This page lists 90 wheel parts for the 2018 Jeep Wrangler, across 17 part types, covering both the 2.0L L4 Turbocharged and the 3.6L V6. Every part shows its brand, manufacturer part number and fitment notes.
On the 2018 Jeep Wrangler, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. Most of the listed parts are Lug Nut (13 parts), Tire Pressure Monitoring System (TPMS) Stem / Service Kit (11 parts) and Wheel Center Cap (10 parts). The other 14 part types cover the remaining 56 parts.
The 2018 Jeep Wrangler was sold with both the 2.0L L4 Turbocharged and the 3.6L V6. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
11 brands supply wheel parts for the 2018 Jeep Wrangler, led by MOPAR (38 parts), DORMAN (16 parts) and MCGARD (13 parts), plus 8 more brands. Quality grades include Daily Driver, Valve Stem Assembly and Alloy / Aluminum - OEM Style.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2018 Jeep Wrangler. 13 parts have it, including DORMAN 611330 (Lug Nut) and MCGARD 65515 (Lug Nut & Lock Kit). Each part number opens a page with every vehicle that part fits.
Lug Nut
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.6L V6 | 611330 | 🇺🇸 US 🇨🇦 CA | Closed EndSteel | View on Amazon |
| DORMAN Fits: 3.6L V6 | 711606 | 🇺🇸 US 🇨🇦 CA | Open EndSteel | View on Amazon |
| DORMAN Fits: 3.6L V6 | 713685 | 🇺🇸 US 🇨🇦 CA | Open EndCarbon Steel | View on Amazon |
| DORMAN Fits: 3.6L V6 | 711604 | 🇺🇸 US 🇨🇦 CA | Closed EndSteel | View on Amazon |
| DORMAN Fits: 3.6L V6 | 7126005 | 🇺🇸 US 🇨🇦 CA | Closed EndSteel | View on Amazon |
| DORMAN Fits: 3.6L V6 | 7126055 | 🇺🇸 US 🇨🇦 CA | Closed EndSteel | View on Amazon |
| DORMAN Fits: 3.6L V6 | 611187 | 🇺🇸 US 🇨🇦 CA | Closed EndSteel | View on Amazon |
| MOPAR Fits: 3.6L V6 | 6036310AA | 🇺🇸 US 🇨🇦 CA | .50x20 | View on Amazon |
| MOPAR Fits: 3.6L V6 | 82216113AA | 🇺🇸 US 🇨🇦 CA | BlackBlack Lug Nut Kit comes with a Set of four Lug nuts. For a vehicle with a five Lug Nut pattern, must order 5 kits. For a vehicle with six Lug Nut pattern, must order six kits. | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PTC Popular Fits: 3.6L V6 | 98287 | 🇺🇸 US 🇨🇦 CA | M14-1.50 Capped | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD Popular Fits: 3.6L V6 | 64073 | 🇺🇸 US 🇨🇦 CA | Bulge Cone Seat Style Lug Nuts | View on Amazon |
| MCGARD Fits: 3.6L V6 | 64069 | 🇺🇸 US 🇨🇦 CA | Cone Seat Style Lug Nuts | View on Amazon |
| MCGARD Fits: 3.6L V6 | 65315 | 🇺🇸 US 🇨🇦 CA | Tuner Style Cone Seat Lug Nuts | View on Amazon |
This table covers the lug nuts that hold each wheel on the hub.
13 Lug Nut parts are listed for the 2018 Jeep Wrangler, from DORMAN, MCGARD, MOPAR and 1 other brand. DORMAN 611330 carries the "Popular" badge.
The Daily Driver section lists 9 options from DORMAN and MOPAR — grouped for everyday commuting duty. DORMAN 611330 is listed in this group.
In the Economy grade, PTC supplies 1 part: the catalog's value-priced group. A representative part number is PTC 98287.
The Premium section lists 3 options from MCGARD — a step above OE specification in materials, tolerances or warranty terms. MCGARD 64073 is listed in this group.
