2005 Isuzu Ascender Automatic Transmission Parts

This table covers the pistons inside a transmission accumulator. Read more

5 Accumulator Piston parts for the 2005 Isuzu Ascender come from 3 brands — TRANSGO, GM GENUINE and SONNAX. The "Popular" part is TRANSGO 4L6FWD.

Part numbers include TRANSGO 4L6FWD, GM GENUINE 24200127 and GM GENUINE 24221919, among others listed above.

This table covers the Accumulator Piston pins. Read more

GM GENUINE supplies both parts for the 2005 Isuzu Ascender.

Part numbers include GM GENUINE 8684426 and GM GENUINE 8628273.

This table covers the Accumulator Piston Seal sleeves. Read more

2 Accumulator Piston Seal / Sleeve parts for the 2005 Isuzu Ascender come from GM GENUINE.

Part numbers include GM GENUINE 24206508 and GM GENUINE 24206509.

This table covers the Accumulator Piston springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

GM GENUINE supplies both parts for the 2005 Isuzu Ascender.

This group includes GM GENUINE 24219942 and GM GENUINE 24220145.

This table covers the Accumulator springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

3 Accumulator Spring parts for the 2005 Isuzu Ascender come from GM GENUINE.

Part numbers include GM GENUINE 24220146, GM GENUINE 8639074 and GM GENUINE 24208765.

This table covers the Actuator Feed Limit valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2005 Isuzu Ascender — TRANSGO 4L60EAFLOS.

This table covers the apply bands inside the automatic transmission. Read more

6 Band parts for the 2005 Isuzu Ascender come from 6 brands — BORG-WARNER, PA CARGO, ATP and 3 other brands. The "Popular" part is BORG-WARNER 27363BW.

Part numbers include BORG-WARNER 27363BW, PA CARGO 77700A and ATP CX42, among others listed above.

This table covers the Band Anchor pins. Read more

4 Band Anchor Pin parts for the 2005 Isuzu Ascender come from GM GENUINE.

This group includes GM GENUINE 8654581, GM GENUINE 8680500 and GM GENUINE 8680499 and the remaining parts above.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Boost Valve parts for the 2005 Isuzu Ascender come from 2 brands — SONNAX and TRANSGO. The "Popular" part is TRANSGO 4L60EBOOST.

This group includes TRANSGO 4L60EBOOST, SONNAX 700R4LB1 and SONNAX 4L60ELB2 and the remaining parts above.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

6 Bushing parts are listed for the 2005 Isuzu Ascender, from DURA-BOND, ATP and PIONEER. DURA-BOND GMT34 carries the "Popular" badge.

Part numbers include DURA-BOND GMT34, DURA-BOND GMT31A and ATP SB33, among others listed above.

This table covers the Bushing kits. Read more

4 Bushing Kit parts are listed for the 2005 Isuzu Ascender, from DURA-BOND and PA CARGO.

Part numbers include DURA-BOND TK23, DURA-BOND TK23EK and DURA-BOND TK23HP, among others listed above.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2005 Isuzu Ascender — DURA-BOND 2272.

This table covers the Case covers. Read more

2 Case Cover parts for the 2005 Isuzu Ascender come from GM GENUINE.

This group includes GM GENUINE 24261713 and GM GENUINE 24261712.

This table covers the vents on a transmission or axle housing. Read more

3 Case Vent parts for the 2005 Isuzu Ascender come from GM GENUINE.

This group includes GM GENUINE 25892279, GM GENUINE 15743069 and GM GENUINE 24202440.

This table covers the Clutch Apply plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

3 Clutch Apply Plate parts for the 2005 Isuzu Ascender come from 2 brands — GM GENUINE and SONNAX.

Listed part numbers: GM GENUINE 24212462, GM GENUINE 8685044 and SONNAX 7414001K.

This table covers the Clutch Apply rings. Read more

This group shows a single part: GM GENUINE 8685043.

This table covers the Clutch housings. Read more

8 Clutch Housing parts are listed for the 2005 Isuzu Ascender, from GM GENUINE and SONNAX. GM GENUINE 24245624 carries the "Popular" badge.

This group includes GM GENUINE 24245624, SONNAX 7773351K and GM GENUINE 24205298 and the remaining parts above.

This table covers the Clutch Housing Thrust bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2005 Isuzu Ascender — GM GENUINE 8642066.

This table covers the Clutch hubs. Read more

One part is listed for the 2005 Isuzu Ascender — SONNAX 74574HD.

This table covers the pistons that apply a clutch pack. Read more

5 Clutch Pack Piston parts for the 2005 Isuzu Ascender come from GM GENUINE. The "Popular" part is GM GENUINE 24200290.

Part numbers include GM GENUINE 24200290, GM GENUINE 24205273 and GM GENUINE 24205272, among others listed above.

