2005 Jeep Wrangler Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 352 engine parts for the 2005 Jeep Wrangler, across 71 part types, covering both the 2.4L L4 and the 4.0L L6. Every part shows its brand, manufacturer part number and fitment notes.

On the 2005 Jeep Wrangler, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Oil (48 parts), Oil Filter (18 parts) and Crankshaft Seal (14 parts). The other 68 part types cover the remaining 272 parts.

Camshaft

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 ES242
🇺🇸 US 🇲🇽 MX
CAM nose has keyway
View on
Amazon
MELLING Fits: 4.0L L6 MC1377
🇺🇸 US 🇲🇽 MX
View on
Amazon

This table covers the camshafts that open the valves.

Camshaft & Lifter Kit

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 ECK242
🇺🇸 US
Cam and Lifter KitKit Contains ES242(1) and L2011-16(1)
Fitment notes — ENGINETECH ECK242
Cam and Lifter KitKit Contains ES242(1) and L2011-16(1)
CAM nose has keyway
View on
Amazon
MELLING Fits: 4.0L L6 CLMC1377
🇺🇸 US 🇲🇽 MX
View on
Amazon

This table covers the Camshaft & Lifter kits.

Camshaft Bearing

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 CC480
🇺🇸 US
Full Set
View on
Amazon
DURA-BOND Fits: 4.0L L6 N10
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard
View on
Amazon
ENGINETECH Fits: 4.0L L6 CC480P
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 SH1980S
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Full Set
View on
Amazon
SEALED POWER Fits: 4.0L L6 1921M
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Camshaft Hardware Kit

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 HK113
🇺🇸 US
View on
Amazon

This table covers the Camshaft hardware kits.

Camshaft Plug

Brand Part Number Markets Notes Buy
DORMAN Fits: 4.0L L6 555076
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Nominal Dia.: 2-9/64"SCMetric Dia.
Fitment notes — DORMAN 555076
Nominal Dia.: 2-9/64"SCMetric Dia.54.26mmSteelHeight: 0.350"Open End Dia.: 2.143"
2.141 In. Steel Shallow Cup
View on
Amazon

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Camshaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA Fits: 4.0L L6 NS99139
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the wear sleeves used to restore a Camshaft seal surface.

Camshaft Retainer / Thrust Plate

Brand Part Number Markets Notes Buy
MELLING Fits: 4.0L L6 MG550
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Connecting Rod

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 ECR108
🇺🇸 US 🇲🇽 MX
Reconditioned
Fitment notes — ENGINETECH ECR108
Reconditioned
Press Fit pins661grForging # 544, 641, 691
View on
Amazon

This table covers the connecting rods between each piston and the crankshaft.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 BB612J
🇺🇸 US
Set
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 CB960A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
A Series (Aluminum)Pair
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 CB960P
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
P Series (Tri-Metal)Pair
Fitment notes — MAHLE / CLEVITE CB960P
P Series (Tri-Metal)Pair
(Size: 0.001" Undersize)
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 CB960A6
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
A Series (Aluminum)Set
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 J242CSB
🇺🇸 US 🇲🇽 MX
View on
Amazon
FEL-PRO Popular Fits: 4.0L L6 CS81694
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Permadry 1 - Piece Molded Rubber Oil Pan Gasket(s) Included
View on
Amazon
AJUSA Fits: 4.0L L6 54082900
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Engine 242
Fitment notes — AJUSA 54082900
Fits:
Engine 242
or:
Engine ERH
View on
Amazon
APEX Fits: 4.0L L6 ACS2071
🇺🇸 US 🇲🇽 MX
View on
Amazon
ELRING Fits: 4.0L L6 651560
🇺🇸 US 🇲🇽 MX
with Crankshaft Seal
Fitment notes — ELRING 651560
with Crankshaft Seal
RubiconBody code: TJ
View on
Amazon
ENGINE PRO Fits: 4.0L L6 3781694
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 CS5713A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 081012301
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 BC468J
🇺🇸 US
Set
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 MS1947A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
A Series (Aluminum)Set
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 MS1947P
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
P Series (Tri-Metal)Set
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
NATIONAL Fits: 4.0L L6 99179
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon
SCHAEFFLER Fits: 4.0L L6 SR3500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front20.32 mm Width
Fitment notes — SCHAEFFLER SR3500
Front20.32 mm Widthwith Flange53.98 mm Outside Diameter
View on
Amazon
TIMKEN Fits: 4.0L L6 KWK99179
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Kwik-Sleeve
Fitment notes — TIMKEN KWK99179
Kwik-Sleeve
Front
View on
Amazon
WJB / INMOTION PARTS Fits: 4.0L L6 WS99179
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 4.0L L6 BS40183
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rubber
Fitment notes — FEL-PRO BS40183
Rubber
RearTwo Piece
View on
Amazon
NATIONAL Popular Fits: 4.0L L6 321460
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon
TIMKEN Popular Fits: 4.0L L6 321460
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Material: S-Nitrile
Fitment notes — TIMKEN 321460
Material: S-Nitrile
Front
View on
Amazon
APEX Fits: 4.0L L6 ABS271
🇺🇸 US 🇲🇽 MX
Rear
View on
Amazon
BCA Fits: 4.0L L6 NS321460
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon
ELRING Fits: 4.0L L6 110800
🇺🇸 US 🇲🇽 MX
Transmission SideRubicon
Fitment notes — ELRING 110800
Transmission SideRubiconBody code: TJ
View on
Amazon
ELRING Fits: 4.0L L6 095560
🇺🇸 US 🇲🇽 MX
Transmission SideRubicon
Fitment notes — ELRING 095560
Transmission SideRubiconBody code: TJ
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 JV1658
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — MAHLE / CLEVITE JV1658
Set
Rear
View on
Amazon
MOPAR Fits: 4.0L L6 5018594AB
🇺🇸 US
Fits 103.4" wheelbaseAutomatic trans.
Fitment notes — MOPAR 5018594AB
Fits:
103.4" wheelbaseAutomatic trans.UnlimitedUnlimited Rubicon4 speed trans.Trans. code 42RLEREAR MAIN
or:
93.4" wheelbaseAutomatic trans.RubiconSportX Model4 speed trans.Trans. code 42RLEREAR MAIN
View on
Amazon
NATIONAL Fits: 4.0L L6 5174
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearSplit Type
View on
Amazon
SCHAEFFLER Fits: 4.0L L6 SS2839
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front9.525 mm Width
Fitment notes — SCHAEFFLER SS2839
Front9.525 mm Width57.378 mm Outside Diameter45.237 mm Inside Diameter
View on
Amazon
TIMKEN Fits: 4.0L L6 5174
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 191008101
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — VICTOR REINZ 191008101
Set
RearRubberTwo Piece2 Piece
View on
Amazon
WJB / INMOTION PARTS Fits: 4.0L L6 WS321460
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head

