🇦 CA
Kit
View on
Amazon

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Oil Pump Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 2.2L L4 768555
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Seal

Brand Part Number Markets Notes Buy
SKF Fits: 2.2L L4 12220
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Piston

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 2.2L L4 K47474P
🇺🇸 US
Includes Premium RingsRecessed Head
Fitment notes — ENGINETECH K47474P
Includes Premium RingsRecessed Head
Amigo or RodeoThru 07/00
View on
Amazon
ENGINETECH Fits: 2.2L L4 K48404P
🇺🇸 US
Dome TopIncludes Premium Rings
Fitment notes — ENGINETECH K48404P
Dome TopIncludes Premium Rings
From 08/00
View on
Amazon
ENGINETECH Fits: 2.2L L4 P4840
🇺🇸 US 🇨🇦 CA
Dome Top
Fitment notes — ENGINETECH P4840
Dome Top
From 08/00
View on
Amazon
TOPLINE Fits: 2.2L L4 PAIS16R
🇺🇸 US 🇨🇦 CA
with Rings
View on
Amazon

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.

Piston Ring

Premium

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.2L L4 S86114
🇺🇸 US 🇨🇦 CA
Steel Top PremiumSet
Fitment notes — ENGINETECH S86114
Steel Top PremiumSetMoly Coated
1.2mm / 1.5mm / 2.5mm
View on
Amazon
HASTINGS MANUFACTURING Fits: 2.2L L4 2M4601
🇺🇸 US 🇨🇦 CA
Plasma Moly Top RingTop Ring Surface Treatment: Plasma Moly
Fitment notes — HASTINGS MANUFACTURING 2M4601
Plasma Moly Top RingTop Ring Surface Treatment: Plasma MolyFull Setfor 2 Ring Piston
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING Fits: 2.2L L4 2C4703
🇺🇸 US 🇨🇦 CA
Full SetTop Ring Surface Treatment: Chrome
Fitment notes — HASTINGS MANUFACTURING 2C4703
Full SetTop Ring Surface Treatment: Chromefor 2 Ring PistonTop Groove: 1.20 mm2nd Groove: 1.50 mm1ST Oil Groove: 2.50 mm
Engine. Bore (in.): 3.386
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 0216573
🇺🇸 US 🇨🇦 CA
1.5 X 1.5 X 3mmSet
Fitment notes — ITM ENGINE COMPONENTS 0216573
1.5 X 1.5 X 3mmSet
(Size: Standard)
View on
Amazon
TOPLINE Fits: 2.2L L4 RSIS16R
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Timing Belt

Economy

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 2.2L L4 TB305
🇺🇸 US 🇨🇦 CA
View on
Amazon
FAMOUS BRAND Fits: 2.2L L4 200657253
🇺🇸 US 🇨🇦 CA
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 4370
🇺🇸 US 🇨🇦 CA
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
DAYCO Popular Fits: 2.2L L4 95305
🇺🇸 US 🇨🇦 CA
Camshaft
View on
Amazon
GATES Popular Fits: 2.2L L4 T305
🇺🇸 US 🇨🇦 CA
Power Grip
View on
Amazon
BANDO Fits: 2.2L L4 TB305
🇺🇸 US 🇨🇦 CA
Camshaft
View on
Amazon
CONTINENTAL Fits: 2.2L L4 40305
🇺🇸 US 🇨🇦 CA
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.2L L4 B305
🇺🇸 US 🇨🇦 CA
View on
Amazon
TOPLINE Fits: 2.2L L4 TBIS16
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off.