This table covers the seals at the Clutch Pack Piston Dam. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: GM GENUINE 8648987.

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

19 Clutch Plate parts for the 2005 Isuzu Ascender come from 2 brands — GM GENUINE and ACDELCO. The "Popular" part is GM GENUINE 24212459.

In the Backing Plate grade, GM GENUINE supplies 10 parts: grouped under the catalog's "Backing Plate" designation — the notes column spells out what sets them apart. A representative part number is GM GENUINE 24212459.

The Friction section lists 5 options from GM GENUINE and ACDELCO — grouped under the catalog's "Friction" designation — the notes column spells out what sets them apart. ACDELCO 24216946 is listed in this group.

In the Wave Plate grade, GM GENUINE supplies 2 parts: grouped under the catalog's "Wave Plate" designation — the notes column spells out what sets them apart. A representative part number is GM GENUINE 24062825.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

9 Clutch Plate Pack parts are listed for the 2005 Isuzu Ascender, from RAYBESTOS POWERTRAIN and GM GENUINE. GM GENUINE 24238603 carries the "Popular" badge.

In the Friction Plate & Steel Plate Pack grade, GM GENUINE supplies 1 part: grouped under the catalog's "Friction Plate & Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is GM GENUINE 24238603.

The Friction Plate Pack section lists 5 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN RCP96087 is listed in this group.

In the Steel Plate Pack grade, RAYBESTOS POWERTRAIN supplies 3 parts: grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN 000752.

Listed part numbers: GM GENUINE 24238603, RAYBESTOS POWERTRAIN RCP96087 and RAYBESTOS POWERTRAIN RCPBP04, plus the other parts above.

This table covers the Clutch Plate Retaining rings. Read more

One part is listed for the 2005 Isuzu Ascender — GM GENUINE 8663636.

This table covers the Clutch Seal rings. Read more

One part is listed for the 2005 Isuzu Ascender — GM GENUINE 8681292.

This table covers the Clutch springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

5 Clutch Spring parts are listed for the 2005 Isuzu Ascender, from GM GENUINE and TRANSGO. GM GENUINE 24206085 carries the "Popular" badge.

Listed part numbers: GM GENUINE 24206085, GM GENUINE 8642227 and GM GENUINE 24245066, plus the other parts above.

This table covers the Clutch supports. Read more

One part is listed for the 2005 Isuzu Ascender — GM GENUINE 19432695.

This table covers the related components grouped with this assembly. Read more

21 Components parts are listed for the 2005 Isuzu Ascender, from SONNAX, GM GENUINE and TRANSGO. SONNAX 7775421 carries the "Popular" badge.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

This group shows a single part: ROSTRA 550034.

This table covers the Control Solenoid Valve retainers. Read more

One part is listed for the 2005 Isuzu Ascender — GM GENUINE 8680781.

This table covers the Dipstick / Fluid Filler tubes. Read more

One part is listed for the 2005 Isuzu Ascender — GM GENUINE 15913563.

This table covers the seals at the Dipstick / Fluid Filler Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: GM GENUINE 1259475.

This table covers the Extension housings. Read more

One part is listed for the 2005 Isuzu Ascender — GM GENUINE 24241496.

This table covers the Extension Housing bolts. Read more

This group shows a single part: GM GENUINE 08680874.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies both parts for the 2005 Isuzu Ascender.

Listed part numbers: DURA-BOND GMT32 and DURA-BOND GMT32T.

This table covers the gaskets that seal the Extension Housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Extension Housing Gasket parts for the 2005 Isuzu Ascender come from 2 brands — PIONEER and GM GENUINE.

Part numbers include GM GENUINE 24208660, PIONEER 749296 and PIONEER 749295.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Extension Housing Seal parts for the 2005 Isuzu Ascender come from 7 brands — NATIONAL, WJB / INMOTION PARTS, TIMKEN and 4 other brands. The "Popular" part is NATIONAL 4934.

Part numbers include NATIONAL 4934, TIMKEN 9613S and ATP CO36, among others listed above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

25 Filter parts are listed for the 2005 Isuzu Ascender, from ATP, VARIOUS MFR, PIONEER and 8 other brands. ATP TF165 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR, ATP and CHAMP / LUBER-FINER supply 5 parts: the catalog's value-priced group. A representative part number is ATP TF165.

The Standard Replacement section lists 20 options from ATP, PIONEER, FVP and 6 other brands — built to original-equipment specification. FVP T8847 is listed in this group.

