2006 Isuzu I-350 Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Balance Shaft Bearing parts for the 2006 Isuzu I-350 come from 2 brands — ENGINETECH and MAHLE / CLEVITE.

Listed part numbers: ENGINETECH BS024 and MAHLE / CLEVITE SH2000S.

This table covers the chains that drive the balance shafts. Read more

10 Balance Shaft Chain parts are listed for the 2006 Isuzu I-350, from MELLING, PREFERRED COMPONENTS INC, S.A. GEAR and 4 other brands. CLOYES C728F carries the "Popular" badge.

The Chain Only section lists 7 options from S.A. GEAR, CLOYES, MELLING and 3 other brands — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. CLOYES C728F is listed in this group.

In the Kit grade, ENGINETECH, MELLING and PREFERRED COMPONENTS INC supply 3 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is ENGINETECH TS2110.

This table covers the guides that keep the balance-shaft chain on its path. Read more

4 Balance Shaft Chain Guide parts are listed for the 2006 Isuzu I-350, from INA, MELLING, PREFERRED COMPONENTS INC and 1 other brand.

This group includes INA ZG71028, MELLING BG6007 and PREFERRED COMPONENTS INC R76127 and the remaining parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Balance Shaft Chain Tensioner parts for the 2006 Isuzu I-350 come from 6 brands — MELLING, S.A. GEAR, CLOYES and 3 other brands. The "Popular" part is MELLING BT5511.

Listed part numbers: MELLING BT5511, S.A. GEAR 9511 and CLOYES 95511, plus the other parts above.

This table covers the camshafts that open the valves. Read more

One part is listed for the 2006 Isuzu I-350 — GM GENUINE 24100366.

This table covers the Camshaft bolts. Read more

This group shows a single part: GM GENUINE 12565425.

This table covers the connecting rods between each piston and the crankshaft. Read more

2 Connecting Rod parts are listed for the 2006 Isuzu I-350, from ENGINETECH and GM GENUINE.

This group includes ENGINETECH ECR407 and GM GENUINE 12574879.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts are listed for the 2006 Isuzu I-350, from ENGINETECH, GM GENUINE and SEALED POWER.

This group includes ENGINETECH BB155J, GM GENUINE 89017791 and SEALED POWER 5075A.

This table covers the Connecting Rod bolts. Read more

This group shows a single part: GM GENUINE 12552947.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 2006 Isuzu I-350, from ENGINETECH, FEL-PRO, APEX and 3 other brands. ENGINETECH C211CSA carries the "Popular" badge.

Part numbers include ENGINETECH C211CSA, FEL-PRO CS26335 and APEX ACS3095, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2006 Isuzu I-350 come from 4 brands — GM GENUINE, ENGINETECH, MAHLE / CLEVITE and 1 other brand. The "Popular" part is ENGINETECH BC126J.

Listed part numbers: ENGINETECH BC126J, GM GENUINE 89060394 and GM GENUINE 89065022, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

This group shows a single part: WJB / INMOTION PARTS WS99328.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Crankshaft Seal parts for the 2006 Isuzu I-350 come from 11 brands — GM GENUINE, NATIONAL, TIMKEN and 8 other brands. The "Popular" part is GM GENUINE 89017622.

This table covers the Cylinder Head Alignment Dowel pins. Read more

One part is listed for the 2006 Isuzu I-350 — GM GENUINE 03522352.

This table covers the bolts that clamp the cylinder head to the block. Read more

7 Cylinder Head Bolt parts are listed for the 2006 Isuzu I-350, from GM GENUINE, ENGINETECH, FEL-PRO and 3 other brands. ENGINETECH HB210 carries the "Popular" badge.

This group includes ENGINETECH HB210, FEL-PRO ES71334 and APEX AHB329 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 2006 Isuzu I-350, from ULTRA-POWER, APEX, FEL-PRO and 2 other brands. ULTRA-POWER 26336PT carries the "Popular" badge.

This group includes ULTRA-POWER 26336PT and APEX AHG396 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts are listed for the 2006 Isuzu I-350, from ENGINETECH, FEL-PRO, APEX and 5 other brands. ENGINETECH C211HSA carries the "Popular" badge.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: GM GENUINE 01647544.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 2006 Isuzu I-350 — SBI 2302183.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

One part is listed for the 2006 Isuzu I-350 — MELLING CSL331F.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: GM GENUINE 12586687.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2006 Isuzu I-350 — ENGINETECH C211K1.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts for the 2006 Isuzu I-350 come from 5 brands — ENGINETECH, MAHLE / CLEVITE, QUALCAST and 2 other brands. The "Popular" part is ENGINETECH V4351.

