2018 Jeep Cherokee Engine Parts

This table covers the chains that drive the balance shafts. Read more

7 Balance Shaft Chain parts for the 2018 Jeep Cherokee come from 5 brands — MELLING, S.A. GEAR, CLOYES and 2 other brands. The "Popular" part is CLOYES C965.

In the Chain Only grade, S.A. GEAR, CLOYES, MELLING and 1 other brand supply 5 parts: grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. A representative part number is CLOYES C965.

The Kit section lists 2 options from INA and MELLING — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. INA ZC76312PS is listed in this group.

This group includes CLOYES C965, MELLING 1105 and MOPAR 5047659AA and the remaining parts above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

8 Balance Shaft Chain Guide parts for the 2018 Jeep Cherokee come from 5 brands — PREFERRED COMPONENTS INC, CLOYES, MELLING and 2 other brands. The "Popular" part is PREFERRED COMPONENTS INC R76257.

This group includes PREFERRED COMPONENTS INC R76257, PREFERRED COMPONENTS INC R76256 and CLOYES 96083 and the remaining parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Balance Shaft Chain Tensioner parts are listed for the 2018 Jeep Cherokee, from S.A. GEAR, CLOYES, INA and 2 other brands. S.A. GEAR 91202 carries the "Popular" badge.

This group includes S.A. GEAR 91202, S.A. GEAR 91203 and CLOYES 96078 and the remaining parts above.

This table covers the camshafts that open the valves. Read more

5 Camshaft parts for the 2018 Jeep Cherokee come from MOPAR.

Part numbers include MOPAR 5047337AI, MOPAR 68088712AC and MOPAR 68088713AC, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2018 Jeep Cherokee — ELRING 127610.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 2018 Jeep Cherokee — MOPAR 6509128AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts for the 2018 Jeep Cherokee come from 5 brands — AJUSA, MAHLE / CLEVITE, FEL-PRO and 2 other brands. The "Popular" part is FEL-PRO CS26743.

Part numbers include FEL-PRO CS26743, AJUSA 54230400 and AJUSA 54231100, among others listed above.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 2018 Jeep Cherokee come from MOPAR.

Listed part numbers: MOPAR 5047374AC and MOPAR 68088026AD.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

MOPAR supplies the 12 Crankshaft Main Bearing parts for the 2018 Jeep Cherokee. MOPAR 68038560AA carries the "Popular" badge.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 2018 Jeep Cherokee, from WJB / INMOTION PARTS, BCA and NATIONAL.

Part numbers include BCA NS99166, BCA NS99177 and NATIONAL 99166, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

38 Crankshaft Seal parts are listed for the 2018 Jeep Cherokee, from VICTOR REINZ, AJUSA, NATIONAL and 12 other brands. AJUSA 15052700 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the cylinder heads that close the top of the block. Read more

One part is listed for the 2018 Jeep Cherokee — MOPAR 5048506AA.

This table covers the Cylinder Head Alignment Dowel pins. Read more

This group shows a single part: MOPAR 6100997.

This table covers the bolts that clamp the cylinder head to the block. Read more

11 Cylinder Head Bolt parts for the 2018 Jeep Cherokee come from 8 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 5 other brands. The "Popular" part is FEL-PRO ES72267.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Cylinder Head Gasket parts for the 2018 Jeep Cherokee come from 5 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is APEX AHG1352.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts for the 2018 Jeep Cherokee come from 5 brands — AJUSA, MAHLE / CLEVITE, MOPAR and 2 other brands. The "Popular" part is ULTRA-POWER HS55384.

Part numbers include ULTRA-POWER HS55384, AJUSA 52440200 and AJUSA 52440100, among others listed above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

MOPAR supplies both parts for the 2018 Jeep Cherokee.

Listed part numbers: MOPAR 4884892AA and MOPAR 4556020AB.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

5 Engine Block Heater parts are listed for the 2018 Jeep Cherokee, from KAT'S HEATERS and MOPAR. 2 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: KAT'S HEATERS 11812, KAT'S HEATERS 28812 and KAT'S HEATERS 11814, plus the other parts above.

This table covers the Engine covers. Read more

10 Engine Cover parts for the 2018 Jeep Cherokee come from 3 brands — MOPAR, TECHPRO and VARIOUS MFR. The "Popular" part is MOPAR 4627875AG. 5 parts fit every engine; the other 5 are engine-specific.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2018 Jeep Cherokee come from AJUSA.

Part numbers include AJUSA 50402300 and AJUSA 50402900.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

10 Exhaust Valve parts are listed for the 2018 Jeep Cherokee, from MELLING, MOPAR, QUALCAST and 3 other brands. MELLING V3402 carries the "Popular" badge.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

4 Expansion Plug parts for the 2018 Jeep Cherokee come from MOPAR.

This group includes MOPAR 6509900AA, MOPAR 6510012AA and MOPAR 68060349AA and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

13 Harmonic Balancer parts for the 2018 Jeep Cherokee come from 6 brands — ATP, SKP, DORMAN and 3 other brands. The "Popular" part is SKP SK594341.

The Economy section lists 2 options from SKP — the catalog's value-priced group. SKP SK594341 is listed in this group.

In the Standard Replacement grade, ATP, DORMAN, DAYCO and 2 other brands supply 11 parts: built to original-equipment specification. A representative part number is ATP 102343.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

7 Intake Manifold parts are listed for the 2018 Jeep Cherokee, from MOPAR, AUTOTECNICA, DORMAN and 2 other brands. AUTOTECNICA CY1418959 carries the "Popular" badge.

Part numbers include AUTOTECNICA CY1418959, DORMAN 615914 and MOPAR 5047441AN, among others listed above.

This table covers the Intake Manifold bolts. Read more

This group shows a single part: DORMAN 32128.

This table covers the Intake Manifold covers. Read more

This group shows a single part: MOPAR 4627315AD.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

15 Intake Manifold Gasket parts for the 2018 Jeep Cherokee come from 8 brands — MAHLE / CLEVITE, FEL-PRO, AJUSA and 5 other brands. The "Popular" part is FEL-PRO MS97204.

The Economy section: 1 option from SKP. SKP SK615918 is listed in this group.

Standard Replacement: 7 parts, from MAHLE / CLEVITE, FEL-PRO, AJUSA and 3 other brands. A representative part number is FEL-PRO MS97204.

7 further parts sit outside the graded sections, with the same engine-level match.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts are listed for the 2018 Jeep Cherokee, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO MS97205 carries the "Popular" badge.

This group includes FEL-PRO MS97205, AJUSA 77083200 and APEX AMS13120 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 2018 Jeep Cherokee, from MOPAR, MELLING, QUALCAST and 1 other brand.

This group includes MELLING V3401, MOPAR 5047446AA and MOPAR 68088019AA and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

14 Motor Mount parts are listed for the 2018 Jeep Cherokee, from ANCHOR, DEA / MARMON RIDE CONTROL, MOPAR and 3 other brands. ANCHOR 3580 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM3378.

The Standard Replacement section: 7 options from ANCHOR, DEA / MARMON RIDE CONTROL, MOPAR and 1 other brand. ANCHOR 3580 is listed in this group.

6 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

MOPAR supplies both parts for the 2018 Jeep Cherokee.

Part numbers include MOPAR 68172353AD and MOPAR 68136835AB.

This table covers the isolators in an engine mount. Read more

This group shows a single part: MOPAR 68192832AD.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2018 Jeep Cherokee.

This group includes ANCHOR 300376 and ANCHOR 300176.