Lug Nut & Lock Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD Popular Fits: 3.6L V6 | 65515 | 🇺🇸 US 🇨🇦 CA | Tuner Style Cone Seat Wheel Installation Kit(16 Lug Nuts / 1 Installation Tool / 4 Wheel Locks / 1 Key / 1 Key Pouch) | View on Amazon |
| MCGARD Fits: 3.6L V6 | 65585 | 🇺🇸 US 🇨🇦 CA | Tuner Style Cone Seat 23-Piece Wheel Installation Kit(18 Lug Nuts / 1 Installation Tool / 5 Wheel Locks / 1 Key / 1 Key Pouch) | View on Amazon |
| MCGARD Fits: 3.6L V6 | 69476 | 🇺🇸 US 🇨🇦 CA | M14 X 1.5 Chrome Cone Seat Exposed Style Wheel Installation Kit1.66 OAL | View on Amazon |
| MCGARD Fits: 3.6L V6 | 69478 | 🇺🇸 US 🇨🇦 CA | with 5 Lug WheelsBlack | View on Amazon |
| MCGARD Fits: 3.6L V6 | 84525 | 🇺🇸 US 🇨🇦 CA | Cone Seat Exposed Style Wheel Installation Kit(16 Lug Nuts / 4 Wheel Locks / 1 Key / 1 Key Pouch) | View on Amazon |
| MCGARD Fits: 3.6L V6 | 84585 | 🇺🇸 US 🇨🇦 CA | Cone Seat Exposed Style Wheel 23-Piece Installation Kit(18 Lug Nuts / 5 Wheel Locks / 1 Key / 1 Key Pouch) | View on Amazon |
This table covers the Lug Nut & Lock kits.
6 Lug Nut & Lock Kit parts for the 2018 Jeep Wrangler come from MCGARD. The "Popular" part is MCGARD 65515.
This group includes MCGARD 65515, MCGARD 65585 and MCGARD 69476 and the remaining parts above.
Lug Nut Installation Tool / Key
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD Fits: 3.6L V6 | 65302 | 🇺🇸 US 🇨🇦 CA | Tuner Style Lug Installation Tool-with M14 Tuner Lugs- 22mm Hex | View on Amazon |
This table covers the keys used to install locking lug nuts.
One part is listed for the 2018 Jeep Wrangler — MCGARD 65302.
Lug Nut Lock
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.6L V6 | 712628 | 🇺🇸 US 🇨🇦 CA | ChromeThread Size: M14-1.50 | View on Amazon |
| DORMAN Popular Fits: 3.6L V6 | 711656 | 🇺🇸 US 🇨🇦 CA | BlackCarbon Steel | View on Amazon |
| DORMAN Fits: 3.6L V6 | 712681 | 🇺🇸 US 🇨🇦 CA | ChromeThread Size: M14-1.50 | View on Amazon |
| DORMAN Fits: 3.6L V6 | 711621 | 🇺🇸 US 🇨🇦 CA | ChromeThread Size: M14-1.50 | View on Amazon |
| DORMAN Fits: 3.6L V6 | 711624 | 🇺🇸 US 🇨🇦 CA | ChromeThread Size: M14-1.50 | View on Amazon |
| MOPAR Fits: 3.6L V6 | 82215711 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD Fits: 3.6L V6 | 24215 | 🇺🇸 US 🇨🇦 CA | Cone Seat Exposed Style Wheel Locks(4 Locks / 1 Key) | View on Amazon |
| MCGARD Fits: 3.6L V6 | 24515 | 🇺🇸 US 🇨🇦 CA | Cone Seat Exposed Style Wheel Locks- 5 Lock Set(5 Locks / 1 Key) | View on Amazon |
| MCGARD Fits: 3.6L V6 | 25115 | 🇺🇸 US 🇨🇦 CA | Tuner Style Cone Seat Wheel Locks | View on Amazon |
This table covers the locking lug nuts and keys.
9 Lug Nut Lock parts for the 2018 Jeep Wrangler come from 3 brands — DORMAN, MCGARD and MOPAR. The "Popular" part is DORMAN 712628.
Daily Driver: 6 parts, from DORMAN and MOPAR. A representative part number is DORMAN 712628.
Premium: 3 parts, from MCGARD. A representative part number is MCGARD 24215.
Listed part numbers: DORMAN 712628, DORMAN 711656 and DORMAN 712681, plus the other parts above.