This group includes ENGINETECH V4351, MAHLE / CLEVITE 2114180 and QUALCAST 101999 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts are listed for the 2006 Isuzu I-350, from ATP, DAYCO and ULTRA-POWER.

Listed part numbers: ATP 102376, DAYCO PB1665N and ULTRA-POWER 594444.

This table covers the Harmonic Balancer washers. Read more

One part is listed for the 2006 Isuzu I-350 — GM GENUINE 12578073.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: GM GENUINE 89017742.

This table covers the Intake Manifold bolts. Read more

One part is listed for the 2006 Isuzu I-350 — GM GENUINE 11588352.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2006 Isuzu I-350, from FEL-PRO, APEX, GM GENUINE and 2 other brands. FEL-PRO MS964402 carries the "Popular" badge.

Listed part numbers: FEL-PRO MS964402, APEX AMS3960 and GM GENUINE 89017872, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 2006 Isuzu I-350 come from 3 brands — ENGINETECH, QUALCAST and SBI.

Part numbers include ENGINETECH V4352, QUALCAST 101998 and SBI 01998.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Motor Mount parts for the 2006 Isuzu I-350 come from 5 brands — ANCHOR, DEA / MARMON RIDE CONTROL, GM GENUINE and 2 other brands. The "Popular" part is ANCHOR 3120.

This table covers the Motor Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL AM254.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300013.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

15 Oil parts for the 2006 Isuzu I-350 come from 3 brands — MOBIL, VALVOLINE and IDEMITSU. The "Popular" part is MOBIL 125195.

The Full Synthetic section lists 7 options from MOBIL, VALVOLINE and IDEMITSU — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, MOBIL and VALVOLINE supply 5 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 125201.

The Synthetic Blend section lists 3 options from VALVOLINE and MOBIL — synthetic-blend oils. MOBIL 124407 is listed in this group.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2006 Isuzu I-350 come from GM GENUINE.

Part numbers include GM GENUINE 12590590 and GM GENUINE 12580811.

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2006 Isuzu I-350 — GM GENUINE 24504031.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2006 Isuzu I-350 come from 3 brands — DORMAN, AGS and GM GENUINE. The "Popular" part is DORMAN 090034.

Listed part numbers: DORMAN 090034, AGS ODP00009 and DORMAN 090156, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2006 Isuzu I-350, from FEL-PRO, GM GENUINE and VICTOR REINZ.

Listed part numbers: FEL-PRO 70820, GM GENUINE 03536966 and VICTOR REINZ 711351300.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2006 Isuzu I-350 come from 5 brands — MOTORAD, ACDELCO, CALORSTAT and 2 other brands. The "Popular" part is MOTORAD MO99.

Part numbers include MOTORAD MO99, ACDELCO FC208 and CALORSTAT OC2314, among others listed above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Filler Cap Gasket parts are listed for the 2006 Isuzu I-350, from FEL-PRO and GM GENUINE.

Part numbers include FEL-PRO 73193 and GM GENUINE 24100002.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts for the 2006 Isuzu I-350 come from 14 brands — FRAM, VARIOUS MFR, ACDELCO and 11 other brands. The "Popular" part is CHAMP / LUBER-FINER PH59.

The Economy section lists 7 options from CHAMP / LUBER-FINER, FRAM, FVP and 4 other brands — the catalog's value-priced group. CHAMP / LUBER-FINER PH59 is listed in this group.

The High Performance / Heavy Duty section lists 5 options from FRAM, ACDELCO, MOBIL and 1 other brand — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. ACDELCO UPF61R is listed in this group.

In the Standard Replacement grade, ACDELCO, BOSCH, WIX and 5 other brands supply 8 parts: built to original-equipment specification. A representative part number is ACDELCO PF61E.

This table covers the Oil Filter adapters. Read more

One part is listed for the 2006 Isuzu I-350 — GM GENUINE 24575062.

This table covers the Oil Filter Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: GM GENUINE 25014612.

This table covers the oil pans that hold the engine's oil sump. Read more

One part is listed for the 2006 Isuzu I-350 — DORMAN 264642.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the pickup tubes and screens that feed the oil pump. Read more

One part is listed for the 2006 Isuzu I-350 — MELLING 378S.

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: GM GENUINE 12575550.

This table covers the Oil Pump repair kits. Read more

4 Oil Pump Repair Kit parts are listed for the 2006 Isuzu I-350, from SKP, ENGINETECH, MELLING and 1 other brand.

Economy: 1 part, from SKP. A representative part number is SKP SKOK322.

