1998 Kia Sephia Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

This group shows a single part: PA CARGO 74700.

This table covers the Bushing kits. Read more

One part is listed for the 1998 Kia Sephia — PA CARGO K74000.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

18 Filter parts are listed for the 1998 Kia Sephia, from ATP, FAMOUS BRAND, PIONEER and 8 other brands. PRO LINE PPL1225 carries the "Popular" badge.

In the Economy grade, FAMOUS BRAND, PRO LINE, ATP and 3 other brands supply 7 parts: the catalog's value-priced group. A representative part number is PRO LINE PPL1225.

The Standard Replacement section lists 10 options from ATP, PIONEER, BECK/ARNLEY and 2 other brands — built to original-equipment specification. ATP JX150 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts are listed for the 1998 Kia Sephia, from FEL-PRO, ATP, PIONEER and 1 other brand. FEL-PRO TOS18747 carries the "Popular" badge.

Part numbers include FEL-PRO TOS18747, ATP WG100 and FEL-PRO TOS18695, among others listed above.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts for the 1998 Kia Sephia come from 2 brands — SCHAEFFLER and SKF.

This group includes SCHAEFFLER SR3533 and SKF 99266.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Fluid Pump Seal parts for the 1998 Kia Sephia come from 3 brands — SKF, AUTO EXTRA and CHICAGO RAWHIDE.

Listed part numbers: AUTO EXTRA 710446, CHICAGO RAWHIDE 26640 and SKF 26145, plus the other parts above.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

5 Output Shaft Repair Sleeve parts are listed for the 1998 Kia Sephia, from NATIONAL, BCA, SCHAEFFLER and 2 other brands. NATIONAL 99139 carries the "Popular" badge.

Listed part numbers: NATIONAL 99139, BCA NS99139 and SCHAEFFLER SR3472, plus the other parts above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Output Shaft Seal parts are listed for the 1998 Kia Sephia, from NATIONAL, TIMKEN, BCA and 5 other brands. NATIONAL 2007N carries the "Popular" badge.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 1998 Kia Sephia — ROSTRA 520341.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts for the 1998 Kia Sephia come from 2 brands — PA CARGO and TRANSTEC. The "Popular" part is PA CARGO K74900.

The Banner Kit (Overhaul Kit + Friction Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK7400S is listed in this group.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 1 option from PA CARGO — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. PA CARGO MRK7400 is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK7400.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 2 options from PA CARGO and TRANSTEC — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. PA CARGO K74900 is listed in this group.

Listed part numbers: PA CARGO K74900, PA CARGO DK7400S and PA CARGO MRK7400, plus the other parts above.

This table covers the Shift Improvement kits. Read more

One part is listed for the 1998 Kia Sephia — TRANSGO SKF4AEL.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

7 Shift Solenoid parts for the 1998 Kia Sephia come from 3 brands — ROSTRA, PIONEER and ATP. The "Popular" part is ROSTRA 520543.

In the Single Solenoid grade, ROSTRA and PIONEER supply 2 parts: grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. A representative part number is ROSTRA 520543.

In the Solenoid Pack / Kit grade, ROSTRA and PIONEER supply 4 parts: grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. A representative part number is ROSTRA 520231.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include ROSTRA 520543, PIONEER 771055 and ROSTRA 520231, among others listed above.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

One part is listed for the 1998 Kia Sephia — TC REMANUFACTURING DA44.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Torque Converter Clutch Solenoid parts are listed for the 1998 Kia Sephia, from ATP and ROSTRA.

Listed part numbers: ATP NE55 and ROSTRA 520544.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

This group shows a single part: TIMKEN KWK99266.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Torque Converter Shaft Seal parts for the 1998 Kia Sephia come from 7 brands — NATIONAL, WJB / INMOTION PARTS, AUTO EXTRA and 4 other brands. The "Popular" part is NATIONAL 710446.

Listed part numbers: NATIONAL 710446 and WJB / INMOTION PARTS WS710446, plus the other parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

18 Transmission Fluid parts are listed for the 1998 Kia Sephia, from VALVOLINE, LUCAS OIL, MOBIL and 4 other brands. ACDELCO 109243 carries the "Popular" badge.

In the Dexron grade, ACDELCO and MOBIL supply 2 parts: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Multi-Vehicle grade, VALVOLINE, LIQUI MOLY, MOBIL and 2 other brands supply 12 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the SP-III (SP3) grade, IDEMITSU supplies 1 part: grouped under the catalog's "SP-III (SP3)" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30040097750.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts are listed for the 1998 Kia Sephia, from LUBEGARD and ATP. LUBEGARD 19610 carries the "Popular" badge.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and ATP AT203, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Transmission Mount parts for the 1998 Kia Sephia come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Listed part numbers: ANCHOR 8912, DEA / MARMON RIDE CONTROL A6750 and PIONEER 626750, plus the other parts above.