2000 Jaguar S-Type Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Camshaft Seal parts for the 2000 Jaguar S-Type come from 5 brands — NATIONAL, BCA, ELRING and 2 other brands. The "Popular" part is NATIONAL 471651.

Part numbers include NATIONAL 471651, BCA NS471651 and ELRING 340230, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts are listed for the 2000 Jaguar S-Type, from MAHLE / CLEVITE, SEALED POWER, ENGINETECH and 1 other brand. ENGINETECH BB115J carries the "Popular" badge.

Listed part numbers: ENGINETECH BB115J, MAHLE / CLEVITE CB1772A6 and KING ENGINE BEARINGS CR6751SI, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 2000 Jaguar S-Type, from AJUSA, APEX, FEL-PRO and 1 other brand.

Part numbers include AJUSA 54303100, APEX ACS11026 and FEL-PRO CS262481, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts for the 2000 Jaguar S-Type come from 4 brands — ENGINETECH, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand.

Part numbers include ENGINETECH BC119J, KING ENGINE BEARINGS MB4056SI and MAHLE / CLEVITE MS2207A, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

9 Crankshaft Repair Sleeve parts for the 2000 Jaguar S-Type come from 6 brands — TIMKEN, SCHAEFFLER, BCA and 3 other brands. The "Popular" part is BCA NS88187.

This group includes BCA NS88187, NATIONAL 99187 and SCHAEFFLER SR3506 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

25 Crankshaft Seal parts for the 2000 Jaguar S-Type come from 12 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 9 other brands. The "Popular" part is FEL-PRO BS40620.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 2000 Jaguar S-Type, from ENGINETECH, FEL-PRO, APEX and 3 other brands. ENGINETECH HB278 carries the "Popular" badge.

Listed part numbers: ENGINETECH HB278, FEL-PRO ES72208 and APEX AHB499, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts are listed for the 2000 Jaguar S-Type, from ULTRA-POWER, APEX, FEL-PRO and 2 other brands. ULTRA-POWER 26248PT carries the "Popular" badge.

Listed part numbers: ULTRA-POWER 26248PT, ULTRA-POWER 26249PT and APEX AHG499L, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts are listed for the 2000 Jaguar S-Type, from FEL-PRO, AJUSA, APEX and 3 other brands. APEX AHS4099 carries the "Popular" badge.

This group includes APEX AHS4099, FEL-PRO HS26248PT and AJUSA 52562400 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2000 Jaguar S-Type.

Part numbers include AJUSA 50515900 and AJUSA 50516000.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 2000 Jaguar S-Type come from 3 brands — ENGINETECH, QUALCAST and SBI.

Part numbers include ENGINETECH V4447, QUALCAST 102246 and SBI 02246.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

3 Harmonic Balancer Repair Sleeve parts for the 2000 Jaguar S-Type come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS88187, NATIONAL 88187 and WJB / INMOTION PARTS WS88187.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Intake Manifold Gasket parts are listed for the 2000 Jaguar S-Type, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 2 other brands. FEL-PRO MS96475 carries the "Popular" badge.

This group includes FEL-PRO MS96475, MAHLE / CLEVITE MS19607 and AJUSA 13313200 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts for the 2000 Jaguar S-Type come from 4 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO ES73020.

Listed part numbers: FEL-PRO ES73020, APEX AMS4994 and FEL-PRO MS96484, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 2000 Jaguar S-Type come from 3 brands — ENGINETECH, QUALCAST and SBI.

Listed part numbers: ENGINETECH V4446, QUALCAST 102245 and SBI 02245.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts for the 2000 Jaguar S-Type come from 5 brands — WESTAR, ÜRO PARTS, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is DEA / MARMON RIDE CONTROL A5254.

The Economy section lists 1 option from ÜRO PARTS — the catalog's value-priced group. ÜRO PARTS XR854274 is listed in this group.

In the Standard Replacement grade, WESTAR, DEA / MARMON RIDE CONTROL, ANCHOR and 1 other brand supply 5 parts: built to original-equipment specification. A representative part number is DEA / MARMON RIDE CONTROL A5254.