The Standard Replacement section: 1 option from ENGINETECH. ENGINETECH EK322 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include SKP SKOK322, ENGINETECH EK322 and MELLING K322, among others listed above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

5 Piston parts are listed for the 2006 Isuzu I-350, from ENGINETECH, MAHLE / CLEVITE, SEALED POWER and 1 other brand. ENGINETECH P5012 carries the "Popular" badge.

This group includes ENGINETECH P5012, ENGINETECH P50125 and MAHLE / CLEVITE 2243565WR and the remaining parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

3 Piston Ring parts are listed for the 2006 Isuzu I-350, from ENGINETECH, MAHLE / CLEVITE and SEALED POWER.

This group includes ENGINETECH S93155, MAHLE / CLEVITE 41935CP and SEALED POWER E969K.

This table covers the rocker arms that transfer cam motion to the valves. Read more

7 Rocker Arm parts for the 2006 Isuzu I-350 come from 7 brands — GM GENUINE, MELLING, ENGINETECH and 4 other brands. The "Popular" part is GM GENUINE 24100294.

Part numbers include GM GENUINE 24100294, MELLING MR1323 and ENGINETECH ER2944, among others listed above.

This table covers the Timing Cam sprockets. Read more

6 Timing Cam Sprocket parts for the 2006 Isuzu I-350 come from 6 brands — CLOYES, MELLING, FVP and 3 other brands. The "Popular" part is CLOYES S908.

This group includes CLOYES S908 and MELLING S908A and the remaining parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts are listed for the 2006 Isuzu I-350, from MELLING, CLOYES, INA and 2 other brands. MELLING 195 carries the "Popular" badge.

Part numbers include MELLING 195, CLOYES C195 and INA ZCC195, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

22 Timing Chain & Component Kit parts for the 2006 Isuzu I-350 come from 8 brands — INA, S.A. GEAR, CLOYES and 5 other brands. The "Popular" part is ULTRA-POWER 90195S.

The Economy section: 8 options from S.A. GEAR, ULTRA-POWER, PREFERRED COMPONENTS INC and 1 other brand. ULTRA-POWER 90195S is listed in this group.

Standard Replacement: 14 parts, from INA, CLOYES, MELLING and 1 other brand. A representative part number is CLOYES 90195SX.

This table covers the guides and dampers that keep the timing chain on its path. Read more

16 Timing Chain Guide / Damper parts are listed for the 2006 Isuzu I-350, from MELLING, S.A. GEAR, INA and 3 other brands. MELLING BG5504 carries the "Popular" badge.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts for the 2006 Isuzu I-350 come from 6 brands — MELLING, S.A. GEAR, CLOYES and 3 other brands. The "Popular" part is MELLING BT5512.

Listed part numbers: MELLING BT5512, S.A. GEAR 9512 and CLOYES 95512, plus the other parts above.

This table covers the Timing covers. Read more

3 Timing Cover parts are listed for the 2006 Isuzu I-350, from DORMAN, PIONEER and SKP.

Part numbers include DORMAN 635521, PIONEER 500290 and SKP SK635521.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Timing Cover Gasket parts for the 2006 Isuzu I-350 come from 5 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO TCS45052.

Listed part numbers: FEL-PRO TCS45052, APEX ATC3291 and MAHLE / CLEVITE JV5039, plus the other parts above.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

6 Timing Crank Sprocket parts for the 2006 Isuzu I-350 come from 6 brands — MELLING, S.A. GEAR, CLOYES and 3 other brands. The "Popular" part is MELLING S913.

Part numbers include MELLING S913, among others listed above.

This table covers the Valve covers. Read more

One part is listed for the 2006 Isuzu I-350 — SKP SK12591996.

This table covers the seals at the Valve Cover Bolt. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2006 Isuzu I-350 — GM GENUINE 12615912.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2006 Isuzu I-350 come from 5 brands — FEL-PRO, APEX, GM GENUINE and 2 other brands. The "Popular" part is FEL-PRO VS50703R.

This group includes FEL-PRO VS50703R, APEX AVC396S and GM GENUINE 12591633 and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

3 Valve Guide parts for the 2006 Isuzu I-350 come from 3 brands — ENGINETECH, QUALCAST and SBI.

This group includes ENGINETECH GD8556, QUALCAST 308556 and SBI 1408556.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

6 Valve Lifter parts for the 2006 Isuzu I-350 come from 6 brands — ENGINETECH, MELLING, GM GENUINE and 3 other brands. The "Popular" part is ENGINETECH L2319.

Listed part numbers: ENGINETECH L2319, MELLING JB7524 and GM GENUINE HL129, plus the other parts above.