45 Engine parts are listed for the 1964 Jensen C-V8, in 15 part types, covering the 6.3L V8 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The engine on the 1964 Jensen C-V8 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Valve Cover Gasket (7 parts), Intake Manifold Gasket (5 parts) and Oil Pan Gasket (5 parts). The other 12 part types cover the remaining 28 parts.
Every part on this page is matched to the 6.3L V8 — the only engine offered in the 1964 Jensen C-V8.
The most listed brands for 1964 Jensen C-V8 engine parts are MAHLE / CLEVITE (17 parts), VICTOR REINZ (15 parts) and FEL-PRO (13 parts). Quality grades include Premium and Standard Replacement.
4 parts on this 1964 Jensen C-V8 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including FEL-PRO MS90175 (Intake Manifold Gasket) and FEL-PRO OS11729C1 (Oil Pan Gasket). Click any part number to see every vehicle that part fits.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | BS40240 | 🇺🇸 US | Rubber | View on Amazon |
| MAHLE / CLEVITE | JV604 | 🇺🇸 US | SetMolded Rubber | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Crankshaft Seal parts are listed for the 1964 Jensen C-V8, from FEL-PRO and MAHLE / CLEVITE.
Listed part numbers: FEL-PRO BS40240 and MAHLE / CLEVITE JV604.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 8519PT1 | 🇺🇸 US | Permatorque | View on Amazon |
| MAHLE / CLEVITE | 3464VC | 🇺🇸 US | Graphite | View on Amazon |
| VICTOR REINZ | 611033200 | 🇺🇸 US | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Cylinder Head Gasket parts for the 1964 Jensen C-V8 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO 8519PT1, MAHLE / CLEVITE 3464VC and VICTOR REINZ 611033200.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | HS7891PT11 | 🇺🇸 US | Exhaust Manifold Gasket(s) Not IncludedIncludes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE | HS3464VC | 🇺🇸 US | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ | 021032301 | 🇺🇸 US | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts for the 1964 Jensen C-V8 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
This group includes FEL-PRO HS7891PT11, MAHLE / CLEVITE HS3464VC and VICTOR REINZ 021032301.
Cylinder Head Spacer Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 55153 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ | 711638300 | 🇺🇸 US | View on Amazon |
This table covers the Cylinder Head Spacer shims.
2 Cylinder Head Spacer Shim parts for the 1964 Jensen C-V8 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.
This group includes MAHLE / CLEVITE 55153 and VICTOR REINZ 711638300.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | FS7891PT11 | 🇺🇸 US | Overhaul SetDoes Not Include Intake Manifold Gaskets | View on Amazon |
| VICTOR REINZ | 011002401 | 🇺🇸 US | Gasket Set | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Engine Kit Gasket Set parts for the 1964 Jensen C-V8 come from 2 brands — FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO FS7891PT11 and VICTOR REINZ 011002401.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | MS90175 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO | MS96007 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE | MS15924 | 🇺🇸 US | Beaded Steel | View on Amazon |
| VICTOR REINZ | 111000501 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ | 101004301 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Manifold Gasket parts for the 1964 Jensen C-V8 come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO MS90175.
Listed part numbers: FEL-PRO MS90175, FEL-PRO MS96007 and MAHLE / CLEVITE MS15924, plus the other parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 70822 | 🇺🇸 US | 0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer | View on Amazon |
| MAHLE / CLEVITE | 2051 | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ | 711346200 | 🇺🇸 US | 0.500 IN Inside Diameter | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Drain Plug Gasket parts for the 1964 Jensen C-V8 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
This group includes FEL-PRO 70822, MAHLE / CLEVITE 2051 and VICTOR REINZ 711346200.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | OS11729C1 | 🇺🇸 US | High Performance engine with Windage tray requires 2 Oil Pan sets1 Piece Design | View on Amazon |
| MAHLE / CLEVITE | OS31416 | 🇺🇸 US | Cork-RubberOil Pan Gasket Material: Cork-Rubber | View on Amazon |
| MAHLE / CLEVITE | OS31416TC | 🇺🇸 US | Cork with Metal Carrier | View on Amazon |
| VICTOR REINZ | 101018801 | 🇺🇸 US | Cork Rubber | View on Amazon |
| VICTOR REINZ | 101001801 | 🇺🇸 US | Molded Rubber on Rigid Carrier | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Pan Gasket parts are listed for the 1964 Jensen C-V8, from MAHLE / CLEVITE, VICTOR REINZ and FEL-PRO. FEL-PRO OS11729C1 carries the "Popular" badge.