Lug Stud
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: 3.6L V6 | 2004789 | 🇺🇸 US 🇨🇦 CA | Spicer | View on Amazon |
| DORMAN Fits: 3.6L V6 | 610637 | 🇺🇸 US 🇨🇦 CA | Thread Size: M14-1.50 | View on Amazon |
| DORMAN Fits: 3.6L V6 | 610638 | 🇺🇸 US 🇨🇦 CA | Thread Size: M14-1.50 | View on Amazon |
This table covers the Lug studs.
3 Lug Stud parts for the 2018 Jeep Wrangler come from 2 brands — DORMAN and DANA.
Listed part numbers: DANA 2004789, DORMAN 610637 and DORMAN 610638.
Spare Tire Bracket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6 | 55397217AC | 🇺🇸 US 🇨🇦 CA | Fits 2 Door4WD | View on Amazon |
| WESTIN Fits: 3.6L V6 | 5989005 | 🇺🇸 US 🇨🇦 CA | WJ2 Spare Tire RelocatorTextured Black | View on Amazon |
This table covers the brackets that mount the Spare Tire. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.
2 Spare Tire Bracket parts are listed for the 2018 Jeep Wrangler, from MOPAR and WESTIN.
This group includes MOPAR 55397217AC and WESTIN 5989005.
Spare Tire Carrier
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARIES Fits: 3.6L V6 | 2563000 | 🇺🇸 US | Unlimited MoabMounts Oversized Tire Up To 37 in. diam. | View on Amazon |
| ARIES Fits: 3.6L V6 | 2563001 | 🇺🇸 US 🇨🇦 CA | Rubicon or Sport or Sport S or Unlimited Rubicon or Unlimited Sahara or Unlimited Sport or Unlimited Sport SMounts Oversized Tire up To 37 In. Diameter | View on Amazon |
| ARIES Fits: 3.6L V6 | 25630AB | 🇺🇸 US | Tire Relocation Carrier Kit | View on Amazon |
| WESTIN Fits: 3.6L V6 | 5982035B | 🇺🇸 US 🇨🇦 CA | Tire CarrierTextured Black | View on Amazon |
This table covers the Spare Tire carriers.
4 Spare Tire Carrier parts are listed for the 2018 Jeep Wrangler, from ARIES and WESTIN.
This group includes ARIES 2563000, ARIES 2563001 and ARIES 25630AB and the remaining parts above.
Spare Tire Carrier Bumper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENERGY SUSPENSION Fits: 3.6L V6 | 29105G | 🇺🇸 US | Tailgate Spare Tire Bumper Set | View on Amazon |
This table covers the Spare Tire Carrier bumpers.
This group shows a single part: ENERGY SUSPENSION 29105G.
Spare Tire Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Popular Fits: 3.6L V6 | 82215440AB | 🇺🇸 US 🇨🇦 CA | Spare Tire Cover For 32 tires. Cover is made of Black Vinyl and features a camping-themed image. it fits 245/75R17 and 255/70R18 tires and is compatible with rear view camera. | View on Amazon |
| MOPAR Popular Fits: 3.6L V6 | 82215432AB | 🇺🇸 US 🇨🇦 CA | Spare Tire Cover For 32 tires. Cover is made of Black vinyl and features The Willys logo | View on Amazon |
| MOPAR Fits: 3.6L V6 | 82215434AB | 🇺🇸 US 🇨🇦 CA | Spare Tire Cover For 32 tires. Cover is made of Black Vinyl and features The Jeep logo In gray. it fits 245/75R17 and 255/70R18 tires and is compatible with rear view camera. | View on Amazon |
| MOPAR Fits: 3.6L V6 | 82215432 | 🇺🇸 US 🇨🇦 CA | Spare Tire Cover For 32 tires. Cover is made of Black vinyl and features The Army MEN design | View on Amazon |
| MOPAR Fits: 3.6L V6 | 82215439 | 🇺🇸 US 🇨🇦 CA | Spare Tire Cover For 32 tires. Cover is made of Black Vinyl and features The American Flag. it fits 245/75R17 and 255/70R18 tires and is compatible with rear view camera. | View on Amazon |
| MOPAR Fits: 3.6L V6 | 82215441 | 🇺🇸 US 🇨🇦 CA | Spare Tire Cover for 32" tiresBlack Vinyl With a desert-themed Logo | View on Amazon |
| MOPAR Fits: 3.6L V6 | 82215444 | 🇺🇸 US 🇨🇦 CA | Spare Tire Cover For 32 tires. Cover is made of Black vinyl and features The Black Wrangler logo | View on Amazon |
| MOPAR Fits: 3.6L V6 | 82215444AB | 🇺🇸 US 🇨🇦 CA | Spare Tire Cover For 32 tires. Cover is made of Black vinyl and features The Black Wrangler logo | View on Amazon |
This table covers the Spare Tire covers.