Brand Part Number Markets Notes Buy
CYLINDER HEAD EXPRESS Fits: 4.0L L6 CH4003N
🇺🇸 US 🇲🇽 MX
New Cylinder Head with New Valves and Springs4 Coil Pack Mounting Bosses
Fitment notes — CYLINDER HEAD EXPRESS CH4003N
New Cylinder Head with New Valves and Springs4 Coil Pack Mounting Bosses
Casting # 0331
View on
Amazon
CYLINDER HEAD EXPRESS Fits: 4.0L L6 CH4003NB
🇺🇸 US 🇲🇽 MX
New Bare Cylinder Head Casting - No Valves or Springs
Fitment notes — CYLINDER HEAD EXPRESS CH4003NB
New Bare Cylinder Head Casting - No Valves or Springs
Casting # 03314 Coil Pack Mounting Bosses
View on
Amazon
ENGINETECH Fits: 4.0L L6 CH1083R
🇺🇸 US
RemanufacturedIncludes Valves and Spring
Fitment notes — ENGINETECH CH1083R
RemanufacturedIncludes Valves and Spring
Casting # O331Sold Individually
View on
Amazon
ENGINETECH Fits: 4.0L L6 EHJ2421
🇺🇸 US 🇲🇽 MX
Bare (without valves or springs)
Fitment notes — ENGINETECH EHJ2421
Bare (without valves or springs)
56cc Chamber.3135 guide IDValve Head Diameter 1.910 / 1.500Sold Individually
View on
Amazon
ITM ENGINE COMPONENTS Fits: 4.0L L6 605008
🇺🇸 US 🇲🇽 MX
Bare HeadDoes not include Valves, Cam, or Springs
Fitment notes — ITM ENGINE COMPONENTS 605008
Bare HeadDoes not include Valves, Cam, or Springs
Casting # 331
View on
Amazon

This table covers the cylinder heads that close the top of the block.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 HB201
🇺🇸 US 🇲🇽 MX
Set
View on
Amazon
FEL-PRO Popular Fits: 4.0L L6 ES71102
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
View on
Amazon
APEX Fits: 4.0L L6 AHB271
🇺🇸 US 🇲🇽 MX
Set
View on
Amazon
ARP Fits: 4.0L L6 1463601
🇺🇸 US 🇨🇦 CA
Set
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 GS33414
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Cylinder Head Bolt KitSet
Fitment notes — MAHLE / CLEVITE GS33414
Cylinder Head Bolt KitSetSteel
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 141008301
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 4.0L L6 26211PT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Perma TorqueMLS
View on
Amazon
MAHLE / CLEVITE Popular Fits: 4.0L L6 54249
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi-Layered Steel
View on
Amazon
AJUSA Fits: 4.0L L6 10108700
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10108700
Multi Layered Steel
Fits:
101.5 Bore DiameterEngine 242
or:
101.5 Bore DiameterEngine ERH
View on
Amazon
APEX Fits: 4.0L L6 AHG288
🇺🇸 US 🇲🇽 MX
View on
Amazon
ELRING Fits: 4.0L L6 651590
🇺🇸 US 🇲🇽 MX
RubiconBody code: TJ
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 611064600
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Embossed Steel
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 4.0L L6 HS26211PT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Permadry Molded Rubber Valve Cover Gasket(s), Permatorquemls Head Gasket, Valve Stem Seals
View on
Amazon
MAHLE / CLEVITE Popular Fits: 4.0L L6 HS5713A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Valve Stem Seals
View on
Amazon
AJUSA Fits: 4.0L L6 52147500
🇨🇦 CA
Engine ERH
View on
Amazon
AJUSA Fits: 4.0L L6 52241100
🇺🇸 US 🇲🇽 MX
Engine 242
View on
Amazon
APEX Fits: 4.0L L6 AHS2088
🇺🇸 US 🇲🇽 MX
View on
Amazon
ENGINE PRO Fits: 4.0L L6 3626211PT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ENGINETECH Fits: 4.0L L6 J242HSB
🇺🇸 US 🇲🇽 MX
Includes Multi-Layer Steel Head Gasket
View on
Amazon
ENGINETECH Fits: 4.0L L6 J242HSBWB
🇺🇸 US
Includes Multi-Layer Steel Head Gasket, Head Bolts
View on
Amazon
FEL-PRO Fits: 4.0L L6 HS26211PTVK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals, Permatorquemls Head Gasket
Fitment notes — FEL-PRO HS26211PTVK
Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals, Permatorquemls Head Gasket
Head bolt replacement recommended
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 021062001
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Valve Stem Seals not Included
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Plug

Brand Part Number Markets Notes Buy
DORMAN Fits: 4.0L L6 565069
🇺🇸 US 🇨🇦 CA
Nominal Dia.: 2"SCMetric Dia.
Fitment notes — DORMAN 565069
Nominal Dia.: 2"SCMetric Dia.50.92mmBrassHeight: 0.420"Open End Dia.: 2.012"
50.92mm Brass Shallow CupX ModelUnlimited RubiconUnlimitedRubicon
View on
Amazon

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Cylinder Head Spacer Shim

Brand Part Number Markets Notes Buy
SBI Fits: 4.0L L6 2302121
🇺🇸 US 🇨🇦 CA
Fits RubiconX Model
Fitment notes — SBI 2302121
Fits:
RubiconX ModelNew Height 3.465
or:
SportUnlimited RubiconNew Height 3.465
View on
Amazon

This table covers the Cylinder Head Spacer shims.

Cylinder Repair Sleeve

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 ESL181
🇺🇸 US
View on
Amazon
MELLING Fits: 4.0L L6 CSL133
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
3/32 IN Wall Thickness
View on
Amazon
MELLING Fits: 4.0L L6 CSL233
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
1/8 IN Wall Thickness
View on
Amazon

This table covers the wear sleeves used to restore a Cylinder seal surface.

Engine Block Heater

Brand Part Number Markets Notes Buy
KAT'S HEATERS Fits: 4.0L L6 11611
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Freeze Plug Heater
Fitment notes — KAT'S HEATERS 11611
Freeze Plug Heater
Easiest Mounting Location: Rear LeftElement Must Face 6 Oclock Position To Avoid Contact with Engine WallThreaded Electrical Plug End51mm600 Watts
View on
Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 4.0L L6 2602005
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Perma Dry Molded Rubber Oil Pan Gasket(s) & Valve Cover Gasket(s) Included
View on
Amazon
AJUSA Fits: 4.0L L6 50259500
🇺🇸 US 🇲🇽 MX
Engine 242
View on
Amazon
AJUSA Fits: 4.0L L6 50160400
🇨🇦 CA
Engine ERH
View on
Amazon
ENGINETECH Fits: 4.0L L6 J242K4
🇺🇸 US 🇲🇽 MX
Multi-Layer Steel Head Gasket
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 953568
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Full Gasket Set
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Rebuild Kit