Timing Belt & Component Kit

Economy

Brand Part Number Markets Notes Buy
FAMOUS BRAND Fits: 2.2L L4 T1175
🇺🇸 US 🇨🇦 CA
Water PumpTiming Belt Should Be Replaced with Water Pump
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GATES Popular Fits: 2.2L L4 TCK305A
🇺🇸 US 🇨🇦 CA
Power Grip
View on
Amazon
GATES Popular Fits: 2.2L L4 TCKWP305A
🇺🇸 US 🇨🇦 CA
Power Gripwith Water Pump
View on
Amazon
DAYCO Fits: 2.2L L4 WP305K2A
🇺🇸 US 🇨🇦 CA
Includes Water Pump, Timing Belt, Camshaft Belt Tensioner, 2 Camshaft Belt Idlers
View on
Amazon
GMB Fits: 2.2L L4 24400305
🇺🇸 US 🇨🇦 CA
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.2L L4 TS26305
🇺🇸 US 🇨🇦 CA
Kit
View on
Amazon
US MOTOR WORKS Fits: 2.2L L4 USTK305A
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Timing Belt & component kits.

Timing Belt Tensioner

Brand Part Number Markets Notes Buy
GMB Popular Fits: 2.2L L4 4303110
🇺🇸 US 🇨🇦 CA
View on
Amazon
ITM ENGINE COMPONENTS Popular Fits: 2.2L L4 60396
🇺🇸 US 🇨🇦 CA
Roller bearing assembly
View on
Amazon
ENGINETECH Fits: 2.2L L4 TT396
🇺🇸 US 🇨🇦 CA
View on
Amazon
FAMOUS BRAND Fits: 2.2L L4 2008270037
🇺🇸 US 🇨🇦 CA
Timing Belt26mm Width Pulley
Fitment notes — FAMOUS BRAND 2008270037
Timing Belt26mm Width PulleyRoller with Bracket
View on
Amazon
GATES Fits: 2.2L L4 T43040
🇺🇸 US 🇨🇦 CA
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.2L L4 T60396
🇺🇸 US 🇨🇦 CA
Bearing
View on
Amazon

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Cover Seal

Brand Part Number Markets Notes Buy
ITM ENGINE COMPONENTS Fits: 2.2L L4 1509300
🇺🇸 US 🇨🇦 CA
CS35x48x7
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 1501938
🇺🇸 US 🇨🇦 CA
TC/Oil Pump
View on
Amazon
MAHLE / CLEVITE Fits: 2.2L L4 67865
🇺🇸 US 🇨🇦 CA
Rubber
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Timing Idler

Brand Part Number Markets Notes Buy
GMB Popular Fits: 2.2L L4 4219540
🇺🇸 US 🇨🇦 CA
View on
Amazon
ITM ENGINE COMPONENTS Popular Fits: 2.2L L4 60397
🇺🇸 US 🇨🇦 CA
View on
Amazon
AUTOTECNICA Fits: 2.2L L4 DA144192
🇺🇸 US 🇨🇦 CA
View on
Amazon
DAYCO Fits: 2.2L L4 84183
🇺🇸 US 🇨🇦 CA
Includes: Camshaft Belt Tensioner, 2 Camshaft Belt Idlers (Hydraulic Actuator Not Included)
View on
Amazon
ENGINETECH Fits: 2.2L L4 TT397
🇺🇸 US 🇨🇦 CA
View on
Amazon
GATES Fits: 2.2L L4 T42084
🇺🇸 US 🇨🇦 CA
Timing Belt PulleyPlastic Smooth/Backside (52.5 mm x 8 mm x 30 mm) - Flanged
View on
Amazon
PREFERRED COMPONENTS INC Fits: 2.2L L4 T60397
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
APEX Popular Fits: 2.2L L4 AVC316
🇺🇸 US 🇨🇦 CA
Includes Grommets & Spark Plug Tube Seals
View on
Amazon
FEL-PRO Popular Fits: 2.2L L4 VS50722R
🇺🇸 US 🇨🇦 CA
Permadry Molded RubberIncludes Valve Cover Grommets
View on
Amazon
AJUSA Fits: 2.2L L4 11063400
🇺🇸 US 🇨🇦 CA
View on
Amazon
BECK/ARNLEY Fits: 2.2L L4 0361655
🇺🇸 US 🇨🇦 CA
View on
Amazon
ELRING Fits: 2.2L L4 495770
🇺🇸 US 🇨🇦 CA
Material: Polyacrylate Rubber (ACM)
View on
Amazon
ELRING Fits: 2.2L L4 058880
🇺🇸 US 🇨🇦 CA
Material: Zinc-Copper brazing alloy (ZN-CU)
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 0931930
🇺🇸 US 🇨🇦 CA
View on
Amazon
MAHLE / CLEVITE Fits: 2.2L L4 VS50353
🇺🇸 US 🇨🇦 CA
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE VS50353
SetMolded RubberIncludes Grommets & Spark Plug Tube Seals
View on
Amazon
VICTOR REINZ Fits: 2.2L L4 153199701
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Grommet

