1995 Kia Sephia Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

17 Coolant / Antifreeze parts are listed for the 1995 Kia Sephia, from PRESTONE, PEAK, VALVOLINE and 3 other brands. FVP MV5050GAL carries the "Popular" badge.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PEAK, PRESTONE and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Premium section lists 5 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 7 options from VALVOLINE, BECK/ARNLEY, AISIN and 1 other brand — built to original-equipment specification. VALVOLINE ZXEL1 is listed in this group.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Coolant Hose / Pipe Seal parts for the 1995 Kia Sephia come from 3 brands — APEX, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: APEX AWO2403, FEL-PRO 36103 and MAHLE / CLEVITE C33469.

This table covers the Cooling Fan control modules. Read more

2 Cooling Fan Control Module parts for the 1995 Kia Sephia come from US MOTOR WORKS.

This group includes US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

4 Cooling System Tester Adapter parts are listed for the 1995 Kia Sephia, from MOTORAD, GATES and STANT.

Part numbers include GATES 31428, MOTORAD 3121 and MOTORAD 3122, among others listed above.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

6 Radiator parts are listed for the 1995 Kia Sephia, from ULTRA-POWER, VALEO, AGILITY and 3 other brands. ULTRA-POWER 2056 carries the "Popular" badge.

Economy: 1 part, from ULTRA-POWER. A representative part number is ULTRA-POWER 2056.

The Standard Replacement section: 5 options from VALEO, AGILITY, NISSENS and 2 other brands. VALEO 734264 is listed in this group.

Listed part numbers: ULTRA-POWER 2056, VALEO 734264 and AGILITY 8012056, plus the other parts above.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

8 Radiator Cap parts are listed for the 1995 Kia Sephia, from GATES, MOTORAD, CALORSTAT and 3 other brands. CSF 4502 carries the "Popular" badge.

The Locking Replacement section lists 3 options from CALORSTAT, GATES and MOTORAD — grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. CALORSTAT RC0213 is listed in this group.

The Standard Replacement section: 5 options from CSF, MOTORAD, DORMAN and 2 other brands. CSF 4502 is listed in this group.

Part numbers include CSF 4502, CALORSTAT RC0213 and GATES 31533, among others listed above.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

3 Radiator Fan Assembly parts for the 1995 Kia Sephia come from 3 brands — TECHPRO, UAC and VDO / CONTINENTAL.

The Economy section: 1 option from TECHPRO. TECHPRO KI3115103 is listed in this group.

Standard Replacement: 2 parts, from UAC and VDO / CONTINENTAL. A representative part number is UAC FA51154C.

Listed part numbers: TECHPRO KI3115103, UAC FA51154C and VDO / CONTINENTAL FA70650.

This table covers the Radiator Fan motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

One part is listed for the 1995 Kia Sephia — AUTO 7 3150037.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

8 Radiator Hose parts for the 1995 Kia Sephia come from 4 brands — DAYCO, ACDELCO, CONTINENTAL and 1 other brand. The "Popular" part is DAYCO 71485.

Part numbers include DAYCO 71485, DAYCO 71486 and ACDELCO 20249S, among others listed above.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

28 Temperature Sender / Sensor parts are listed for the 1995 Kia Sephia, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, WELLS and 12 other brands. STANDARD MOTOR PRODUCTS TX18T carries the "Popular" badge. They are grouped as Economy, Full Service Kit and Standard Replacement, with Standard Replacement the largest group at 19 parts from WELLS, WALKER PRODUCTS, BECK/ARNLEY and 7 other brands.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

11 Thermostat parts for the 1995 Kia Sephia come from 6 brands — MOTORAD, GATES, BECK/ARNLEY and 3 other brands. The "Popular" part is GATES 33488S.

In the Heavy Duty grade, GATES supplies 1 part: rated for severe service. A representative part number is GATES 33488S.

The Performance section lists 1 option from MOTORAD — engineered beyond original-equipment specification. MOTORAD 2323180 is listed in this group.

Premium: 1 part, from MOTORAD. A representative part number is MOTORAD 7323180.

Standard Replacement: 8 parts, from MOTORAD, BECK/ARNLEY, GATES and 3 other brands. A representative part number is GATES 33489.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Thermostat / Thermostat Housing / Water Outlet Seal parts are listed for the 1995 Kia Sephia, from MAHLE / CLEVITE, FEL-PRO, GATES and 6 other brands. FEL-PRO 35251 carries the "Popular" badge.

This table covers the housings and outlets the thermostat sits in. Read more

2 Thermostat Housing / Water Outlet parts for the 1995 Kia Sephia come from 2 brands — HYUNDAI and KIA.

This group includes HYUNDAI 0K24715172A and the remaining parts above.

This table covers the gaskets that seal the Water Inlet. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Water Inlet Gasket parts are listed for the 1995 Kia Sephia, from APEX and FEL-PRO.

This group includes APEX AWO2210 and FEL-PRO 35797.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

12 Water Pump parts for the 1995 Kia Sephia come from 12 brands — AIRTEX, BECK/ARNLEY, FVP and 9 other brands. The "Popular" part is AISIN WPZ800.

The Economy section: 6 options from AIRTEX, BECK/ARNLEY, FVP and 3 other brands. AIRTEX AW9305 is listed in this group.

Standard Replacement: 6 parts, from AISIN, GATES, GMB and 3 other brands. A representative part number is AISIN WPZ800.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Water Pump Gasket parts are listed for the 1995 Kia Sephia, from FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. FEL-PRO 35457 carries the "Popular" badge.

Part numbers include FEL-PRO 35457, FEL-PRO 35456 and APEX AWP3072, among others listed above.