8 Spare Tire Cover parts for the 2018 Jeep Wrangler come from MOPAR. The "Popular" part is MOPAR 82215440AB.
Listed part numbers: MOPAR 82215440AB, MOPAR 82215432AB and MOPAR 82215434AB, plus the other parts above.
Tire Pressure Monitoring System (TPMS) Control Unit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6 | 68410628AE | 🇺🇸 US 🇨🇦 CA | Fits Tire Pressure Monitoring Display2 Door | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68214825AD | 🇺🇸 US 🇨🇦 CA | Fits Tire Pressure Monitoring Warning Lamp or Tire Pressure Monitoring Display2 Door or Tire Pressure Monitoring Warning Lamp or Tire Pressure Monitoring Display | View on Amazon |
| MOPAR Fits: 3.6L V6 | 68260735AC | 🇺🇸 US 🇨🇦 CA | Fits Tire Pressure Monitoring Display2 Door | View on Amazon |
This table covers the control units that read the TPMS sensors.
3 Tire Pressure Monitoring System (TPMS) Control Unit parts for the 2018 Jeep Wrangler come from MOPAR.
Part numbers include MOPAR 68410628AE, MOPAR 68214825AD and MOPAR 68260735AC.
Tire Pressure Monitoring System (TPMS) Sensor
Aftermarket / Multi-Application (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.6L V6 | 974043 | 🇺🇸 US 🇨🇦 CA | Sensor Style: Stem / Torque Spec: Inch Lbs. 35 / Torque Spec: Nm 4 | View on Amazon |
OE Replacement (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS Fits: 3.6L V6 | RDE036V21 | 🇺🇸 US 🇨🇦 CA | OE Quality 433MHZ Replacement SensorIncludes RDV021 Silver 43mm Metal Valve | View on Amazon |
| SCHRADER Fits: 3.6L V6 | 29093 | 🇺🇸 US 🇨🇦 CA | ProgrammedIncludes Mounting Hardware | View on Amazon |
Premium (Programmed + Clone Capable)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6 | TPM197RA | 🇺🇸 US 🇨🇦 CA | Programmed | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
4 Tire Pressure Monitoring System (TPMS) Sensor parts are listed for the 2018 Jeep Wrangler, from DORMAN, BH SENS, SCHRADER and 1 other brand.
In the Aftermarket / Multi-Application (Programmed) grade, DORMAN supplies 1 part: grouped under the catalog's "Aftermarket / Multi-Application (Programmed)" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 974043.
The OE Replacement (Programmed) section lists 2 options from BH SENS and SCHRADER — manufactured to match the original-equipment part in form, fit and function. BH SENS RDE036V21 is listed in this group.
In the Premium (Programmed + Clone Capable) grade, STANDARD MOTOR PRODUCTS supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is STANDARD MOTOR PRODUCTS TPM197RA.
This group includes DORMAN 974043, BH SENS RDE036V21 and SCHRADER 29093 and the remaining parts above.
Tire Pressure Monitoring System (TPMS) Sensor Retrofit Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER Fits: 3.6L V6 | 295002 | 🇺🇸 US 🇨🇦 CA | Schrader TPMS Retrofit Kit For trailers, Tow behind campers, and RVSPack of 2 | View on Amazon |
This table covers the Tire Pressure Monitoring System (TPMS) Sensor Retrofit kits.