This table covers the seals at the Filter. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: GM GENUINE 08685775.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

9 Fluid Cooler Line / Hose parts are listed for the 2005 Isuzu Ascender, from GM GENUINE, SUNSONG and SKP. GM GENUINE 15817501 carries the "Popular" badge.

This group includes GM GENUINE 15817501, SUNSONG 5801243 and GM GENUINE 15817500 and the remaining parts above.

This table covers the harness connectors at the Fluid Cooler Line / Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Fluid Cooler Line / Hose Connector parts for the 2005 Isuzu Ascender come from 3 brands — GM GENUINE, FOUR SEASONS and HAYDEN.

Part numbers include FOUR SEASONS 53024, GM GENUINE 15226661 and GM GENUINE 19125677, among others listed above.

This table covers the Fluid Cooler Line clips. Read more

GM GENUINE supplies both parts for the 2005 Isuzu Ascender.

Part numbers include GM GENUINE 24205103 and GM GENUINE 15068848.

This table covers the pans that hold automatic-transmission fluid. Read more

4 Fluid Pan parts for the 2005 Isuzu Ascender come from 4 brands — DORMAN, GM GENUINE, SKP and 1 other brand.

Listed part numbers: DORMAN 265811, GM GENUINE 24240207 and SKP SK265811, plus the other parts above.

This table covers the Fluid Pan bolts. Read more

One part is listed for the 2005 Isuzu Ascender — GM GENUINE 24231519.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Fluid Pan Gasket parts are listed for the 2005 Isuzu Ascender, from GM GENUINE, MAHLE / CLEVITE, FEL-PRO and 3 other brands. FEL-PRO TOS18663 carries the "Popular" badge.

Listed part numbers: FEL-PRO TOS18663, GM GENUINE 8654799 and ATP SG30, plus the other parts above.

This table covers the Fluid Pan magnets. Read more

This group shows a single part: GM GENUINE 29535617.

This table covers the Fluid pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2005 Isuzu Ascender — GM GENUINE 19434976.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 3 Fluid Pump Bushing parts for the 2005 Isuzu Ascender.

Part numbers include DURA-BOND 61005, DURA-BOND 61005T and DURA-BOND 61005TG.

This table covers the Fluid Pump Cover bolts. Read more

One part is listed for the 2005 Isuzu Ascender — GM GENUINE 24233361.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Fluid Pump Gasket parts for the 2005 Isuzu Ascender come from 3 brands — ATP, GM GENUINE and PIONEER.

Listed part numbers: ATP SG40, GM GENUINE 12337931 and PIONEER 749084.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts for the 2005 Isuzu Ascender come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99174 and WJB / INMOTION PARTS WS99174.

This table covers the Fluid Pump rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness. Read more

GM GENUINE supplies the 4 Fluid Pump Rotor parts for the 2005 Isuzu Ascender.

Part numbers include GM GENUINE 24219539, GM GENUINE 24219542 and GM GENUINE 24219541, among others listed above.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Fluid Pump Seal parts for the 2005 Isuzu Ascender come from 6 brands — GM GENUINE, NATIONAL, WJB / INMOTION PARTS and 3 other brands. The "Popular" part is NATIONAL 4950.

Part numbers include NATIONAL 4950, WJB / INMOTION PARTS WS4950 and ATP CO37, among others listed above.

This table covers the slides inside the transmission fluid pump. Read more

3 Fluid Pump Slide parts for the 2005 Isuzu Ascender come from GM GENUINE.

Listed part numbers: GM GENUINE 24212478, GM GENUINE 24212480 and GM GENUINE 24212479.

This table covers the Fluid screens. Read more

One part is listed for the 2005 Isuzu Ascender — GM GENUINE 8642912.

This table covers the gasket kits for this job. Typical signs include the leaks that sent this assembly to the bench. Confirm the kit matches the opening you are sealing; unused leftover pieces often belong to another configuration. Read more

This group shows a single part: GM GENUINE 19300335.

This table covers the governors and modulators that control transmission shift pressure. Read more

One part is listed for the 2005 Isuzu Ascender — TRANSGO 46MOD.

This table covers the input carriers in the planetary gearset. Read more

One part is listed for the 2005 Isuzu Ascender — SONNAX 77284K.

This table covers the Input shafts. Read more

SONNAX supplies the 3 Input Shaft parts for the 2005 Isuzu Ascender.

Part numbers include SONNAX 7773311S, SONNAX 7773310S and SONNAX 7773312S.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: GM GENUINE 8667035.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts for the 2005 Isuzu Ascender come from 3 brands — GM GENUINE, NATIONAL and WJB / INMOTION PARTS.

This group includes GM GENUINE 8657163, NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.