19 Ignition parts are listed for the 2020 Jaguar Xe, in 4 part types, covering the 2.0L L4 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2020 Jaguar Xe, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Ignition Coil (6 parts), Crankshaft Position Sensor (5 parts) and Spark Plug (5 parts). The other 1 part type covers the remaining 3 parts.
The 2020 Jaguar Xe came with a single engine, the 2.0L L4 Turbocharged, and every part is verified against it.
11 brands supply ignition parts for the 2020 Jaguar Xe, led by HOLSTEIN (3 parts), WALKER PRODUCTS (3 parts) and STANDARD MOTOR PRODUCTS (2 parts), plus 8 more brands. Quality grades include Standard Replacement, Economy and Premium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2020 Jaguar Xe. 4 parts have it, including ASTEMO / HITACHI CPS0082 (Crankshaft Position Sensor) and DELPHI GN11104 (Ignition Coil). Each part number opens a page with every vehicle that part fits.
Camshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN | 2CAM0649 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | PC1126 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS | 2352271 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sensor OnlyConnector Shape: Rectangle, Oval | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
3 Camshaft Position Sensor parts for the 2020 Jaguar Xe come from 3 brands — HOLSTEIN, STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.
The Economy section lists 1 option from HOLSTEIN — the catalog's value-priced group. HOLSTEIN 2CAM0649 is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS and WALKER PRODUCTS supply 2 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS PC1126.
Listed part numbers: HOLSTEIN 2CAM0649, STANDARD MOTOR PRODUCTS PC1126 and WALKER PRODUCTS 2352271.
Crankshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN | 2CRK0827 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ASTEMO / HITACHI Popular | CPS0082 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS | 2352288 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sensor OnlyMounting Hole Quantity: 1 | View on Amazon |
| WELLS | 5S16182 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | From Chassis # LCP58835 | View on Amazon |
| WELLS | 5S15206 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | To Chassis # LCP58834 | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
5 Crankshaft Position Sensor parts for the 2020 Jaguar Xe come from 4 brands — WELLS, HOLSTEIN, ASTEMO / HITACHI and 1 other brand. The "Popular" part is ASTEMO / HITACHI CPS0082.
The Economy section: 1 option from HOLSTEIN. HOLSTEIN 2CRK0827 is listed in this group.
Standard Replacement: 4 parts, from WELLS, ASTEMO / HITACHI and WALKER PRODUCTS. A representative part number is ASTEMO / HITACHI CPS0082.
This group includes ASTEMO / HITACHI CPS0082, HOLSTEIN 2CRK0827 and WALKER PRODUCTS 2352288 and the remaining parts above.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER | UF862 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DELPHI Popular | GN11104 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KARLYN / BREMI / STI Popular | 5224 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bremi-STI Direct Ignition Coil Unit | View on Amazon |
| STANDARD MOTOR PRODUCTS | UF862 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS | 9212385 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Single Coil | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN | 2IGC0618 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
6 Ignition Coil parts for the 2020 Jaguar Xe come from 6 brands — ULTRA-POWER, DELPHI, KARLYN / BREMI / STI and 3 other brands. The "Popular" part is DELPHI GN11104.
The Economy section: 1 option from ULTRA-POWER. ULTRA-POWER UF862 is listed in this group.
In the Premium grade, DELPHI supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is DELPHI GN11104.
Standard Replacement: 3 parts, from KARLYN / BREMI / STI, STANDARD MOTOR PRODUCTS and WALKER PRODUCTS. A representative part number is KARLYN / BREMI / STI 5224.
1 further part sits outside the graded sections, with the same engine-level match.
Listed part numbers: DELPHI GN11104, ULTRA-POWER UF862 and KARLYN / BREMI / STI 5224, plus the other parts above.
Spark Plug
Summary: Notes include pre-set gaps of 0.027" and 0.032". Replacement brands in this table include BOSCH, NGK and DENSO.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Popular | 8502 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EVOPre-Set Gap: 0.027" | View on Amazon |
| BOSCH | 96373 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Fine Wire Double Iridium | View on Amazon |
| DENSO | 3502 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Iridium Long LifePre-Set Gap: 0.032" | View on Amazon |
| NGK | 93710 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Laser Iridium High Ignitability | View on Amazon |
| NGK | SILZKAR8G7Y | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Laser Iridium High Ignitability | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
5 Spark Plug parts are listed for the 2020 Jaguar Xe, from BOSCH, NGK and DENSO. BOSCH 8502 carries the "Popular" badge.
Part numbers include BOSCH 8502, BOSCH 96373 and DENSO 3502, among others listed above.
Buying Ignition Parts for a 2020 Jaguar Xe
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 2.0L L4 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Crankshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2020 Jaguar Xe?
Our catalog currently lists 19 ignition parts for the 2020 Jaguar Xe across 4 subcategories and 11 brands, covering the 2.0L L4 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2020 Jaguar Xe?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 2020 Jaguar Xe?
Notes on this page include pre-set gaps of 0.027" and 0.032". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 Jaguar Xe was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 Jaguar Xe?
Every part on this page is matched to the 2.0L L4 Turbocharged engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 Jaguar Xe
Ignition Parts for Other Jaguar Xe Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.