Brand Part Number Markets Notes Buy
ELRING Fits: 2.2L L4 212610
🇺🇸 US 🇨🇦 CA
Material: FPM (Fluoride Rubber)
View on
Amazon

This table covers the Valve Cover grommets.

Valve Guide

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.2L L4 GD3010
🇺🇸 US 🇨🇦 CA
Iron
Fitment notes — ENGINETECH GD3010
Iron
.2362 X .3950 X 1.773Plain ID
View on
Amazon
ENGINETECH Popular Fits: 2.2L L4 GD3011
🇺🇸 US 🇨🇦 CA
Iron
Fitment notes — ENGINETECH GD3011
Iron
Exhaust.2362 X .3950 X 1.378Plain ID
View on
Amazon
SBI Popular Fits: 2.2L L4 1403011
🇺🇸 US 🇨🇦 CA
Exhaust0.2362 I.D.
Fitment notes — SBI 1403011
Exhaust0.2362 I.D.0.3950 O.D.1.378 Length8-P Type
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 VG1248CI
🇺🇸 US 🇨🇦 CA
Cast Iron
Fitment notes — ITM ENGINE COMPONENTS VG1248CI
Cast Iron
Intake
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 VG1249CI
🇺🇸 US 🇨🇦 CA
Cast Iron
Fitment notes — ITM ENGINE COMPONENTS VG1249CI
Cast Iron
Exhaust
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 VG1248BR
🇺🇸 US 🇨🇦 CA
Bronze
Fitment notes — ITM ENGINE COMPONENTS VG1248BR
Bronze
Intake
View on
Amazon
QUALCAST Fits: 2.2L L4 303010
🇺🇸 US 🇨🇦 CA
Intake1.773 OAL.
View on
Amazon
QUALCAST Fits: 2.2L L4 303011
🇺🇸 US 🇨🇦 CA
Exhaust1.378 OAL.
View on
Amazon
SBI Fits: 2.2L L4 1403010
🇺🇸 US 🇨🇦 CA
Intake0.2362 I.D.
Fitment notes — SBI 1403010
Intake0.2362 I.D.0.3950 O.D.1.773 Length8-P Type
View on
Amazon
TOPLINE Fits: 2.2L L4 IVGIS16
🇺🇸 US 🇨🇦 CA
Intake
View on
Amazon
TOPLINE Fits: 2.2L L4 EVGIS16
🇺🇸 US 🇨🇦 CA
Exhaust
View on
Amazon

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.

Valve Lifter

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 2.2L L4 L0571
🇺🇸 US
Hydraulic
Fitment notes — ENGINETECH L0571
Hydraulic
Bucket Type
View on
Amazon
AJUSA Fits: 2.2L L4 85007000
🇺🇸 US 🇨🇦 CA
View on
Amazon
ENGINETECH Fits: 2.2L L4 L2000
🇺🇸 US 🇨🇦 CA
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 0565161
🇺🇸 US 🇨🇦 CA
View on
Amazon
QUALCAST Fits: 2.2L L4 367089
🇺🇸 US 🇨🇦 CA
Hydraulic
View on
Amazon
SBI Fits: 2.2L L4 VL571
🇺🇸 US 🇨🇦 CA
Hydraulic Bucket Type
Fitment notes — SBI VL571
Hydraulic Bucket Type
Intake and Exhaust1.260 Body Diameter1.025 Length
View on
Amazon
TOPLINE Fits: 2.2L L4 LIFIS16
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Seat

