2011 Jeep Compass Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1711.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Refrigerant Pressure Switch Connector parts are listed for the 2011 Jeep Compass, from FOUR SEASONS and GPD.

Listed part numbers: FOUR SEASONS 20954 and GPD 1711515.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

10 ABS Wheel Speed Sensor Connector parts for the 2011 Jeep Compass come from 6 brands — STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2082.

This table covers the harness connectors at the Accessory Power Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Accessory Power Relay Connector parts for the 2011 Jeep Compass come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S869 and UNITED MOTOR PRODUCTS CON182.

This table covers the harness connectors at the Air Bag Clockspring. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Jeep Compass — STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Air Intake / Charge Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Air Intake / Charge Temperature Sensor Connector parts are listed for the 2011 Jeep Compass, from STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S1918 and WELLS 1P3631.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1918.

This table covers the harness connectors at the Back Up / Reverse Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Back Up / Reverse Lamp Connector parts are listed for the 2011 Jeep Compass, from STANDARD MOTOR PRODUCTS, WELLS, HOLSTEIN and 1 other brand. WELLS 1P2047 carries the "Popular" badge.

Part numbers include WELLS 1P2047, HOLSTEIN 2HAR0035 and STANDARD MOTOR PRODUCTS HP4347, among others listed above.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Blower Motor Control Module / Resistor Connector parts are listed for the 2011 Jeep Compass, from DORMAN, STANDARD MOTOR PRODUCTS, FOUR SEASONS and 2 other brands. DORMAN 645712 carries the "Popular" badge.

Part numbers include DORMAN 645712, STANDARD MOTOR PRODUCTS S2117 and DORMAN 645725, among others listed above.

This table covers the body-harness connectors and pigtails. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOPAR supplies the 5 Body Wiring Harness / Connector parts for the 2011 Jeep Compass.

Part numbers include MOPAR 5084600AE, MOPAR 5084601AE and MOPAR 68057491AB, among others listed above.

This table covers the harness connectors at the Brake Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Brake Fluid Level Sensor Connector parts are listed for the 2011 Jeep Compass, from STANDARD MOTOR PRODUCTS, ACDELCO and WELLS.

Listed part numbers: ACDELCO PT2386, STANDARD MOTOR PRODUCTS HP3840 and STANDARD MOTOR PRODUCTS TX3A, plus the other parts above.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Brake Light Switch Connector parts are listed for the 2011 Jeep Compass, from WELLS and STANDARD MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S3095, WELLS 1P1824 and WELLS 1P2378.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Camshaft Position Sensor Connector parts for the 2011 Jeep Compass come from 6 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, HOLSTEIN and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2316.

Part numbers include STANDARD MOTOR PRODUCTS S2316, WALKER PRODUCTS 2701145 and HOLSTEIN 2HAR0060, among others listed above.

This table covers the harness connectors at the Clutch Pedal Position / Starter Safety Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Clutch Pedal Position / Starter Safety Switch Connector parts for the 2011 Jeep Compass come from 2 brands — STANDARD MOTOR PRODUCTS and HOLSTEIN.

This group includes HOLSTEIN 2HAR0054, STANDARD MOTOR PRODUCTS HP3925 and STANDARD MOTOR PRODUCTS S738.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Crankshaft Position Sensor Connector parts for the 2011 Jeep Compass come from 3 brands — ROSTRA, WALKER PRODUCTS and WELLS.

Listed part numbers: ROSTRA 610139, WALKER PRODUCTS 2701145 and WELLS 1P2524.

This table covers the harness connectors at the Door Lock Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Door Lock Actuator Connector parts for the 2011 Jeep Compass come from 3 brands — ROSTRA, STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include ROSTRA 610388, STANDARD MOTOR PRODUCTS S2894 and WELLS 1P2668.

This table covers the harness connectors at the Door Lock Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Jeep Compass — STANDARD MOTOR PRODUCTS S2079.

This table covers the wiring-harness connectors at the Door. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOPAR supplies the 5 Door Wiring Harness / Connector parts for the 2011 Jeep Compass.

Part numbers include MOPAR 4795321AD, MOPAR 4795574AD and MOPAR 4795575AD, among others listed above.

This table covers the harness connectors at the Engine Block Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOPAR 5033279AB.

This table covers the wiring-harness connectors at the Engine. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2011 Jeep Compass — MOPAR 68083213AD.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Fuel Injector Connector parts for the 2011 Jeep Compass come from 6 brands — STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945.

Part numbers include STANDARD MOTOR PRODUCTS HP3945, WELLS 1P1344 and ACDELCO PT2160, among others listed above.

This table covers the harness connectors at the Headlamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOPAR 68091539AA.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

STANDARD MOTOR PRODUCTS supplies the 3 Headlamp Wiring Harness / Connector parts for the 2011 Jeep Compass.

Listed part numbers: STANDARD MOTOR PRODUCTS F90008, STANDARD MOTOR PRODUCTS LWH104 and STANDARD MOTOR PRODUCTS LWH106.

This table covers the harness connectors at the High Mount Brake Light. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1877.

This table covers the harness connectors at the Hood Ajar Indicator Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Jeep Compass — WELLS 1P3330.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ignition Coil Connector parts for the 2011 Jeep Compass come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2882 and WELLS 1P2664.

This table covers the harness connectors at the Ignition Starter Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Ignition Starter Switch Connector parts for the 2011 Jeep Compass come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, BWD/NIEHOFF and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S1768.