This group shows a single part: SCHRADER 295002.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
Hardware Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 3.6L V6 | TPM4012SK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor Service KitSold Individually | View on Amazon |
Valve Stem Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER Popular Fits: 3.6L V6 | 20018 | 🇺🇸 US 🇨🇦 CA | Rubber Valve Stem Assembly | View on Amazon |
| STANDARD MOTOR PRODUCTS Popular Fits: 3.6L V6 | TPM2011VK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor ValveSold Individually | View on Amazon |
| BH SENS Fits: 3.6L V6 | RDV043 | 🇺🇸 US 🇨🇦 CA | RubberStraight-In Screw | View on Amazon |
| BH SENS Fits: 3.6L V6 | RDV036 | 🇺🇸 US 🇨🇦 CA | Fixed Angle MetalSilver 43mm | View on Amazon |
| BH SENS Fits: 3.6L V6 | RDV037 | 🇺🇸 US 🇨🇦 CA | Fixed Angle MetalBlack 43mm | View on Amazon |
| BH SENS Fits: 3.6L V6 | RDV038 | 🇺🇸 US 🇨🇦 CA | Fixed Angle MetalTitanium 43mm | View on Amazon |
| DORMAN Fits: 3.6L V6 | 974300 | 🇺🇸 US 🇨🇦 CA | Fits only Dorman Programmable Universal MULTI-FIT TPMS Sensors | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6 | TPM2012VK | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6 | TPM2012VBK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor Valve | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6 | TPM2012VCK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor Valve | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
11 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts for the 2018 Jeep Wrangler come from 4 brands — STANDARD MOTOR PRODUCTS, BH SENS, SCHRADER and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS TPM4012SK.
The Hardware Only section lists 1 option from STANDARD MOTOR PRODUCTS — grouped under the catalog's "Hardware Only" designation — the notes column spells out what sets them apart. STANDARD MOTOR PRODUCTS TPM4012SK is listed in this group.
In the Valve Stem Assembly grade, STANDARD MOTOR PRODUCTS, BH SENS, SCHRADER and 1 other brand supply 10 parts: grouped under the catalog's "Valve Stem Assembly" designation — the notes column spells out what sets them apart. A representative part number is SCHRADER 20018.
Tire Sealant
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6 | 68400709AA | 🇺🇸 US 🇨🇦 CA | Fits Component Of 82212850 | View on Amazon |
This table covers the sealants used in a tire or TPMS kit.
This group shows a single part: MOPAR 68400709AA.
Valve Stem Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6 | 82214622 | 🇺🇸 US 🇨🇦 CA | Valve Stem Caps Add that little extra style To your vehicle. These Black caps come In a Set of four and feature The Jeep logo In Black On a silver background. They Are made of ABS plastic with o-ring seal. | View on Amazon |
| MOPAR Fits: 3.6L V6 | 82213628AB | 🇺🇸 US 🇨🇦 CA | Valve Stem Caps Add that little extra style To your vehicle. These Silver caps come In a Set of four and feature The Jeep logo. They Are made of ABS plastic with o-ring seal. | View on Amazon |
| MOPAR Fits: 3.6L V6 | 82215721 | 🇺🇸 US 🇨🇦 CA | Black Valve Stem Caps White face and blue Mopar logo, Set of four | View on Amazon |
| SCHRADER Fits: 3.6L V6 | 20995 | 🇺🇸 US 🇨🇦 CA | Long CapAttachment: Snap-In | View on Amazon |
This table covers the protective dust caps for TPMS and standard valve stems. Typical signs include a missing cap, a slow TPMS leak, or grit packed in the stem. Use the cap type the notes call for — some TPMS stems need a specific seal under the cap.
4 Valve Stem Cap parts are listed for the 2018 Jeep Wrangler, from MOPAR and SCHRADER.
Listed part numbers: MOPAR 82214622, MOPAR 82213628AB and MOPAR 82215721, plus the other parts above.
