2011 Jaguar XJ Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2011 Jaguar XJ — AJUSA 54281300.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts for the 2011 Jaguar XJ come from 4 brands — ELRING, MAHLE / CLEVITE, AJUSA and 1 other brand. The "Popular" part is ELRING 925800.

This group includes ELRING 925800, ELRING 948040 and AJUSA 15104700 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts are listed for the 2011 Jaguar XJ, from ELRING and MAHLE / CLEVITE.

This group includes ELRING 966170 and MAHLE / CLEVITE GS34045.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 2011 Jaguar XJ, from AJUSA, APEX, ELRING and 1 other brand. AJUSA 10213900 carries the "Popular" badge.

Part numbers include AJUSA 10213900, AJUSA 10213800 and APEX AHG988L, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2011 Jaguar XJ — AJUSA 52558400.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2011 Jaguar XJ come from KAT'S HEATERS.

This group includes KAT'S HEATERS 11463 and KAT'S HEATERS 28500.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2011 Jaguar XJ — AJUSA 50511700.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Intake Manifold Gasket parts are listed for the 2011 Jaguar XJ, from ELRING, AJUSA, MAHLE / CLEVITE and 2 other brands. FEL-PRO MS97530 carries the "Popular" badge.

Listed part numbers: FEL-PRO MS97530, ÜRO PARTS LR010881 and AJUSA 13269900, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 01482000.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Motor Mount parts for the 2011 Jaguar XJ come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

This group includes ANCHOR 10389 and DEA / MARMON RIDE CONTROL A70220.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

6 Oil parts for the 2011 Jaguar XJ come from VALVOLINE. The "Popular" part is VALVOLINE VV927.

The Full Synthetic section lists 3 options from VALVOLINE — full-synthetic oils. VALVOLINE VV927 is listed in this group.

In the High Mileage (>75,000 Miles) grade, VALVOLINE supplies 3 parts: oils grouped for high-mileage engines. A representative part number is VALVOLINE 849644.

This group includes VALVOLINE VV927, VALVOLINE 881147 and VALVOLINE 881655 and the remaining parts above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts for the 2011 Jaguar XJ come from 2 brands — SKP and ÜRO PARTS.

Part numbers include SKP SK90944 and ÜRO PARTS LR010754.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2011 Jaguar XJ — ELRING 925960.

This table covers the Oil Cooler Hose pipes. Read more

This group shows a single part: REIN CHU1020.

This table covers the Oil Cooler lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

This group shows a single part: ÜRO PARTS LR028136PRM.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2011 Jaguar XJ come from 4 brands — DORMAN, AGS, ELRING and 1 other brand. The "Popular" part is AGS ODP00007.

Listed part numbers: AGS ODP00007, DORMAN 090053 and DORMAN 090115, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 2011 Jaguar XJ, from AJUSA and ELRING.

Part numbers include AJUSA 01115300 and ELRING 176090.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2011 Jaguar XJ come from 3 brands — CALORSTAT, MOTORAD and SKP.

Listed part numbers: CALORSTAT OC2325, MOTORAD MO119 and SKP SKMO119.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2011 Jaguar XJ come from 16 brands — WIX, ACDELCO, CHAMP / LUBER-FINER and 13 other brands. The "Popular" part is ACDELCO PF659.

The Economy section lists 5 options from CHAMP / LUBER-FINER, FVP, PRO-TEC and 2 other brands — the catalog's value-priced group. CHAMP / LUBER-FINER P986 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1C353A is listed in this group.

In the Standard Replacement grade, ACDELCO, MANN, VARIOUS MFR and 7 other brands supply 11 parts: built to original-equipment specification. A representative part number is ACDELCO PF659.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2011 Jaguar XJ — MAHLE / CLEVITE B33731.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 887370.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: WELLS 5S12476.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: ELRING 351210.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies both parts for the 2011 Jaguar XJ.

This group includes HASTINGS MANUFACTURING 2C4147 and HASTINGS MANUFACTURING 2C4147S.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2011 Jaguar XJ — INA ZC0345.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

This group shows a single part: S.A. GEAR 76406.

This table covers the guides and dampers that keep the timing chain on its path. Read more

One part is listed for the 2011 Jaguar XJ — ÜRO PARTS C2Z28430.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: ÜRO PARTS LR095472.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

18 Valve Cover Gasket parts for the 2011 Jaguar XJ come from 7 brands — ELRING, MAHLE / CLEVITE, AJUSA and 4 other brands. The "Popular" part is AJUSA 56057300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 2011 Jaguar XJ come from 2 brands — AJUSA and ELRING.

Listed part numbers: AJUSA 57074600, AJUSA 12036300 and ELRING 907530.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: WELLS 2T1298.