2010 Kia Optima Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

This group shows a single part: HYUNDAI 456823A201.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

12 Filter parts are listed for the 2010 Kia Optima, from VAICO, WIX, PUROLATOR and 6 other brands. PUROLATOR P1290 carries the "Popular" badge.

In the Economy grade, PUROLATOR, AUTO EXTRA and VARIOUS MFR supply 3 parts: the catalog's value-priced group. A representative part number is PUROLATOR P1290.

The Standard Replacement section lists 8 options from VAICO, WIX, ATP and 2 other brands — built to original-equipment specification. WIX 51064 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

2 Flexplate parts for the 2010 Kia Optima come from 2 brands — ATP and PIONEER.

This group includes ATP Z520 and PIONEER FRA598.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

3 Fluid Cooler parts are listed for the 2010 Kia Optima, from GPD, SKP and TECHPRO.

This group includes GPD 2611328, SKP SKTOC097 and TECHPRO KI4050101.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts for the 2010 Kia Optima come from 2 brands — SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SR3502 and SKF 99182.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SKF 16984.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

3 Fluid Temperature Sensor parts are listed for the 2010 Kia Optima, from GPD, STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include GPD 1814541, STANDARD MOTOR PRODUCTS TX300 and WELLS 5S7692.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Output Shaft Seal parts are listed for the 2010 Kia Optima, from SKF, NATIONAL, WJB / INMOTION PARTS and 1 other brand. SKF 16141 carries the "Popular" badge.

This group includes SKF 16141, SKF 16143 and HYUNDAI 4311939020 and the remaining parts above.

This table covers the rebuild kits for this assembly. Read more

This group shows a single part: TRANSTEC 80000593.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

5 Shift Solenoid parts for the 2010 Kia Optima come from 4 brands — STANDARD MOTOR PRODUCTS, ACKOJA, HYUNDAI and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS TCS220.

This group includes STANDARD MOTOR PRODUCTS TCS220, ACKOJA A52770073 and HYUNDAI 4631339051 and the remaining parts above.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

4 Torque Converter Repair Sleeve parts for the 2010 Kia Optima come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS99157, NATIONAL 99157 and SCHAEFFLER SR3483, among others listed above.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts for the 2010 Kia Optima come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: BCA NS320583, NATIONAL 320583 and SCHAEFFLER SS3759, plus the other parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

12 Transmission Fluid parts are listed for the 2010 Kia Optima, from VALVOLINE, PENTOSIN, MOBIL and 4 other brands. MOBIL 126505 carries the "Popular" badge.

In the ATF +4 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058112.

In the Multi-Vehicle grade, VALVOLINE, MOBIL and LUBEGARD supply 6 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the SP-III (SP3) grade, BECK/ARNLEY and IDEMITSU supply 2 parts: grouped under the catalog's "SP-III (SP3)" designation — the notes column spells out what sets them apart. A representative part number is BECK/ARNLEY 2522003.

The SP-IV (SP 4) section lists 1 option from AISIN — grouped under the catalog's "SP-IV (SP 4)" designation — the notes column spells out what sets them apart. AISIN ATFSP4 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 8 Transmission Fluid Additive parts for the 2010 Kia Optima. LUBEGARD 19610 carries the "Popular" badge.

This group includes LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Transmission Mount parts for the 2010 Kia Optima come from 6 brands — SKP, ANCHOR, BECK/ARNLEY and 3 other brands. The "Popular" part is SKP SKM9334.

The Economy section: 1 option from SKP. SKP SKM9334 is listed in this group.

Standard Replacement: 5 parts, from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 2 other brands. A representative part number is ANCHOR 9334.

Part numbers include SKP SKM9334, ANCHOR 9334 and BECK/ARNLEY 1042146, among others listed above.