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 RCJ242FP
🇺🇸 US
Recon KitPremium
Fitment notes — ENGINETECH RCJ242FP
Recon KitPremium
Camshaft nose has Keyway
ENGINETECH BB612J [Connecting Rod Bearing] Set
Choose Size: 0.020" Undersize0.030" Undersize Standard 0.020" Undersize0.030" Undersize StandardIntentionally blank Intentionally blank Choose
ENGINETECH BC468J [Crankshaft Main Bearing] Set
Choose Size: 0.010" Undersize0.020" Undersize 0.010" Undersize0.020" Undersize Intentionally blank Intentionally blank Choose
ENGINETECH S38816 [Piston Ring] PremiumSetMoly Coated
Choose Size: 0.020" Oversize0.030" Oversize0.040" Oversize0.060" Oversize Standard 0.020" Oversize0.030" Oversize0.040" Oversize0.060" Oversize StandardIntentionally blank Intentionally blank Choose
ENGINETECH P3071 [Piston] shaped Recessed HeadHypereutectic Coated skirt
Choose Size: 0.030" Oversize0.040" Oversize Standard 0.030" Oversize0.040" Oversize StandardIntentionally blank Intentionally blank Choose
View on
Amazon
ENGINETECH Fits: 4.0L L6 MKJ242GP
🇺🇸 US
Master Rebuild KitPremium
Fitment notes — ENGINETECH MKJ242GP
Master Rebuild KitPremium
ENGINETECH BB612J [Connecting Rod Bearing] Set
Choose Size: 0.020" Undersize0.030" Undersize Standard 0.020" Undersize0.030" Undersize StandardIntentionally blank Intentionally blank Choose
ENGINETECH BC468J [Crankshaft Main Bearing] Set
Choose Size: 0.010" Undersize0.020" Undersize 0.010" Undersize0.020" Undersize Intentionally blank Intentionally blank Choose
ENGINETECH S38816 [Piston Ring] PremiumSetMoly Coated
Choose Size: 0.020" Oversize0.030" Oversize0.040" Oversize0.060" Oversize Standard 0.020" Oversize0.030" Oversize0.040" Oversize0.060" Oversize StandardIntentionally blank Intentionally blank Choose
ENGINETECH P3071 [Piston] shaped Recessed HeadHypereutectic Coated skirt
Choose Size: 0.030" Oversize0.040" Oversize Standard 0.030" Oversize0.040" Oversize StandardIntentionally blank Intentionally blank Choose
View on
Amazon

This table covers the Engine rebuild kits.

Exhaust Valve

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 4.0L L6 V1917
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ENGINETECH Fits: 4.0L L6 V4341
🇺🇸 US 🇲🇽 MX
.3114 stem1.500 Head
Fitment notes — ENGINETECH V4341
.3114 stem1.500 HeadThree Groove
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 2114096
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
1.500 IN Head Diameter0.311 IN Stem Diameter
Fitment notes — MAHLE / CLEVITE 2114096
1.500 IN Head Diameter0.311 IN Stem Diameter3 Lock Groove Valve
View on
Amazon
QUALCAST Fits: 4.0L L6 101917
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
1.500 Head Diameter. 3 Groove.
View on
Amazon
SBI Fits: 4.0L L6 01917
🇺🇸 US
SportUnlimited Rubicon
Fitment notes — SBI 01917
SportUnlimited RubiconX Model3 Groove
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Expansion Plug

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 PK256
🇺🇸 US
Steel
View on
Amazon
MELLING Popular Fits: 4.0L L6 MPE256BR
🇺🇸 US 🇲🇽 MX
Brass
View on
Amazon
DORMAN Fits: 4.0L L6 555069
🇺🇸 US 🇲🇽 MX
Nominal Dia.: 50.92mmMetric Dia.
Fitment notes — DORMAN 555069
Nominal Dia.: 50.92mmMetric Dia.50.92mmSteelHeight: 0.420"Open End Dia.: 2.015"
Fits:
2 In.or 2"
View on
Amazon
DORMAN Fits: 4.0L L6 565069
🇺🇸 US 🇨🇦 CA
Nominal Dia.: 2"SCMetric Dia.
Fitment notes — DORMAN 565069
Nominal Dia.: 2"SCMetric Dia.50.92mmBrassHeight: 0.420"Open End Dia.: 2.012"
50.92mm Brass Shallow CupX ModelUnlimited RubiconUnlimitedRubicon
View on
Amazon
ENGINETECH Fits: 4.0L L6 PK256B
🇺🇸 US
Brass
View on
Amazon
MELLING Fits: 4.0L L6 MPE256R
🇺🇸 US 🇲🇽 MX
Steel
View on
Amazon
MELLING Fits: 4.0L L6 MPE701R
🇺🇸 US 🇲🇽 MX
Deep Cup Plug KitSteel
View on
Amazon
MELLING Fits: 4.0L L6 MPE701BR
🇺🇸 US 🇲🇽 MX
Deep Cup Plug KitBrass
View on
Amazon
QUALCAST Fits: 4.0L L6 97126B
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Brass
View on
Amazon

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Harmonic Balancer

Economy

Brand Part Number Markets Notes Buy
SKP Fits: 4.0L L6 SK594018
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ATP Fits: 4.0L L6 102005
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Serpentine
View on
Amazon
DAYCO Fits: 4.0L L6 PB1439N
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Premium
View on
Amazon
PIONEER Fits: 4.0L L6 DA242
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Groove Quantity 6Serpentine
Fitment notes — PIONEER DA242
Groove Quantity 6SerpentineOuter Diameter: 6.72 In
View on
Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Harmonic Balancer Repair Sleeve

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 4.0L L6 A221
🇺🇸 US 🇲🇽 MX
Nickel Plated Formed Steel
Fitment notes — MAHLE / CLEVITE A221
Nickel Plated Formed Steel
0.013 IN Thickness
View on
Amazon

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface.

Intake & Exhaust Manifold Gasket Set

Brand Part Number Markets Notes Buy
APEX Popular Fits: 4.0L L6 AMS2702
🇺🇸 US 🇲🇽 MX
View on
Amazon
MAHLE / CLEVITE Popular Fits: 4.0L L6 MS16315
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi-Layered Steel
View on
Amazon
ELRING Fits: 4.0L L6 651610
🇺🇸 US 🇲🇽 MX
RubiconBody code: TJ
View on
Amazon
FEL-PRO Fits: 4.0L L6 MS93094
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MOPAR Fits: 4.0L L6 4854038
🇺🇸 US
4 speed trans.Trans. code 42RLE
Fitment notes — MOPAR 4854038
4 speed trans.Trans. code 42RLE93.4" wheelbaseAutomatic trans.RubiconSportUnlimitedUnlimited RubiconX Model
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 711476100
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Material: Fiber and Metal
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 711944400
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Material: Composite
View on
Amazon

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Valve

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 V4342
🇺🇸 US 🇲🇽 MX
.3115 stem1.910 Head
Fitment notes — ENGINETECH V4342
.3115 stem1.910 HeadThree Groove
View on
Amazon
MELLING Fits: 4.0L L6 V1916
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
QUALCAST Fits: 4.0L L6 101916
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
1.910 Head Diameter. 3 Groove.
View on
Amazon
SBI Fits: 4.0L L6 01916
🇺🇸 US
SportUnlimited Rubicon
Fitment notes — SBI 01916
SportUnlimited RubiconX Model3 Groove
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Motor Mount

Economy

Brand Part Number Markets Notes Buy
SKP Fits: 4.0L L6 SKM2883
🇺🇸 US 🇲🇽 MX
Fits Front Right
Fitment notes — SKP SKM2883
Fits:
Front Right
or:
Front Left
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ANCHOR Popular Fits: 4.0L L6 2883
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front Right
Fitment notes — ANCHOR 2883
Fits:
Front Right
or:
Front Left
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 4.0L L6 A2883
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front Right
Fitment notes — DEA / MARMON RIDE CONTROL A2883
Fits:
Front Right
or:
Front Left
View on
Amazon
PIONEER Fits: 4.0L L6 600883
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front Right
Fitment notes — PIONEER 600883
Fits:
Front Right
or:
Front Left
View on
Amazon
WESTAR Fits: 4.0L L6 EM2883
🇺🇸 US 🇲🇽 MX
Front
View on
Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Motor Mount Kit

Brand Part Number Markets Notes Buy
ANCHOR Popular Fits: 4.0L L6 300184
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 4.0L L6 MK5025
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes: 1 X A2882 (Trans.), 2 X A2883 (Front Left+Right)
View on
Amazon
ENERGY SUSPENSION Fits: 4.0L L6 21104G
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Motor Mount Set2 Per Set
Fitment notes — ENERGY SUSPENSION 21104G
Motor Mount Set2 Per SetPerformance Polyurethane
Fits:
Must Reuse Existing Outer Metal Shellsor Rubicon or SportMust Reuse Existing Outer Metal Shells
View on
Amazon
SKP Fits: 4.0L L6 SKM3050K
🇺🇸 US 🇲🇽 MX
Contains: SKM2882 (Trans), 2 x SKM2883 (Front Left & Front Right)
View on
Amazon
WESTAR Fits: 4.0L L6 ETK100
🇺🇸 US 🇲🇽 MX
View on
Amazon

This table covers the Motor Mount kits.