Brand Part Number Markets Notes Buy
SBI Fits: 2.2L L4 SB1375E1
🇺🇸 US 🇨🇦 CA
High ChromeFor Cast Iron Cylinder Head
Fitment notes — SBI SB1375E1
High ChromeFor Cast Iron Cylinder Head
Intake1.375 O.D.1.100T I.D.0.2270 DepthNote: Seat May Need To be Machined To Achieve Correct DepthMust Use Adjustable Cutter
View on
Amazon
SBI Fits: 2.2L L4 SB118752
🇺🇸 US 🇨🇦 CA
High ChromeFor Aluminum Cylinder Head
Fitment notes — SBI SB118752
High ChromeFor Aluminum Cylinder Head
Exhaust1-3/16 O.D.0.934T I.D.0.2570 DepthNote: Seat May Need To be Machined To Achieve Correct Depth
View on
Amazon

This table covers the Valve seats.

Valve Spring

Brand Part Number Markets Notes Buy
QUALCAST Fits: 2.2L L4 322488
🇺🇸 US 🇨🇦 CA
1.673 Free Length
View on
Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer Keeper

Brand Part Number Markets Notes Buy
QUALCAST Fits: 2.2L L4 345021
🇺🇸 US 🇨🇦 CA
3 Round Grooves
View on
Amazon
SBI Fits: 2.2L L4 1211098
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2050 Length
Fitment notes — SBI 1211098
Intake and Exhaust0.2050 Length3 Round bead type0.2340 I.D.
View on
Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 2.2L L4 SS711631
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — FEL-PRO SS711631
Set
Intake and Exhaust
View on
Amazon
MAHLE / CLEVITE Popular Fits: 2.2L L4 SS45940A
🇺🇸 US 🇨🇦 CA
Fluoroelastomer
Fitment notes — MAHLE / CLEVITE SS45940A
Fluoroelastomer
Intake and Exhaust
View on
Amazon
AJUSA Fits: 2.2L L4 57023600
🇺🇸 US 🇨🇦 CA
View on
Amazon
APEX Fits: 2.2L L4 AVS3016
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — APEX AVS3016
Set
Intake and Exhaust
View on
Amazon
ITM ENGINE COMPONENTS Fits: 2.2L L4 SS364
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — ITM ENGINE COMPONENTS SS364
Set
Intake and Exhaust
View on
Amazon
QUALCAST Fits: 2.2L L4 38132945
🇺🇸 US 🇨🇦 CA
Viton Metal Clad
View on
Amazon
SBI Fits: 2.2L L4 1221329
🇺🇸 US 🇨🇦 CA
Intake and ExhaustViton Material
Fitment notes — SBI 1221329
Intake and ExhaustViton MaterialPositive TypeMetal Clad Style6 mm Nominal Stem Diameter
View on
Amazon
TOPLINE Fits: 2.2L L4 VSSIS16
🇺🇸 US 🇨🇦 CA
View on
Amazon
ULTRA-POWER Fits: 2.2L L4 SS711631
🇺🇸 US 🇨🇦 CA
SetPremium Valve Stem Seals Included
Fitment notes — ULTRA-POWER SS711631
SetPremium Valve Stem Seals Included16 Pieces
EXHAUSTINTAKE
View on
Amazon
VICTOR REINZ Fits: 2.2L L4 121008601
🇺🇸 US 🇨🇦 CA
SetContains 16 Pieces
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2002 Isuzu Rodeo

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil and Oil Filter .

Frequently Asked Questions

How many engine parts fit the 2002 Isuzu Rodeo?

Our catalog currently lists 269 engine parts for the 2002 Isuzu Rodeo across 44 subcategories and 54 brands, covering both the 2.2L L4 and the 3.2L V6. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2002 Isuzu Rodeo engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2002 Isuzu Rodeo?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2002 Isuzu Rodeo?

Oil rows on this page include SAE 5W-30, SAE 10W-30 and SAE 15W-40. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2002 Isuzu Rodeo was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2002 Isuzu Rodeo?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2002 Isuzu Rodeo

Engine Parts for Other Isuzu Rodeo Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.