30 Drivetrain parts are listed for the 1968 Jensen Interceptor, in 5 part types, covering the 6.3L V8 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1968 Jensen Interceptor, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are Differential Pinion Bearing / Race (11 parts), Universal Joint (7 parts) and Differential Carrier Bearing / Race (6 parts). The other 2 part types cover the remaining 6 parts.
The 1968 Jensen Interceptor came with a single engine, the 6.3L V8, and every part is verified against it.
5 brands supply drivetrain parts for the 1968 Jensen Interceptor, led by WJB / INMOTION PARTS (9 parts), BCA (8 parts) and DANA (7 parts), plus 2 more brands. Quality grades include Standard Replacement, Economy and Heavy Duty.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1968 Jensen Interceptor. 8 parts have it, including NATIONAL 25523 (Differential Carrier Bearing / Race) and NATIONAL 02820 (Differential Pinion Bearing / Race). Each part number opens a page with every vehicle that part fits.
Differential Carrier Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS | WT25523 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| WJB / INMOTION PARTS | WT25577 | 🇺🇸 US 🇨🇦 CA | Rearwith Salisbury 4HA Axle | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular | 25523 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| NATIONAL Popular | 25577 | 🇺🇸 US 🇨🇦 CA | Rearwith Salisbury 4HA Axle | View on Amazon |
| BCA | NB25523 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| BCA | NB25577 | 🇺🇸 US 🇨🇦 CA | Rearwith Salisbury 4HA Axle | View on Amazon |
This table covers the bearings and races that support the differential carrier.
6 Differential Carrier Bearing / Race parts are listed for the 1968 Jensen Interceptor, from WJB / INMOTION PARTS, NATIONAL and BCA. NATIONAL 25523 carries the "Popular" badge.
In the Economy grade, WJB / INMOTION PARTS supplies 2 parts: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WT25523.
The Standard Replacement section lists 4 options from NATIONAL and BCA — built to original-equipment specification. NATIONAL 25523 is listed in this group.
Part numbers include NATIONAL 25523, WJB / INMOTION PARTS WT25523 and WJB / INMOTION PARTS WT25577, among others listed above.
Differential Pinion Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS | WT02820 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| WJB / INMOTION PARTS | WT31520 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| WJB / INMOTION PARTS | WT02872 | 🇺🇸 US 🇨🇦 CA | Rear Outerwith Salisbury 4HA Axle | View on Amazon |
| WJB / INMOTION PARTS | WT31594 | 🇺🇸 US 🇨🇦 CA | Rear Innerwith Salisbury 4HA Axle | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular | 02820 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| NATIONAL Popular | 02872 | 🇺🇸 US 🇨🇦 CA | Rear Outerwith Salisbury 4HA Axle | View on Amazon |
| NATIONAL Popular | 31594 | 🇺🇸 US 🇨🇦 CA | Rear Innerwith Salisbury 4HA Axle | View on Amazon |
| BCA | NB02820 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| BCA | NB31520 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| BCA | NB02872 | 🇺🇸 US 🇨🇦 CA | Rear Outerwith Salisbury 4HA Axle(s) | View on Amazon |
| BCA | NB31594 | 🇺🇸 US 🇨🇦 CA | Rear Innerwith Salisbury 4HA Axle(s) | View on Amazon |
This table covers the bearings and races on the differential pinion.
11 Differential Pinion Bearing / Race parts for the 1968 Jensen Interceptor come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL. The "Popular" part is NATIONAL 02820.
The Economy section: 4 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WT02820 is listed in this group.
Standard Replacement: 7 parts, from BCA and NATIONAL. A representative part number is NATIONAL 02820.
Differential Pinion Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS | WS99155 | 🇺🇸 US 🇨🇦 CA | Rear Outerwith Salisbury 4HA Axle | View on Amazon |
This table covers the wear sleeves used to restore a grooved pinion seal surface.
One part is listed for the 1968 Jensen Interceptor — WJB / INMOTION PARTS WS99155.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular | WS5778 | 🇺🇸 US 🇨🇦 CA | Nitrile | View on Amazon |
| BCA | NS5778 | 🇺🇸 US 🇨🇦 CA | Nitrile | View on Amazon |
| BCA | NS5778V | 🇺🇸 US 🇨🇦 CA | Viton | View on Amazon |
| SCHAEFFLER | SS2633 | 🇺🇸 US 🇨🇦 CA | Rear16.891 mm Width | View on Amazon |
| WJB / INMOTION PARTS | WS5778V | 🇺🇸 US 🇨🇦 CA | Rear Outerwith Salisbury 4HA Axle | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Differential Pinion Seal parts are listed for the 1968 Jensen Interceptor, from WJB / INMOTION PARTS, BCA and SCHAEFFLER. WJB / INMOTION PARTS WS5778 carries the "Popular" badge.
Part numbers include WJB / INMOTION PARTS WS5778, BCA NS5778 and BCA NS5778V, among others listed above.
Universal Joint
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular | 15178X | 🇺🇸 US 🇨🇦 CA | SVLGreasable | View on Amazon |
| DANA | 25178X | 🇺🇸 US 🇨🇦 CA | Spicer SelectGreasable | View on Amazon |
Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular | 51350X | 🇺🇸 US 🇨🇦 CA | Spicer Life Series (SPL)Non-Greasable | View on Amazon |
| DANA | 51350XP | 🇺🇸 US 🇨🇦 CA | Spicer Life Series (SPL) PlusNon-Greasable | View on Amazon |
| DANA | 513501X | 🇺🇸 US 🇨🇦 CA | Spicer Life Series (SPL)Greasable | View on Amazon |
| DANA | SPL301350XC | 🇺🇸 US 🇨🇦 CA | Spicer Life Series (SPL)Non-Greasable | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA | 5178X | 🇺🇸 US 🇨🇦 CA | SpicerGreasable | View on Amazon |
This table covers the U-joints in the driveshaft.
DANA supplies the 7 Universal Joint parts for the 1968 Jensen Interceptor. DANA 15178X carries the "Popular" badge.
Economy: 2 parts, from DANA. A representative part number is DANA 15178X.
The Heavy Duty section lists 4 options from DANA — rated for severe service. DANA 51350X is listed in this group.
The Standard Replacement section: 1 option from DANA. DANA 5178X is listed in this group.
Part numbers include DANA 15178X, DANA 25178X and DANA 51350X, among others listed above.
Buying Drivetrain Parts for a 1968 Jensen Interceptor
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Confirm you have the 6.3L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Differential Pinion Bearing / Race and Universal Joint .
Frequently Asked Questions
How many drivetrain parts fit the 1968 Jensen Interceptor?
Our catalog currently lists 30 drivetrain parts for the 1968 Jensen Interceptor across 5 subcategories and 5 brands, covering the 6.3L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of drivetrain problems on a 1968 Jensen Interceptor?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Jensen Interceptor was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1968 Jensen Interceptor?
Every part on this page is matched to the 6.3L V8 engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1968 Jensen Interceptor
Drivetrain Parts for Other Jensen Interceptor Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.