Listed part numbers: STANDARD MOTOR PRODUCTS S1768, WELLS 1P1558 and BWD/NIEHOFF PT1267, plus the other parts above.

This table covers the harness connectors at the Instrument Panel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

MOPAR supplies the 5 Instrument Panel Connector parts for the 2011 Jeep Compass.

This group includes MOPAR 68083167AB, MOPAR 68083168AB and MOPAR 68083169AB and the remaining parts above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Knock / Detonation Sensor Connector parts for the 2011 Jeep Compass come from 2 brands — WALKER PRODUCTS and WELLS.

Listed part numbers: WALKER PRODUCTS 2701034 and WELLS 1P1819.

This table covers the harness connectors at the License Plate Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Jeep Compass — MOPAR 68001368AA.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Manifold Pressure (MAP) Sensor Connector parts for the 2011 Jeep Compass come from 3 brands — STANDARD MOTOR PRODUCTS, ROSTRA and WELLS.

This group includes ROSTRA 610107, STANDARD MOTOR PRODUCTS S2914 and STANDARD MOTOR PRODUCTS S2086 and the remaining parts above.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Oil Pressure Sender / Switch Connector parts are listed for the 2011 Jeep Compass, from WELLS, ROSTRA, STANDARD MOTOR PRODUCTS and 2 other brands. WELLS 1P1711 carries the "Popular" badge.

Part numbers include WELLS 1P1711, ROSTRA 610040 and STANDARD MOTOR PRODUCTS S2052, among others listed above.

This table covers the harness connectors at the Oil Temperature Sender. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Jeep Compass — STANDARD MOTOR PRODUCTS S2053.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1474.

This table covers the harness connectors at the Park Assist (PAS) Camera. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Jeep Compass — METRA AXACCH4.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Parking / Turn Signal Lamp Connector parts for the 2011 Jeep Compass come from 3 brands — WELLS, DORMAN and STANDARD MOTOR PRODUCTS.

Part numbers include DORMAN 645943, STANDARD MOTOR PRODUCTS S2983 and WELLS 1P1824, among others listed above.

This table covers the harness connectors at the Parking Brake Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Brake Switch Connector parts are listed for the 2011 Jeep Compass, from FAMOUS BRAND and WELLS.

This group includes FAMOUS BRAND PTA3009 and WELLS 1P2226.

This table covers the harness connectors at the Power Window Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Jeep Compass — STANDARD MOTOR PRODUCTS S2079.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies both parts for the 2011 Jeep Compass.

This group includes METRA 716522 and METRA AXADBXHCH2.

This table covers the Repair harnesses. Read more

This group shows a single part: ROSTRA 3500171.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Speed Sensor Connector parts are listed for the 2011 Jeep Compass, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2458, STANDARD MOTOR PRODUCTS ABSK1 and UNITED MOTOR PRODUCTS CON205, plus the other parts above.

This table covers the harness connectors at the Steering Wheel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Steering Wheel Connector parts for the 2011 Jeep Compass come from MOPAR.

Listed part numbers: MOPAR 68018160AC, MOPAR 68087806AC and MOPAR 68088161AB.

This table covers the harness connectors at the Tail Lamp Assembly. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Tail Lamp Assembly Connector parts for the 2011 Jeep Compass come from 2 brands — WELLS and ROSTRA.

Part numbers include ROSTRA 610090, WELLS 1P1645 and WELLS 1P1824.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Temperature Sender / Sensor Connector parts for the 2011 Jeep Compass come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, FOUR SEASONS and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP4665.

Listed part numbers: STANDARD MOTOR PRODUCTS HP4665, WELLS 1P1694 and FOUR SEASONS 37288, plus the other parts above.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1057.

This table covers the harness connectors at the Throttle Position Sensor (TPS). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Throttle Position Sensor (TPS) Connector parts are listed for the 2011 Jeep Compass, from ROSTRA and WELLS.

This group includes ROSTRA 610302 and WELLS 1P2221.

This table covers the harness connectors at the Tire Pressure Monitoring System (TPMS) Control. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P4037.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Trailer Connector parts are listed for the 2011 Jeep Compass, from CURT and TEKONSHA.

This group includes CURT 56344, CURT 58938 and TEKONSHA 118539.

This table covers the wiring-harness connectors at the Transmission-Automatic. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

2 Transmission-Automatic Wiring Harness / Connector parts are listed for the 2011 Jeep Compass, from MOPAR and WELLS.

Listed part numbers: MOPAR 4795865AG and WELLS 1P4037.

This table covers the harness connectors at the Turn Signal Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

WELLS supplies both parts for the 2011 Jeep Compass.

Listed part numbers: WELLS 1P1824 and WELLS 1P3473.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Vapor Canister Purge Valve / Solenoid Connector parts for the 2011 Jeep Compass come from 4 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand.

Listed part numbers: STANDARD MOTOR PRODUCTS S2052, UNITED MOTOR PRODUCTS CON58 and WALKER PRODUCTS 2701132, plus the other parts above.

This table covers the harness connectors at the Vapor Leak Detection Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Vapor Leak Detection Pump Connector parts for the 2011 Jeep Compass come from 2 brands — ROSTRA and WELLS.

Listed part numbers: ROSTRA 610161 and WELLS 1P1626.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Variable Valve Timing (VVT) Solenoid Connector parts for the 2011 Jeep Compass come from 3 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S1716, WALKER PRODUCTS 2701102 and WELLS 1P2683.

This table covers the harness connectors at the Window Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Jeep Compass — WELLS 1P1711.