Oil

Summary: Notes list SAE 5W-20, SAE 5W-30 and SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE, MOBIL and LIQUI MOLY.

Conventional

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 4.0L L6 797578
🇺🇸 US 🇲🇽 MX
Daily Protection SAE 10W-30 Conventional1 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881156
🇺🇸 US 🇲🇽 MX
Daily Protection SAE 10W-30 ConventionalEasy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881046
🇺🇸 US 🇲🇽 MX
Daily Protection SAE 10W-30 Conventional5 Gallon Bay Box
View on
Amazon

Full Synthetic

Brand Part Number Markets Notes Buy
MOBIL Popular Fits: 4.0L L6 125195
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Full Synthetic 5W-30Mobil Full Synthetic
Fitment notes — MOBIL 125195
Full Synthetic 5W-30Mobil Full SyntheticSAE 5W-301 Quart
View on
Amazon
MOBIL Popular Fits: 4.0L L6 124315
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
5W-30Mobil 1 Advanced
Fitment notes — MOBIL 124315
5W-30Mobil 1 AdvancedFull SyntheticSAE 5W-301 Quart
View on
Amazon
IDEMITSU Fits: 4.0L L6 30013015750
🇺🇸 US
Full Synthetic 5W-30 GF-6/SP1 Quart
View on
Amazon
IDEMITSU Fits: 4.0L L6 30013015953
🇺🇸 US
Full Synthetic 5W-30 GF-6/SP5 Quart
View on
Amazon
LIQUI MOLY Fits: 4.0L L6 20136
🇺🇸 US 🇲🇽 MX
Special Tec AA 5W-301 Liter
View on
Amazon
LIQUI MOLY Fits: 4.0L L6 20226
🇺🇸 US 🇲🇽 MX
Molygen New Generation 5W-301 Liter
View on
Amazon
LIQUI MOLY Fits: 4.0L L6 20138
🇺🇸 US 🇲🇽 MX
Special Tec AA 5W-305 Liter
View on
Amazon
LIQUI MOLY Fits: 4.0L L6 20228
🇺🇸 US 🇲🇽 MX
Molygen New Generation 5W-305 Liter
View on
Amazon
MOBIL Fits: 4.0L L6 122319
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
10W-30Mobil 1 Advanced
Fitment notes — MOBIL 122319
10W-30Mobil 1 AdvancedFull SyntheticSAE 10W-301 Quart
View on
Amazon
MOBIL Fits: 4.0L L6 102990
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Performance 10W-30Mobil 1 Extended Performance
Fitment notes — MOBIL 102990
Extended Performance 10W-30Mobil 1 Extended PerformanceFull SyntheticSAE 10W-301 Quart
View on
Amazon
MOBIL Fits: 4.0L L6 112627
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Performance 5W-30Mobil 1 Extended Performance
Fitment notes — MOBIL 112627
Extended Performance 5W-30Mobil 1 Extended PerformanceFull SyntheticSAE 5W-301 Quart
View on
Amazon
MOBIL Fits: 4.0L L6 124595
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Truck & SUV 5W-30Mobil 1 Truck & SUV
Fitment notes — MOBIL 124595
Truck & SUV 5W-30Mobil 1 Truck & SUVFull SyntheticSAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 VV927
🇺🇸 US 🇲🇽 MX
Advanced Protection Full Synthetic SAE 5W-201 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 VV955
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Advanced Protection Full Synthetic SAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 VV935
🇺🇸 US 🇲🇽 MX
Advanced Full Synthetic SAE 10W-301 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 891678
🇺🇸 US 🇲🇽 MX
Extended Protection Full Synthetic SAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 904564
🇺🇸 US 🇲🇽 MX
Restore & Protect Full Synthetic SAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881147
🇺🇸 US 🇲🇽 MX
Advanced Protection Full Synthetic SAE 5W-20Easy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 891670
🇺🇸 US 🇲🇽 MX
Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 904566
🇺🇸 US 🇲🇽 MX
Restore & Protect Full Synthetic SAE 5W-305 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881164
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881165
🇺🇸 US 🇲🇽 MX
Advanced Full Synthetic SAE 10W-30Easy Pour 5 Quart
View on
Amazon

High Mileage (>75,000 Miles)

Brand Part Number Markets Notes Buy
VALVOLINE Popular Fits: 4.0L L6 VV1556
🇺🇸 US 🇲🇽 MX
Max Life High Mileage Synthetic Blend SAE 5W-301 Quart
View on
Amazon
MOBIL Fits: 4.0L L6 125201
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Full Synthetic High Mileage 5W-301 Quart
View on
Amazon
MOBIL Fits: 4.0L L6 103535
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High Mileage 10W-30Mobil 1 High Mileage
Fitment notes — MOBIL 103535
High Mileage 10W-30Mobil 1 High MileageFull SyntheticSAE 10W-301 Quart
View on
Amazon
MOBIL Fits: 4.0L L6 103767
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High Mileage 5W-30Mobil 1 High Mileage
Fitment notes — MOBIL 103767
High Mileage 5W-30Mobil 1 High MileageFull SyntheticSAE 5W-301 Quart
View on
Amazon
MOBIL Fits: 4.0L L6 123842
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Performance High Mileage 5W-30Synthetic
Fitment notes — MOBIL 123842
Extended Performance High Mileage 5W-30Synthetic1 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 797976
🇺🇸 US 🇲🇽 MX
Max Life High Mileage Synthetic Blend SAE 10W-301 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 849644
🇺🇸 US 🇲🇽 MX
Full Synthetic High Mileage with Max Life Technology SAE 5W-201 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 VV179
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 VV180
🇺🇸 US 🇲🇽 MX
Full Synthetic High Mileage with Max Life Technology SAE 10W-301 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881163
🇺🇸 US 🇲🇽 MX
Max Life High Mileage Synthetic Blend SAE 5W-30Easy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881161
🇺🇸 US 🇲🇽 MX
High Mileage with Max Life Technology Synthetic Blend SAE 10W-30Easy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881170
🇺🇸 US 🇲🇽 MX
Full Synthetic High Mileage with Max Life Technology SAE 10W-30Easy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881169
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881171
🇺🇸 US 🇲🇽 MX
Full Synthetic High Mileage with Max Life Technology SAE 5W-20Easy Pour 5 Quart
View on
Amazon

Racing

Brand Part Number Markets Notes Buy
IDEMITSU Fits: 4.0L L6 30018100750
🇺🇸 US
10W30 Rotary Racing Oil1 Quart
View on
Amazon

