This page lists 5 engine parts for the 2000 Kenworth T300, across 1 part type, covering all 3 engine options (5.9L L6 DIESEL Turbocharged, 7.2L L6 DIESEL Turbocharged and 8.3L L6 DIESEL Turbocharged). Every part shows its brand, manufacturer part number and fitment notes.
The engine on the 2000 Kenworth T300 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Every listed part is an Oil Filter.
The 2000 Kenworth T300 was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
Every engine part listed for the 2000 Kenworth T300 comes from CHAMP / LUBER-FINER. Quality grades include Economy and Standard Replacement.
Each part number listed for the 2000 Kenworth T300 opens a page with every vehicle that part fits.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMP / LUBER-FINER Fits: 7.2L L6 DIESEL Turbocharged | LFP3191 | 🇺🇸 US 🇨🇦 CA | Fits Standard versionor T300 with Cat 3126 Engine | View on Amazon |
| CHAMP / LUBER-FINER Fits: 8.3L L6 DIESEL Turbocharged | LFP3000 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMP / LUBER-FINER Fits: 7.2L L6 DIESEL Turbocharged | LFP3191XL | 🇺🇸 US 🇨🇦 CA | XL Synthetic | View on Amazon |
| CHAMP / LUBER-FINER Fits: 8.3L L6 DIESEL Turbocharged | LFP3000XL | 🇺🇸 US 🇨🇦 CA | Spin-OnXL Synthetic | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMP / LUBER-FINER Fits: 5.9L L6 DIESEL Turbocharged | LFP3970 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
CHAMP / LUBER-FINER supplies the 5 Oil Filter parts for the 2000 Kenworth T300.
In the Economy grade, CHAMP / LUBER-FINER supplies 2 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER LFP3191.
The Standard Replacement section lists 2 options from CHAMP / LUBER-FINER — built to original-equipment specification. CHAMP / LUBER-FINER LFP3191XL is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
Part numbers include CHAMP / LUBER-FINER LFP3191, CHAMP / LUBER-FINER LFP3000 and CHAMP / LUBER-FINER LFP3191XL, among others listed above.
Buying Engine Parts for a 2000 Kenworth T300
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2000 Kenworth T300?
Our catalog currently lists 5 engine parts for the 2000 Kenworth T300 across 1 subcategory and 1 brand, covering all 3 engine options (5.9L L6 DIESEL Turbocharged, 7.2L L6 DIESEL Turbocharged and 8.3L L6 DIESEL Turbocharged). Each part is matched to the engine(s) it fits.
Do engine parts differ between 2000 Kenworth T300 engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2000 Kenworth T300?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2000 Kenworth T300 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2000 Kenworth T300?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2000 Kenworth T300
Engine Parts for Other Kenworth T300 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.