2017 Kia Sorento Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2017 Kia Sorento — HYUNDAI 478103B520.

This table covers the AWD Coupling Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 AWD Coupling Oil Pump parts for the 2017 Kia Sorento come from 2 brands — DORMAN and SKP. Every part fits all 3 engine options (2.0L L4 Turbocharged, 2.4L L4 and 3.3L V6).

This group includes DORMAN 600221 and SKP SK600221.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN SL260463.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

22 CV Axle parts for the 2017 Kia Sorento come from 4 brands — GSP, TRAKMOTIVE, TOP NOTCH and 1 other brand. The "Popular" part is APWI HY8461A. 8 parts fit every engine; the other 14 are engine-specific.

This table covers the CV Intermediate shafts. Read more

TRAKMOTIVE supplies the 4 CV Intermediate Shaft parts for the 2017 Kia Sorento.

This group includes TRAKMOTIVE KA3527, TRAKMOTIVE HY3532 and TRAKMOTIVE HY3528 and the remaining parts above.

This table covers the constant-velocity joints at each end of a drive axle. Read more

This group shows a single part: ACKOJA A529939.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

2 CV Joint Boot parts for the 2017 Kia Sorento come from 2 brands — BECK/ARNLEY and MEVOTECH. Every part fits all 3 engine options (2.0L L4 Turbocharged, 2.4L L4 and 3.3L V6).

Part numbers include BECK/ARNLEY 1032818 and MEVOTECH DX859.

This table covers the carriers that hold the differential gears in the axle. Read more

This group shows a single part: HYUNDAI 458223B250.

This table covers the bearings and races that support the differential carrier. Read more

3 Differential Carrier Bearing / Race parts for the 2017 Kia Sorento come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL. Every part fits all 3 engine options (2.0L L4 Turbocharged, 2.4L L4 and 3.3L V6).

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTA35 is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NBA35.

Part numbers include WJB / INMOTION PARTS WTA35, BCA NBA35 and NATIONAL A35.

This table covers the Differential Lock actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: AAE DLA0100.

This table covers the bearings and races on the differential pinion. Read more

14 Differential Pinion Bearing / Race parts are listed for the 2017 Kia Sorento, from WJB / INMOTION PARTS, NATIONAL, BCA and 2 other brands. WJB / INMOTION PARTS WTM86649 carries the "Popular" badge. All of them fit every engine offered in the 2017 Sorento.

Economy: 5 parts, from WJB / INMOTION PARTS and FAMOUS BRAND. A representative part number is WJB / INMOTION PARTS WTM86649.

The Standard Replacement section: 9 options from NATIONAL, BCA and ACDELCO. NATIONAL M86610 is listed in this group.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN SL260471.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

5 Drive Shaft parts are listed for the 2017 Kia Sorento, from TOP NOTCH, GSP and CARDONE. TOP NOTCH TN7514PS carries the "Popular" badge. 3 parts fit every engine; the other 2 are engine-specific.

This group includes TOP NOTCH TN7514PS, CARDONE 657070 and GSP PS901585 and the remaining parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

13 Gear Oil parts for the 2017 Kia Sorento come from 5 brands — VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. The "Popular" part is MOBIL 104361. Every part fits all 3 engine options (2.0L L4 Turbocharged, 2.4L L4 and 3.3L V6).

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

13 Transfer Case Fluid parts for the 2017 Kia Sorento come from 5 brands — VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. The "Popular" part is MOBIL 104361. Every part fits all 3 engine options (2.0L L4 Turbocharged, 2.4L L4 and 3.3L V6).

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts for the 2017 Kia Sorento come from 2 brands — NATIONAL and TIMKEN. 1 part fits every engine; the other 1 is engine-specific.

This group includes NATIONAL 711180 and TIMKEN SL260155.

This table covers the viscous couplers in the AWD driveline. Read more

3 Viscous Coupler parts are listed for the 2017 Kia Sorento, from HYUNDAI, KIA and SKP.

Part numbers include HYUNDAI 478003B520 and SKP SK8003B520, among others listed above.