Listed part numbers: DEA / MARMON RIDE CONTROL A5254, ÜRO PARTS XR854274 and ANCHOR 3077, plus the other parts above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300701.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: VICTOR REINZ 411040700.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

82 Oil parts for the 2000 Jaguar S-Type come from 7 brands — LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. The "Popular" part is LIQUI MOLY 20228. Conventional, Full Synthetic, Heavy Duty / Diesel, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 67 parts.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2000 Jaguar S-Type come from 2 brands — MOTORAD and SKP.

Part numbers include MOTORAD MO119 and SKP SKMO119.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

24 Oil Filter parts for the 2000 Jaguar S-Type come from 17 brands — VAICO, BOSCH, FRAM and 14 other brands. The "Popular" part is K&N PS2009.

The Economy section: 10 options from VAICO, K&N, BOSCH and 5 other brands. K&N PS2009 is listed in this group.

The High Performance / Heavy Duty section lists 1 option from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1209A is listed in this group.

Standard Replacement: 13 parts, from ACDELCO, HENGST, BOSCH and 8 other brands. A representative part number is ACDELCO PFL400A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts for the 2000 Jaguar S-Type come from 6 brands — APEX, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is APEX AOP451.

Listed part numbers: APEX AOP451, FEL-PRO OS30697R and AJUSA 14064600, plus the other parts above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

5 Piston parts are listed for the 2000 Jaguar S-Type, from SILV-O-LITE, ENGINETECH, MAHLE / CLEVITE and 1 other brand. ENGINETECH P5002 carries the "Popular" badge.

This group includes ENGINETECH P5002, MAHLE / CLEVITE 2243428 and SEALED POWER H881CP and the remaining parts above.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts for the 2000 Jaguar S-Type come from 2 brands — MAHLE / CLEVITE and SEALED POWER.

This group includes MAHLE / CLEVITE 2233651 and SEALED POWER 4399YA.

This table covers the rings that seal each piston to the cylinder wall. Read more

4 Piston Ring parts are listed for the 2000 Jaguar S-Type, from HASTINGS MANUFACTURING, ENGINETECH and MAHLE / CLEVITE.

The Premium section lists 2 options from ENGINETECH and MAHLE / CLEVITE — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH S89186 is listed in this group.

The Standard Replacement section: 2 options from HASTINGS MANUFACTURING. HASTINGS MANUFACTURING 2C5077S is listed in this group.

Listed part numbers: ENGINETECH S89186, MAHLE / CLEVITE 42095CP and HASTINGS MANUFACTURING 2C5077S, plus the other parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts are listed for the 2000 Jaguar S-Type, from INA and S.A. GEAR.

Listed part numbers: INA ZCC708F and S.A. GEAR C708F.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts for the 2000 Jaguar S-Type come from 2 brands — S.A. GEAR and INA.

The Economy section: 1 option from S.A. GEAR. S.A. GEAR 76172 is listed in this group.

Standard Replacement: 1 part, from INA. A representative part number is INA ZC90708S.

Part numbers include S.A. GEAR 76172 and INA ZC90708S.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts are listed for the 2000 Jaguar S-Type, from S.A. GEAR and INA. S.A. GEAR 9413 carries the "Popular" badge.

Listed part numbers: S.A. GEAR 9413, INA ZG95551 and INA ZG95552, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts for the 2000 Jaguar S-Type come from 2 brands — INA and S.A. GEAR.

This group includes INA ZT95549 and S.A. GEAR 9414.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV5070.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts for the 2000 Jaguar S-Type come from 3 brands — INA, PREFERRED COMPONENTS INC and S.A. GEAR.

This group includes INA ZSS929, PREFERRED COMPONENTS INC G55833 and S.A. GEAR S883.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2000 Jaguar S-Type come from 5 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO VS50610R.

Part numbers include FEL-PRO VS50610R, APEX AVC499S and MAHLE / CLEVITE VS50396, among others listed above.