Synthetic Blend

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 4.0L L6 109290
🇺🇸 US
Synthetic BlendAPI SP Specifications
Fitment notes — ACDELCO 109290
Synthetic BlendAPI SP SpecificationsSAE 5W-305 Quart
View on
Amazon
MOBIL Popular Fits: 4.0L L6 124406
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Super 10W-30Mobil Super
Fitment notes — MOBIL 124406
Super 10W-30Mobil SuperSynthetic BlendSAE 10W-305 Quart
View on
Amazon
MOBIL Popular Fits: 4.0L L6 124407
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Super 5W-30Mobil Super
Fitment notes — MOBIL 124407
Super 5W-30Mobil SuperSynthetic BlendSAE 5W-305 Quart
View on
Amazon
ACDELCO Fits: 4.0L L6 109292
🇺🇸 US
Synthetic BlendAPI SP Specifications
Fitment notes — ACDELCO 109292
Synthetic BlendAPI SP SpecificationsSAE 10W-301 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 797974
🇺🇸 US 🇲🇽 MX
Daily Protection SAE 5W-20 Synthetic Blend1 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 797975
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Daily Protection SAE 5W-30 Synthetic Blend1 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881158
🇺🇸 US 🇲🇽 MX
Daily Protection SAE 5W-20 Synthetic BlendEasy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: 4.0L L6 881159
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Daily Protection SAE 5W-30 Synthetic BlendEasy Pour 5 Quart
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler Mounting Kit

Brand Part Number Markets Notes Buy
HAYDEN Fits: 4.0L L6 238
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rubber Block Mounting Kit for Heavy Duty Oil Cooler
View on
Amazon
HAYDEN Fits: 4.0L L6 153
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Metal Mounting Bracket Kit for Heavy Duty Oil Cooler
View on
Amazon

This table covers the Oil Cooler Mounting kits.

Oil Dipstick / Tube

Brand Part Number Markets Notes Buy
AUTOTECNICA Fits: 4.0L L6 JE1421502
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Dipstick Only
View on
Amazon
DORMAN Fits: 4.0L L6 917366
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Dipstick Only
View on
Amazon

This table covers the Oil Dipstick tubes.

Oil Drain Plug

Brand Part Number Markets Notes Buy
AGS Fits: 4.0L L6 ODP00016
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
1/2-20
View on
Amazon
DORMAN Fits: 4.0L L6 090052
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pilot PointThread Size
Fitment notes — DORMAN 090052
Pilot PointThread Size1/2"-20Head Size: 9/16"
1/2" x 20 Thread9/16" Head
View on
Amazon
DORMAN Fits: 4.0L L6 090058
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pilot PointMolded Gasket
Fitment notes — DORMAN 090058
Pilot PointMolded Gasket1/2-20Head Size 5/8 In.
1/2" x 20 Thread
View on
Amazon
REIN Fits: 4.0L L6 HWU0116
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Filler Cap

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 4.0L L6 80984
🇺🇸 US 🇲🇽 MX
View on
Amazon
CALORSTAT Fits: 4.0L L6 OC2317
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
PlasticScrewithoutn
View on
Amazon
GATES Fits: 4.0L L6 31118
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MOTORAD Fits: 4.0L L6 MO111
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Material: Plastic
View on
Amazon
SKP Fits: 4.0L L6 SKMO111
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
BOSCH Fits: 4.0L L6 72137WS
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Workshop Oil Filter
View on
Amazon
FRAM Fits: 4.0L L6 FE16
🇺🇸 US 🇨🇦 CA
Spin-OnTough Guard or Synthetic Endurance
View on
Amazon
FVP Fits: 4.0L L6 R1085
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
PRO-TEC Fits: 4.0L L6 PXL51085
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
PUROLATOR Fits: 4.0L L6 TL14670
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bypass Relief Valve Setting: 8-16 PSIClass: B
Fitment notes — PUROLATOR TL14670
Bypass Relief Valve Setting: 8-16 PSIClass: BMedia Material: CelluloseThread Size: 3/4-16 In
View on
Amazon
VARIOUS MFR Fits: 4.0L L6 PG4670
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spin-On
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Popular Fits: 4.0L L6 M1204A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Performance
View on
Amazon
WIX Popular Fits: 4.0L L6 51085XP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
XP Extreme DutyBest for Synthetic Motor Oils
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MOTORCRAFT Popular Fits: 4.0L L6 FL300
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
WIX Popular Fits: 4.0L L6 51085
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bypass Relief Valve Setting: 8-11 PSI
View on
Amazon
ACDELCO Fits: 4.0L L6 PF53
🇺🇸 US 🇨🇦 CA
Gold / Professional or Gold / Professional DurapackSpin-On
View on
Amazon
BOSCH Fits: 4.0L L6 3402
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Premium Oil Filter
View on
Amazon
DENSO Fits: 4.0L L6 1502062
🇺🇸 US 🇲🇽 MX
Engine Oil Filter or FTF Engine Oil Filter
View on
Amazon
HASTINGS / BALDWIN Fits: 4.0L L6 LF142
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
HENGST Fits: 4.0L L6 H10W15
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Filter Media Material: Enhanced CelluloseSpin-On
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 OC338
🇺🇸 US 🇲🇽 MX
Spin-On87.00mm Height
View on
Amazon
MANN Fits: 4.0L L6 W92017
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
VARIOUS MFR Fits: 4.0L L6 PG4670EX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended LifeSpin-On
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Adapter Gasket / O-Ring

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 4.0L L6 70301
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
FEL-PRO Fits: 4.0L L6 ES72962
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 GS33781
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Oil Filter Adapter GasketRubber
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 711347400
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Filter Gasket

Brand Part Number Markets Notes Buy
APEX Fits: 4.0L L6 AOM6001
🇺🇸 US 🇲🇽 MX
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 711348900
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AT OIL FILTER ADAPTER
View on
Amazon

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pan

Brand Part Number Markets Notes Buy
SKP Popular Fits: 4.0L L6 SK264239
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
SPECTRA PREMIUM Popular Fits: 4.0L L6 CRP06C
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
GASKET AND/OR SEALANT NOT INCLUDED
View on
Amazon
ATP Fits: 4.0L L6 103276
🇺🇸 US 🇲🇽 MX
without Oil Level Sensor
View on
Amazon
ATP Fits: 4.0L L6 103072
🇨🇦 CA
with Oil Level Sensorwithout Sensor Hole
View on
Amazon
DORMAN Fits: 4.0L L6 264239
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
LILAND GLOBAL Fits: 4.0L L6 ICRP06C
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
PIONEER Fits: 4.0L L6 501201
🇺🇸 US 🇲🇽 MX
without Oil Level Sensor
View on
Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 OJ242
🇺🇸 US 🇲🇽 MX
ONE Piece Molded Gasket
View on
Amazon
FEL-PRO Popular Fits: 4.0L L6 OS34308R
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Permadry 1 - Piece Molded Rubber Gasket Included
View on
Amazon
APEX Fits: 4.0L L6 AOP271
🇺🇸 US 🇲🇽 MX
View on
Amazon
ELRING Fits: 4.0L L6 651680
🇺🇸 US 🇲🇽 MX
RubiconBody code: TJ
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 OS32118
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Molded Rubber
View on
Amazon
SKP Fits: 4.0L L6 SKOS34308R
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
without BOLTS
View on
Amazon
ULTRA-POWER Fits: 4.0L L6 OS34308R
🇺🇸 US 🇨🇦 CA
SetPiece Molded Rubber Gasket Included
Fitment notes — ULTRA-POWER OS34308R
SetPiece Molded Rubber Gasket IncludedMolded Rubber
1
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 101019801
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Improved Design
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump

Economy

Brand Part Number Markets Notes Buy
SKP Popular Fits: 4.0L L6 SKOM81A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes: Oil Pump, Gasket Set
View on
Amazon
ENGINETECH Fits: 4.0L L6 EPK103
🇺🇸 US
'Pressure King' Value Line Pump
Fitment notes — ENGINETECH EPK103
'Pressure King' Value Line Pump
Stock
View on
Amazon
SKP Fits: 4.0L L6 SKM167HVS
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Oil Pickup Tube and Screen Included
View on
Amazon

High Volume / Pressure

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 EP167HVS
🇺🇸 US
High Volume
Fitment notes — ENGINETECH EP167HVS
High Volume
INCLUDES SCREEN
View on
Amazon
MELLING Fits: 4.0L L6 M167HVS
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High Volume PumpIncludes Oil Pickup Tube and Screen
View on
Amazon
SEALED POWER Fits: 4.0L L6 22443505
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High VolumeIncludes Oil Pickup Tube and Screen
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 4.0L L6 M81A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ENGINETECH Fits: 4.0L L6 EP81A
🇺🇸 US
Stock
View on
Amazon
SEALED POWER Fits: 4.0L L6 22441198
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Strainer Not Included
View on
Amazon

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Oil Pump Pickup Tube / Screen

Brand Part Number Markets Notes Buy
MELLING Fits: 4.0L L6 242S
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
SEALED POWER Fits: 4.0L L6 22414270
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the pickup tubes and screens that feed the oil pump.

Oil Pump Repair Kit

Brand Part Number Markets Notes Buy
MELLING Fits: 4.0L L6 K81A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Use To Repair M-81A Oil PumpCover with Tab And Slotted Hole
View on
Amazon
SEALED POWER Fits: 4.0L L6 22451198
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Use with Oil Pump That Has Cover with Tab & Slotted Hole
View on
Amazon

This table covers the Oil Pump repair kits.

Oil Pump Seal

Brand Part Number Markets Notes Buy
MOPAR Fits: 4.0L L6 4659945
🇺🇸 US 🇨🇦 CA
Transmission-4-SPD. Automatic, 42RLE
View on
Amazon

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Piston

Brand Part Number Markets Notes Buy
SEALED POWER Popular Fits: 4.0L L6 H802CP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
HypereutecticAlloy
Fitment notes — SEALED POWER H802CP
HypereutecticAlloyRing Groove Widths: 1.5mm, 1.5mm, 4.0mmDuroshield Coated Skirt
0.116 IN Deep Recess
View on
Amazon
ENGINETECH Fits: 4.0L L6 P30716
🇺🇸 US
D Shaped Recessed HeadHypereutectic Coated skirt
View on
Amazon
ENGINETECH Fits: 4.0L L6 P3071
🇺🇸 US
shaped Recessed HeadHypereutectic Coated skirt
View on
Amazon
ENGINETECH Fits: 4.0L L6 K30716P
🇺🇸 US
D Shaped Recessed HeadHypereutectic Coated skirt
Fitment notes — ENGINETECH K30716P
D Shaped Recessed HeadHypereutectic Coated skirtwith Premium Rings
1.592 Compression Height
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 2243415
🇺🇸 US 🇲🇽 MX
Skirt Coated
View on
Amazon

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.

Piston Ring

Premium

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 S38816
🇺🇸 US
PremiumSet
Fitment notes — ENGINETECH S38816
PremiumSetMoly Coated
Steel or Moly Top1.5mm / 1.5mm / 4.0mm
View on
Amazon
SEALED POWER Popular Fits: 4.0L L6 E925K
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
PremiumRing Groove Widths: 1.5mm, 1.5mm, 4.0mm
Fitment notes — SEALED POWER E925K
PremiumRing Groove Widths: 1.5mm, 1.5mm, 4.0mmSetMoly Steel Top RingDuctile Second Ring
Use with H802CP Piston
View on
Amazon
HASTINGS MANUFACTURING Fits: 4.0L L6 2M4815
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Plasma Moly Top RingTop Ring Surface Treatment: Plasma Moly
Fitment notes — HASTINGS MANUFACTURING 2M4815
Plasma Moly Top RingTop Ring Surface Treatment: Plasma MolyFull Setfor 2 Ring Pistonwith Shallow Oil Groove
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 41870CP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
PremiumMaterial Cast Iron / Cast Iron / Stainless Steel
Fitment notes — MAHLE / CLEVITE 41870CP
PremiumMaterial Cast Iron / Cast Iron / Stainless SteelSetAxial Height: 1.5MM / 1.5MM / 4.0MMFacing: Plasma-Moly / Chrome
Shallow Groove
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING Fits: 4.0L L6 4815S
🇺🇸 US 🇲🇽 MX
1 Cylinder SetFor 2 Ring Piston
Fitment notes — HASTINGS MANUFACTURING 4815S
1 Cylinder SetFor 2 Ring Pistonwith Shallow Oil Groove
View on
Amazon
HASTINGS MANUFACTURING Fits: 4.0L L6 4815
🇺🇸 US 🇲🇽 MX
Full SetTop Ring Surface Treatment: Phosphate
Fitment notes — HASTINGS MANUFACTURING 4815
Full SetTop Ring Surface Treatment: Phosphatefor 2 Ring Pistonwith Shallow Oil Groove
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 51870CP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetChrome Facing
Fitment notes — MAHLE / CLEVITE 51870CP
SetChrome FacingMaterial Cast Iron / Cast Iron / Stainless SteelAxial Height: 1.5MM / 1.5MM / 4.0MM
Shallow Groove
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Push Rod

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 EPR437
🇺🇸 US 🇲🇽 MX
View on
Amazon
MELLING Fits: 4.0L L6 MPR437
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MOPAR Fits: 4.0L L6 33002986
🇺🇸 US
Fits 103.4" wheelbaseAutomatic trans.
Fitment notes — MOPAR 33002986
Fits:
103.4" wheelbaseAutomatic trans.UnlimitedUnlimited Rubicon4 speed trans.Trans. code 42RLE
or:
93.4" wheelbaseAutomatic trans.RubiconSportX Model4 speed trans.Trans. code 42RLE
View on
Amazon
QUALCAST Fits: 4.0L L6 746437
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
9.638 Length.
View on
Amazon

This table covers the pushrods that transfer lifter motion to the rocker arms.

Re-Ring Kit

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 RMJ242EP
🇺🇸 US
Re-Main KitPremium
Fitment notes — ENGINETECH RMJ242EP
Re-Main KitPremium
Camshaft nose has Keyway
ENGINETECH BB612J [Connecting Rod Bearing] Set
Choose Size: 0.020" Undersize0.030" Undersize Standard 0.020" Undersize0.030" Undersize StandardIntentionally blank Intentionally blank Choose
ENGINETECH BC468J [Crankshaft Main Bearing] Set
Choose Size: 0.010" Undersize0.020" Undersize 0.010" Undersize0.020" Undersize Intentionally blank Intentionally blank Choose
ENGINETECH S38816 [Piston Ring] PremiumSetMoly Coated
Choose Size: 0.020" Oversize0.030" Oversize0.040" Oversize0.060" Oversize Standard 0.020" Oversize0.030" Oversize0.040" Oversize0.060" Oversize StandardIntentionally blank Intentionally blank Choose
View on
Amazon

This table covers the Re-Ring kits.

