1966 Jensen C-V8 Drivetrain Parts

Engine:
6.3L V8

This page lists 7 drivetrain parts for the 1966 Jensen C-V8, across 1 part type, covering the 6.3L V8 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 1966 Jensen C-V8, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Every listed part is an Universal Joint.

Universal Joint

Economy

Brand Part Number Markets Notes Buy
DANA Popular 15178X
🇺🇸 US
SVLGreasable
Fitment notes — DANA 15178X
SVLGreasable1.188 IN Bearing Cap Diameter3.625in Outside Snap Ring Dimension
Fits:
Rear Driveshaft at Rear Axle
or:
Rear Driveshaft at Transmission
View on
Amazon
DANA 25178X
🇺🇸 US
Spicer SelectGreasable
Fitment notes — DANA 25178X
Spicer SelectGreasable3.625in Outside Snap Ring Dimension1.188 IN Bearing Cap Diameter
Fits:
Rear Driveshaft at Rear Axle
or:
Rear Driveshaft at Transmission
View on
Amazon

Heavy Duty

Brand Part Number Markets Notes Buy
DANA Popular 51350X
🇺🇸 US
Spicer Life Series (SPL)Non-Greasable
Fitment notes — DANA 51350X
Spicer Life Series (SPL)Non-Greasable1.188" Bearing CapOutside Snap Rings
Fits:
Rear Driveshaft At Rear AxleOE Design
or:
Rear Driveshaft At TransmissionOE Design
View on
Amazon
DANA 51350XP
🇺🇸 US
Spicer Life Series (SPL) PlusNon-Greasable
Fitment notes — DANA 51350XP
Spicer Life Series (SPL) PlusNon-GreasableHigh Temperature Design1.188" Bearing CapOutside Snap Rings
Fits:
Rear Driveshaft At Rear AxleEnhanced over OE Design
or:
Rear Driveshaft At TransmissionEnhanced over OE Design
View on
Amazon
DANA 513501X
🇺🇸 US
Spicer Life Series (SPL)Greasable
Fitment notes — DANA 513501X
Spicer Life Series (SPL)Greasable1.188" Bearing CapOutside Snap Rings
Fits:
Rear Driveshaft at Rear Axle
or:
Rear Driveshaft at Transmission
View on
Amazon
DANA SPL301350XC
🇺🇸 US
Spicer Life Series (SPL)Non-Greasable
Fitment notes — DANA SPL301350XC
Spicer Life Series (SPL)Non-GreasableBlue Coated Performance1.188" Bearing CapOutside Snap Rings
Fits:
Rear Driveshaft at Rear Axle
or:
Rear Driveshaft at Transmission
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
DANA 5178X
🇺🇸 US
SpicerGreasable
Fitment notes — DANA 5178X
SpicerGreasable3.625in Outside Snap Ring Dimension1.188 IN Bearing Cap Diameter
Fits:
Rear Driveshaft at Rear Axle
or:
Rear Driveshaft at Transmission
View on
Amazon

This table covers the U-joints in the driveshaft.

Buying Drivetrain Parts for a 1966 Jensen C-V8

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Confirm you have the 6.3L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Universal Joint .

Frequently Asked Questions

How many drivetrain parts fit the 1966 Jensen C-V8?

Our catalog currently lists 7 drivetrain parts for the 1966 Jensen C-V8 across 1 subcategory and 1 brand, covering the 6.3L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of drivetrain problems on a 1966 Jensen C-V8?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1966 Jensen C-V8 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1966 Jensen C-V8?

Every part on this page is matched to the 6.3L V8 engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1966 Jensen C-V8

Drivetrain Parts for Other Jensen C-V8 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.