2017 Jaguar Xe Automatic Transmission Parts

This table covers the Bushing kits. Read more

2 Bushing Kit parts for the 2017 Jaguar Xe come from 2 brands — DURA-BOND and PA CARGO. Every part fits all 3 engine options (2.0L L4 DIESEL Turbocharged, 2.0L L4 Turbocharged and 3.0L V6 Supercharged).

Listed part numbers: DURA-BOND TK33 and PA CARGO K181901.

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

PA CARGO supplies the 8 Clutch Plate parts for the 2017 Jaguar Xe. PA CARGO 181114 carries the "Popular" badge. All of them fit every engine offered in the 2017 Xe.

Part numbers include PA CARGO 181114, PA CARGO 181102 and PA CARGO 181112, among others listed above.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

8 Clutch Plate Pack parts for the 2017 Jaguar Xe come from RAYBESTOS POWERTRAIN. The "Popular" part is RAYBESTOS POWERTRAIN RGPZ018.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 5 parts: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN RGPZ018.

The Steel Plate Pack section lists 3 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN STMZF18 is listed in this group.

Listed part numbers: RAYBESTOS POWERTRAIN RGPZ018, RAYBESTOS POWERTRAIN RGPZ278 and RAYBESTOS POWERTRAIN RHT96283, plus the other parts above.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Extension Housing Seal parts are listed for the 2017 Jaguar Xe, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2017 Xe.

Part numbers include NATIONAL 710486, NATIONAL 710487 and WJB / INMOTION PARTS WS710486, among others listed above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

5 Filter parts for the 2017 Jaguar Xe come from 3 brands — RAYBESTOS POWERTRAIN, DORMAN and BECK/ARNLEY. 2 parts fit every engine; the other 3 are engine-specific.

The Economy section lists 1 option from DORMAN — the catalog's value-priced group. DORMAN 265853F is listed in this group.

In the Standard Replacement grade, RAYBESTOS POWERTRAIN and BECK/ARNLEY supply 4 parts: built to original-equipment specification. A representative part number is BECK/ARNLEY 0440409.

This group includes DORMAN 265853F, BECK/ARNLEY 0440409 and RAYBESTOS POWERTRAIN 515768 and the remaining parts above.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

2 Fluid Cooler parts for the 2017 Jaguar Xe come from 2 brands — MAHLE / CLEVITE and NISSENS. Every part fits all 3 engine options (2.0L L4 DIESEL Turbocharged, 2.0L L4 Turbocharged and 3.0L V6 Supercharged).

Part numbers include MAHLE / CLEVITE CLC160000S and NISSENS 91116.

This table covers the pans that hold automatic-transmission fluid. Read more

6 Fluid Pan parts are listed for the 2017 Jaguar Xe, from DORMAN, SKP, ELRING and 3 other brands. DORMAN 265853 carries the "Popular" badge. All of them fit every engine offered in the 2017 Xe.

This group includes DORMAN 265853, SKP SK265853 and ELRING 224210 and the remaining parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pan Gasket parts for the 2017 Jaguar Xe come from 2 brands — ELRING and PA CARGO. Every part fits all 3 engine options (2.0L L4 DIESEL Turbocharged, 2.0L L4 Turbocharged and 3.0L V6 Supercharged).

Part numbers include ELRING 186400 and PA CARGO 181500.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 2017 Jaguar Xe, from NATIONAL, PA CARGO and WJB / INMOTION PARTS. All of them fit every engine offered in the 2017 Xe.

Part numbers include NATIONAL 710939, PA CARGO 181151 and WJB / INMOTION PARTS WS710939.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2017 Jaguar Xe — ELRING 096490.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 2017 Jaguar Xe, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2017 Xe.

This group includes NATIONAL 710780 and WJB / INMOTION PARTS WS710780.

This table covers the O-rings and seals at this joint. Read more

One part is listed for the 2017 Jaguar Xe — ELRING 821470.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Output Shaft Seal parts for the 2017 Jaguar Xe come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits all 3 engine options (2.0L L4 DIESEL Turbocharged, 2.0L L4 Turbocharged and 3.0L V6 Supercharged).

Listed part numbers: NATIONAL 710671 and WJB / INMOTION PARTS WS710671.

This table covers the Piston kits. Read more

One part is listed for the 2017 Jaguar Xe — PA CARGO K18190099.

This table covers the rebuild kits for this assembly. Read more

4 Rebuild Kit parts are listed for the 2017 Jaguar Xe, from PA CARGO and TRANSTEC. All of them fit every engine offered in the 2017 Xe.

In the Banner Kit (Overhaul Kit + Friction Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK18100S.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK18100 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, PA CARGO and TRANSTEC supply 2 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO K181900.

Listed part numbers: PA CARGO DK18100S, PA CARGO DK18100 and PA CARGO K181900, plus the other parts above.

This table covers the Shift Improvement kits. Read more

This group shows a single part: SONNAX ZF8ZIP.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 3 Sun Gear Bushing parts for the 2017 Jaguar Xe. All of them fit every engine offered in the 2017 Xe.

Part numbers include DURA-BOND ZFT21BR, DURA-BOND ZFT22 and DURA-BOND ZFT22BR.

This table covers the seals at the Torque Converter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: PA CARGO 181150.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

13 Transmission Fluid parts for the 2017 Jaguar Xe come from 6 brands — VALVOLINE, LIQUI MOLY, PENTOSIN and 3 other brands. The "Popular" part is MOBIL 126505. 10 parts fit every engine; the other 3 are engine-specific.

The Multi-Vehicle section lists 8 options from VALVOLINE, LIQUI MOLY, MOBIL and 1 other brand — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The ZF Fluid section lists 4 options from PENTOSIN and ZF — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. PENTOSIN 1058110 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

6 Transmission Fluid Additive parts for the 2017 Jaguar Xe come from LUBEGARD. The "Popular" part is LUBEGARD 19610. Every part fits all 3 engine options (2.0L L4 DIESEL Turbocharged, 2.0L L4 Turbocharged and 3.0L V6 Supercharged).

This group includes LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts are listed for the 2017 Jaguar Xe, from DEA / MARMON RIDE CONTROL and ÜRO PARTS. 1 part fits every engine; the other 4 are engine-specific.

Economy: 1 part, from ÜRO PARTS. A representative part number is ÜRO PARTS T4N1434.

The Standard Replacement section: 4 options from DEA / MARMON RIDE CONTROL. DEA / MARMON RIDE CONTROL A70206 is listed in this group.

This group includes ÜRO PARTS T4N1434, DEA / MARMON RIDE CONTROL A70206 and DEA / MARMON RIDE CONTROL A70210 and the remaining parts above.