Rocker Arm

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 ERK5512
🇺🇸 US 🇲🇽 MX
Contains (2) arms, (2) pivots and (1) bridge
View on
Amazon
MELLING Fits: 4.0L L6 MR740
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MELLING Fits: 4.0L L6 MRK5512
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Kit
View on
Amazon
QUALCAST Fits: 4.0L L6 402740
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rocker Arm, Stamped
View on
Amazon

This table covers the rocker arms that transfer cam motion to the valves.

Rocker Arm Pivot

Brand Part Number Markets Notes Buy
MELLING Fits: 4.0L L6 MRM1717
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the pivots each rocker arm sits on.

Thrust Washer

Brand Part Number Markets Notes Buy
DORMAN Fits: 4.0L L6 618027
🇺🇸 US 🇲🇽 MX
Inside Dia: 24.7mmOutside Dia.: 45.1mm
Fitment notes — DORMAN 618027
Inside Dia: 24.7mmOutside Dia.: 45.1mmThickness: 4.7mm
View on
Amazon

This table covers the Thrust washers.

Timing Cam Sprocket

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 4.0L L6 S822
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
CLOYES Fits: 4.0L L6 S822T
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ENGINETECH Fits: 4.0L L6 SP385B
🇺🇸 US
Fits camshafts with keyway
View on
Amazon
FVP Fits: 4.0L L6 S822T
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon
PREFERRED COMPONENTS INC Fits: 4.0L L6 G55822
🇺🇸 US 🇲🇽 MX
Keyway Style
View on
Amazon

This table covers the Timing Cam sprockets.

Timing Chain

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 4.0L L6 385
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
CLOYES Fits: 4.0L L6 C385
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
INA Fits: 4.0L L6 ZCC385
🇺🇸 US 🇲🇽 MX
View on
Amazon
PREFERRED COMPONENTS INC Fits: 4.0L L6 C385
🇺🇸 US 🇲🇽 MX
View on
Amazon
S.A. GEAR Fits: 4.0L L6 C385
🇺🇸 US 🇲🇽 MX
Chain
View on
Amazon

This table covers the timing chains that keep the cams in time with the crank.

Timing Chain & Component Kit

Economy

Brand Part Number Markets Notes Buy
PREFERRED COMPONENTS INC Fits: 4.0L L6 TS13341
🇺🇸 US 🇲🇽 MX
View on
Amazon
S.A. GEAR Fits: 4.0L L6 785819R
🇺🇸 US 🇲🇽 MX
Billet Steel Roller .250
View on
Amazon
ULTRA-POWER Fits: 4.0L L6 90385SA
🇺🇸 US 🇨🇦 CA
View on
Amazon
ULTRA-POWER Fits: 4.0L L6 C3225
🇺🇸 US 🇨🇦 CA
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
CLOYES Popular Fits: 4.0L L6 90385SA
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes: Timing Chain, Timing Damper, Crankshaft Sprocket, Camshaft Sprocket
View on
Amazon
MELLING Popular Fits: 4.0L L6 3385SB
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
CLOYES Fits: 4.0L L6 C3225
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Timing SetSet Contains: Timing Chain, Crankshaft Sprocket, Camshaft Sprocket
View on
Amazon
ENGINETECH Fits: 4.0L L6 TS385B
🇺🇸 US 🇲🇽 MX
Fits camshafts with keyway
View on
Amazon

This table covers kits that group a timing chain with the related tensioners and guides.

Timing Chain Guide / Damper

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 D337
🇺🇸 US 🇲🇽 MX
View on
Amazon
MELLING Popular Fits: 4.0L L6 BG337
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
CLOYES Fits: 4.0L L6 95337
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
DAMPER
Fitment notes — CLOYES 95337
DAMPER
Right
View on
Amazon
INA Fits: 4.0L L6 ZG95337
🇺🇸 US 🇲🇽 MX
View on
Amazon
PREFERRED COMPONENTS INC Fits: 4.0L L6 R75337
🇺🇸 US 🇲🇽 MX
View on
Amazon
S.A. GEAR Fits: 4.0L L6 7337
🇺🇸 US 🇲🇽 MX
View on
Amazon

This table covers the guides and dampers that keep the timing chain on its path.

Timing Cover

Brand Part Number Markets Notes Buy
ATP Fits: 4.0L L6 103702
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
DORMAN Fits: 4.0L L6 635409
🇺🇸 US 🇲🇽 MX
View on
Amazon
PIONEER Fits: 4.0L L6 500244
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Timing covers.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 4.0L L6 TCS45117
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Repair Sleeve Not Included
Fitment notes — FEL-PRO TCS45117
Repair Sleeve Not Included
Must Use with Part Number(s) OS 34308 R
View on
Amazon
FEL-PRO Popular Fits: 4.0L L6 TCS45458
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Sleeve 'N' Seal
Fitment notes — FEL-PRO TCS45458
with Sleeve 'N' Seal
Must Use with Part Number(s) OS 34308 R
View on
Amazon
APEX Fits: 4.0L L6 ATC2480
🇺🇸 US 🇲🇽 MX
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 JV1166
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 151018701
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — VICTOR REINZ 151018701
Set
without Sleeve
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 151017801
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — VICTOR REINZ 151017801
Set
with Repair Sleeve
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Repair Sleeve

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 4.0L L6 16210
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Use with Installation Tool
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 711519700
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the wear sleeves used to restore a Timing Cover seal surface.

Timing Cover Repair Sleeve Tool

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 4.0L L6 16312
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes.

Timing Cover Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 4.0L L6 46134
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rubber
View on
Amazon
SCHAEFFLER Fits: 4.0L L6 SS6588
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
7.95 mm Width57.30 mm Outside Diameter
Fitment notes — SCHAEFFLER SS6588
7.95 mm Width57.30 mm Outside Diameter45.24 mm Inside Diameter
View on
Amazon
SKF Fits: 4.0L L6 17800A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
WJB / INMOTION PARTS Fits: 4.0L L6 WS17800A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
1.781 Shaft Diameter2.252 Bore Diameter
Fitment notes — WJB / INMOTION PARTS WS17800A
1.781 Shaft Diameter2.252 Bore Diameter2.256 Outside Diameter Seal0.313 Width
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Timing Crank Sprocket

Brand Part Number Markets Notes Buy
CLOYES Popular Fits: 4.0L L6 S809
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
S.A. GEAR Popular Fits: 4.0L L6 S809
🇺🇸 US 🇲🇽 MX
View on
Amazon
ENGINETECH Fits: 4.0L L6 SP385B1
🇺🇸 US
Fits camshafts with keyway
View on
Amazon
FVP Fits: 4.0L L6 S809
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Outer
View on
Amazon
INA Fits: 4.0L L6 ZSS809
🇺🇸 US 🇲🇽 MX
View on
Amazon
PREFERRED COMPONENTS INC Fits: 4.0L L6 G55809
🇺🇸 US 🇲🇽 MX
View on
Amazon

This table covers the crankshaft sprockets that drive the timing chain or belt.

Torque Damper

Brand Part Number Markets Notes Buy
FVP Fits: 4.0L L6 ETD940109
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontFits Original Engine Only
View on
Amazon

This table covers the Torque dampers.