This group includes FEL-PRO OS11729C1, MAHLE / CLEVITE OS31416 and MAHLE / CLEVITE OS31416TC and the remaining parts above.
Oil Pressure Relief Valve Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 3122 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ | 711456300 | 🇺🇸 US | View on Amazon |
This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pressure Relief Valve Gasket parts for the 1964 Jensen C-V8 come from 2 brands — FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO 3122 and VICTOR REINZ 711456300.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | B45558 | 🇺🇸 US | Molded Rubber | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: MAHLE / CLEVITE B45558.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 40203CP | 🇺🇸 US | PremiumMaterial Cast Iron / Cast Iron / Stainless Steel | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 50203CP | 🇺🇸 US | SetChrome Facing | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
2 Piston Ring parts for the 1964 Jensen C-V8 come from MAHLE / CLEVITE.
In the Premium grade, MAHLE / CLEVITE supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 40203CP.
In the Standard Replacement grade, MAHLE / CLEVITE supplies 1 part: built to original-equipment specification. A representative part number is MAHLE / CLEVITE 50203CP.
Listed part numbers: MAHLE / CLEVITE 40203CP and MAHLE / CLEVITE 50203CP.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | TCS124602 | 🇺🇸 US | Water Pump Gasket Included | View on Amazon |
| MAHLE / CLEVITE | T18750 | 🇺🇸 US | Paper | View on Amazon |
| MAHLE / CLEVITE | JV834 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ | 151025001 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Timing Cover Gasket parts are listed for the 1964 Jensen C-V8, from MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO TCS124602, MAHLE / CLEVITE T18750 and MAHLE / CLEVITE JV834, among others listed above.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 64573 | 🇺🇸 US | Rubber | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 1964 Jensen C-V8 — MAHLE / CLEVITE 64573.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | VS13379 | 🇺🇸 US | Cork | View on Amazon |
| FEL-PRO Popular | VS50145R | 🇺🇸 US | High Temperature DesignRubber Coated Fiber | View on Amazon |
| MAHLE / CLEVITE | VS38322 | 🇺🇸 US | Cork-RubberSet | View on Amazon |
| MAHLE / CLEVITE | VS38322H | 🇺🇸 US | SetHigh Temperature Cork-Rubber | View on Amazon |
| VICTOR REINZ | 151052101 | 🇺🇸 US | Improved DesignSet | View on Amazon |
| VICTOR REINZ | 151059201 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ | 151052201 | 🇺🇸 US | SetHigh Temperature Design | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Valve Cover Gasket parts are listed for the 1964 Jensen C-V8, from VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE. FEL-PRO VS13379 carries the "Popular" badge.
Listed part numbers: FEL-PRO VS13379, FEL-PRO VS50145R and MAHLE / CLEVITE VS38322, plus the other parts above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | SS12419 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE | SS45343 | 🇺🇸 US | SetMolded Rubber | View on Amazon |
| VICTOR REINZ | 121007001 | 🇺🇸 US | SetContains 8 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Valve Stem Seal parts are listed for the 1964 Jensen C-V8, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO SS12419, MAHLE / CLEVITE SS45343 and VICTOR REINZ 121007001.
Buying Engine Parts for a 1964 Jensen C-V8
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 6.3L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Valve Cover Gasket and Intake Manifold Gasket .
Frequently Asked Questions
How many engine parts fit the 1964 Jensen C-V8?
Our catalog currently lists 45 engine parts for the 1964 Jensen C-V8 across 15 subcategories and 3 brands, covering the 6.3L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1964 Jensen C-V8?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1964 Jensen C-V8 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1964 Jensen C-V8?
Every part on this page is matched to the 6.3L V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1964 Jensen C-V8
Engine Parts for Other Jensen C-V8 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.