Wheel
Alloy / Aluminum - OEM Style
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6 | 5VH23GSAAA | 🇺🇸 US 🇨🇦 CA | Aluminum | View on Amazon |
| MOPAR Fits: 3.6L V6 | 6BZ392XFAB | 🇺🇸 US 🇨🇦 CA | Aluminum | View on Amazon |
| MOPAR Fits: 3.6L V6 | 6BZ391XFAB | 🇺🇸 US 🇨🇦 CA | Aluminum | View on Amazon |
| MOPAR Fits: 3.6L V6 | 6BZ411STAA | 🇺🇸 US 🇨🇦 CA | Aluminum | View on Amazon |
| MOPAR Fits: 3.6L V6 | 1JC34PAKAB | 🇺🇸 US 🇨🇦 CA | Aluminum | View on Amazon |
| MOPAR Fits: 3.6L V6 | 1TK93AAAAC | 🇺🇸 US 🇨🇦 CA | Aluminum | View on Amazon |
| MOPAR Fits: 3.6L V6 | 1TK93NTZAC | 🇺🇸 US 🇨🇦 CA | Aluminum | View on Amazon |
Steel - OEM Style
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Fits: 3.6L V6 | 1AH73RXFAD | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| MOPAR Fits: 3.6L V6 | 1AH73S4AAD | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
This table covers the wheels listed for this hub.
MOPAR supplies the 9 Wheel parts for the 2018 Jeep Wrangler.
The Alloy / Aluminum - OEM Style section lists 7 options from MOPAR — grouped under the catalog's "Alloy / Aluminum - OEM Style" designation — the notes column spells out what sets them apart. MOPAR 5VH23GSAAA is listed in this group.
In the Steel - OEM Style grade, MOPAR supplies 2 parts: grouped under the catalog's "Steel - OEM Style" designation — the notes column spells out what sets them apart. A representative part number is MOPAR 1AH73RXFAD.
Listed part numbers: MOPAR 5VH23GSAAA, MOPAR 6BZ392XFAB and MOPAR 6BZ391XFAB, plus the other parts above.
Wheel Center Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOPAR Popular Fits: 3.6L V6 | 52090402AA | 🇺🇸 US 🇨🇦 CA | OE New | View on Amazon |
| MOPAR Popular Fits: 3.6L V6 | 1LB77DD5AC | 🇺🇸 US 🇨🇦 CA | Satin Carbon Finish | View on Amazon |
| MOPAR Fits: 3.6L V6 | 1LB77GSAAC | 🇺🇸 US 🇨🇦 CA | OE New | View on Amazon |
| MOPAR Fits: 3.6L V6 | 1LB77MALAC | 🇺🇸 US 🇨🇦 CA | OE New | View on Amazon |
| MOPAR Fits: 3.6L V6 | 1LB77MA7AC | 🇺🇸 US 🇨🇦 CA | OE New | View on Amazon |
| MOPAR Fits: 3.6L V6 | 1LB77NTZAC | 🇺🇸 US 🇨🇦 CA | OE New | View on Amazon |
| MOPAR Fits: 3.6L V6 | 5XN15RXFAA | 🇺🇸 US 🇨🇦 CA | Matte Black | View on Amazon |
| MOPAR Fits: 3.6L V6 | 1LB77CDMAC | 🇺🇸 US 🇨🇦 CA | OE New | View on Amazon |
| MOPAR Fits: 3.6L V6 | 1LB77DX8AC | 🇺🇸 US 🇨🇦 CA | Gloss Black | View on Amazon |
| MOPAR Fits: 3.6L V6 | 5HT59PAKAB | 🇺🇸 US 🇨🇦 CA | OE New | View on Amazon |
This table covers the Wheel Center caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
10 Wheel Center Cap parts for the 2018 Jeep Wrangler come from MOPAR. The "Popular" part is MOPAR 52090402AA.
Buying Wheel Parts for a 2018 Jeep Wrangler
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Match the engine first. Every wheel part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Lug Nut and Tire Pressure Monitoring System (TPMS) Stem / Service Kit .
Frequently Asked Questions
How many wheel parts fit the 2018 Jeep Wrangler?
Our catalog currently lists 90 wheel parts for the 2018 Jeep Wrangler across 17 subcategories and 11 brands, covering both the 2.0L L4 Turbocharged and the 3.6L V6. Each part is matched to the engine(s) it fits.
Do wheel parts differ between 2018 Jeep Wrangler engines?
Yes. Every wheel part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of wheel problems on a 2018 Jeep Wrangler?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Jeep Wrangler was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Jeep Wrangler?
First match the engine — each row shows which engine(s) the part fits. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Jeep Wrangler
Wheel Parts for Other Jeep Wrangler Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.