Valve Cover

Brand Part Number Markets Notes Buy
AUTOTECNICA Fits: 4.0L L6 JE1423316
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
DORMAN Fits: 4.0L L6 264983
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Valve covers.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 4.0L L6 VS50458R
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Permadry Molded RubberIncludes Valve Cover Grommets
View on
Amazon
ULTRA-POWER Popular Fits: 4.0L L6 VS50458R
🇺🇸 US 🇨🇦 CA
SetIncludes Molded Rubber Gasket(s), Valve Cover Grommets
Fitment notes — ULTRA-POWER VS50458R
SetIncludes Molded Rubber Gasket(s), Valve Cover GrommetsMolded Rubber
View on
Amazon
AJUSA Fits: 4.0L L6 11100300
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Engine 242
Fitment notes — AJUSA 11100300
Fits:
Engine 242
or:
Engine ERH
View on
Amazon
APEX Fits: 4.0L L6 AVC271S
🇺🇸 US 🇲🇽 MX
Includes Grommets
View on
Amazon
ELRING Fits: 4.0L L6 575280
🇺🇸 US 🇲🇽 MX
RubiconBody code: TJ
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 VS50266
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMolded Rubber / Steel
View on
Amazon
SKP Fits: 4.0L L6 SKVS50458R
🇺🇸 US 🇲🇽 MX
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 151066801
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Guide

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 GD7847
🇺🇸 US 🇲🇽 MX
Iron
Fitment notes — ENGINETECH GD7847
Iron
Intake.3135 X .5020 X 2.250Spiral IDwith .534 seal boss
View on
Amazon
ENGINETECH Fits: 4.0L L6 GD9848
🇺🇸 US
Iron
Fitment notes — ENGINETECH GD9848
Iron
Intake and Exhaust .3135 X .5020 X 2.438Spiral ID
View on
Amazon
QUALCAST Fits: 4.0L L6 307847
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Intake2.250 OAL. with Seal Boss
View on
Amazon
QUALCAST Fits: 4.0L L6 308494
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Exhaust2.436 OAL. with Seal Boss
View on
Amazon
QUALCAST Fits: 4.0L L6 309848
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Exhaust2.438 Overall Length. Conversion
View on
Amazon

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.

Valve Lifter

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 L2011
🇺🇸 US 🇲🇽 MX
Hydraulic
Fitment notes — ENGINETECH L2011
Hydraulic
Flat follower
View on
Amazon
AJUSA Fits: 4.0L L6 85007600
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Engine 242
Fitment notes — AJUSA 85007600
Fits:
Engine 242
or:
Engine ERH
View on
Amazon
MELLING Fits: 4.0L L6 JB2011
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Hydraulic
View on
Amazon
QUALCAST Fits: 4.0L L6 362011CCI
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Hydraulic FlatChilled Cast Iron
View on
Amazon
SEALED POWER Fits: 4.0L L6 HT2011
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Hydraulic
Fitment notes — SEALED POWER HT2011
Hydraulic
with 2 Grooves
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Seat

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 ST20001
🇺🇸 US
Hi-Chrome1.750 X 2.0055 X .2188
Fitment notes — ENGINETECH ST20001
Hi-Chrome1.750 X 2.0055 X .2188
Intake45 Degree
View on
Amazon
ENGINETECH Popular Fits: 4.0L L6 ST156236
🇺🇸 US
Hi-Chrome1.313 X 1.5642 X .1875
Fitment notes — ENGINETECH ST156236
Hi-Chrome1.313 X 1.5642 X .1875
Exhaust45 Degree
View on
Amazon
DURA-BOND Fits: 4.0L L6 30840
🇺🇸 US 🇨🇦 CA
Fits Exhaustor ExhaustSport
Fitment notes — DURA-BOND 30840
Fits:
Exhaustor ExhaustSportUnlimited RubiconX Model
View on
Amazon
DURA-BOND Fits: 4.0L L6 30691
🇺🇸 US 🇨🇦 CA
Fits Intak
Fitment notes — DURA-BOND 30691
Fits:
Intak
or:
IntakeSportUnlimited RubiconX Model
View on
Amazon
QUALCAST Fits: 4.0L L6 20156236
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
INSERT
Fitment notes — QUALCAST 20156236
INSERT
Exhaust1-5/16 I.D. 1-9/16 O.D. 3/16 Depth.
View on
Amazon
QUALCAST Fits: 4.0L L6 2020001
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
INSERT
Fitment notes — QUALCAST 2020001
INSERT
Intake1-3/4 I.D. 2.000 O.D. 7/32 Depth.
View on
Amazon

This table covers the Valve seats.

Valve Spring

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 ERV2225
🇺🇸 US
Intake and Exhaust
View on
Amazon
MELLING Fits: 4.0L L6 VS2225
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MELLING Fits: 4.0L L6 VTSS100
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High Performance
Fitment notes — MELLING VTSS100
High Performance
Setup Spring
View on
Amazon
QUALCAST Fits: 4.0L L6 322225
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
1.890 Free Length.
View on
Amazon
SBI Fits: 4.0L L6 1601483
🇺🇸 US
Conical
Fitment notes — SBI 1601483
Conical
Intake or ExhaustSportUnlimited RubiconX Model1.930 Length,1.334T O.D.,0.964T I.D
View on
Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer Keeper

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 4.0L L6 EPF1083
🇺🇸 US 🇨🇦 CA
Intake and Exhaust3 Round bead type
View on
Amazon
MELLING Fits: 4.0L L6 VL1083
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
QUALCAST Fits: 4.0L L6 3400515
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
3 Round Grooves
View on
Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 4.0L L6 S2969
🇺🇸 US 🇲🇽 MX
Viton
Fitment notes — ENGINETECH S2969
Viton
with 8.0mm stem and 0.500 guide OD
View on
Amazon
FEL-PRO Popular Fits: 4.0L L6 SS72835
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — FEL-PRO SS72835
Set
Intake and Exhaust
View on
Amazon
APEX Fits: 4.0L L6 AVS2056
🇺🇸 US 🇲🇽 MX
Set
Fitment notes — APEX AVS2056
Set
Intake and Exhaust
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 SS45799
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMetal with Molded Rubber
Fitment notes — MAHLE / CLEVITE SS45799
SetMetal with Molded Rubber
Exhaust
View on
Amazon
MAHLE / CLEVITE Fits: 4.0L L6 SS45798
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMetal with Molded Rubber
Fitment notes — MAHLE / CLEVITE SS45798
SetMetal with Molded Rubber
Intake
View on
Amazon
QUALCAST Fits: 4.0L L6 3880245
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Viton Metal Clad
Fitment notes — QUALCAST 3880245
Viton Metal Clad
Exhaust, For 5/16 Stem
View on
Amazon
VICTOR REINZ Fits: 4.0L L6 121002501
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — VICTOR REINZ 121002501
Set
Fits:
or Intake and Exhaust
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2005 Jeep Wrangler

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil and Oil Filter .

Frequently Asked Questions

How many engine parts fit the 2005 Jeep Wrangler?

Our catalog currently lists 352 engine parts for the 2005 Jeep Wrangler across 71 subcategories and 65 brands, covering both the 2.4L L4 and the 4.0L L6. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2005 Jeep Wrangler engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2005 Jeep Wrangler?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2005 Jeep Wrangler?

Oil rows on this page include SAE 5W-20, SAE 5W-30 and SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2005 Jeep Wrangler was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2005 Jeep Wrangler?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2005 Jeep Wrangler

Engine Parts for Other Jeep Wrangler Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.