2010 Kia Magentis Engine Parts

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Camshaft Plug parts are listed for the 2010 Kia Magentis, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: FEL-PRO CP75023, MAHLE / CLEVITE 67728 and VICTOR REINZ 711237400.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts for the 2010 Kia Magentis come from 3 brands — NATIONAL, SKF and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 99114 and WJB / INMOTION PARTS WS99114, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Camshaft Seal parts for the 2010 Kia Magentis come from 8 brands — BCA, NATIONAL, ELRING and 5 other brands. The "Popular" part is BCA NS223010.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2010 Kia Magentis — TOPLINE CRHY11.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts are listed for the 2010 Kia Magentis, from KING ENGINE BEARINGS and TOPLINE.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4634XP.

The Standard Replacement section lists 3 options from KING ENGINE BEARINGS and TOPLINE — built to original-equipment specification. KING ENGINE BEARINGS CR4668SM is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Part numbers include KING ENGINE BEARINGS CR4634XP, KING ENGINE BEARINGS CR4668SM and KING ENGINE BEARINGS CR4624SM, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts are listed for the 2010 Kia Magentis, from AJUSA, FEL-PRO, TOPLINE and 2 other brands. MAHLE / CLEVITE CS54741 carries the "Popular" badge.

This group includes MAHLE / CLEVITE CS54741, AJUSA 54179200 and AJUSA 54244400 and the remaining parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 2010 Kia Magentis — TOPLINE CSHY11.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 2010 Kia Magentis come from 2 brands — TOPLINE and KING ENGINE BEARINGS.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5771XP is listed in this group.

Standard Replacement: 3 parts, from TOPLINE and KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5707SI.

3 further parts sit outside the graded sections, with the same engine-level match.

This group includes KING ENGINE BEARINGS MB5771XP, KING ENGINE BEARINGS MB5707SI and TOPLINE TWHY11 and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts for the 2010 Kia Magentis come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

Listed part numbers: BCA NS99166, BCA NS99145 and NATIONAL 99166, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

35 Crankshaft Seal parts for the 2010 Kia Magentis come from 13 brands — ELRING, VICTOR REINZ, FEL-PRO and 10 other brands. The "Popular" part is BCA NS224200. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts are listed for the 2010 Kia Magentis, from FEL-PRO, ELRING, TOPLINE and 2 other brands. FEL-PRO ES724651 carries the "Popular" badge.

This group includes FEL-PRO ES724651, AJUSA 81045900 and ELRING 825590 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

15 Cylinder Head Gasket parts are listed for the 2010 Kia Magentis, from AJUSA, FEL-PRO, VICTOR REINZ and 2 other brands. AJUSA 10198000 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Cylinder Head Gasket Set parts are listed for the 2010 Kia Magentis, from FEL-PRO, AJUSA, ELRING and 2 other brands. ELRING 982610 carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2010 Kia Magentis come from KAT'S HEATERS.

Part numbers include KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

5 Engine Cover parts are listed for the 2010 Kia Magentis, from TECHPRO and VARIOUS MFR. TECHPRO KI1228100 carries the "Popular" badge. All of them fit every engine offered in the 2010 Magentis.

This group includes TECHPRO KI1228100, TECHPRO KI1228116 and TECHPRO KI1228117 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 2010 Kia Magentis, from AJUSA, ELRING and TOPLINE.

This group includes AJUSA 50313900, AJUSA 50428900 and ELRING 966700 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 2010 Kia Magentis come from 4 brands — QUALCAST, TOPLINE, ITM ENGINE COMPONENTS and 1 other brand.

This group includes ITM ENGINE COMPONENTS RX9973, QUALCAST 1013191 and QUALCAST 1010809 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

8 Harmonic Balancer parts are listed for the 2010 Kia Magentis, from SKP, DORMAN, DAYCO and 2 other brands. SKP SK594341 carries the "Popular" badge.

In the Economy grade, SKP supplies 2 parts: the catalog's value-priced group. A representative part number is SKP SK594341.

The Standard Replacement section: 4 options from DORMAN, ATP and DAYCO. DORMAN 594341 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: SKP SK594341, SKP SK594408 and DORMAN 594341, plus the other parts above.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2010 Kia Magentis — STANDARD MOTOR PRODUCTS IMA143.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

15 Intake Manifold Gasket parts are listed for the 2010 Kia Magentis, from ELRING, FEL-PRO, AJUSA and 2 other brands. FEL-PRO MS97100 carries the "Popular" badge.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

5 Intake Manifold Runner Control Valve / Solenoid parts are listed for the 2010 Kia Magentis, from DORMAN, SKP and ACKOJA.

Part numbers include ACKOJA A52630011, DORMAN 911934 and DORMAN 911834, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts for the 2010 Kia Magentis come from 2 brands — ELRING and FEL-PRO.

This group includes ELRING 883790 and FEL-PRO MS96864.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts for the 2010 Kia Magentis come from 4 brands — QUALCAST, TOPLINE, ITM ENGINE COMPONENTS and 1 other brand.

Listed part numbers: ITM ENGINE COMPONENTS RV9973, QUALCAST 1013190 and QUALCAST 1010808, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

23 Motor Mount parts for the 2010 Kia Magentis come from 5 brands — DEA / MARMON RIDE CONTROL, ANCHOR, WESTAR and 2 other brands. The "Popular" part is SKP SKM9335.

The Economy section: 1 option from SKP. SKP SKM9335 is listed in this group.

Standard Replacement: 13 parts, from DEA / MARMON RIDE CONTROL, WESTAR, ANCHOR and 1 other brand. A representative part number is ANCHOR 9311.

9 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2010 Kia Magentis come from ANCHOR.

Listed part numbers: ANCHOR 300380 and ANCHOR 300383.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

27 Oil parts for the 2010 Kia Magentis come from 3 brands — MOBIL, VALVOLINE and PENTOSIN. The "Popular" part is MOBIL 125195. Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 13 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: SKP SK117107.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2010 Kia Magentis. All of them fit every engine offered in the 2010 Magentis.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts for the 2010 Kia Magentis come from 5 brands — DORMAN, ELRING, AGS and 2 other brands. The "Popular" part is DORMAN 090033. 5 parts fit every engine; the other 3 are engine-specific.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Oil Drain Plug Gasket parts are listed for the 2010 Kia Magentis, from DORMAN, FEL-PRO, AJUSA and 2 other brands. DORMAN 095147 carries the "Popular" badge. 4 parts fit every engine; the other 4 are engine-specific.

This group includes DORMAN 095147, DORMAN 095144 and AJUSA 22007100 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2010 Kia Magentis come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand. Every part fits both the 2.4L L4 and the 2.7L V6.

Listed part numbers: CALORSTAT OC2331, GATES 31109 and MOTORAD MO81, plus the other parts above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2010 Kia Magentis — ELRING 453020.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2010 Kia Magentis come from 13 brands — BOSCH, VARIOUS MFR, WIX and 10 other brands. The "Popular" part is MOBIL M1104A. 14 parts fit every engine; the other 4 are engine-specific.

The Economy section: 4 options from BOSCH, FVP, PRO-TEC and 1 other brand. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1104A is listed in this group.

Standard Replacement: 12 parts, from MOTORCRAFT, ACDELCO, BOSCH and 7 other brands. A representative part number is BOSCH 3312.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2010 Kia Magentis — FEL-PRO 72997.