2018 Kia FORTE5 Automatic Transmission Parts

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

7 Filter parts for the 2018 Kia FORTE5 come from 4 brands — VARIOUS MFR, BECK/ARNLEY, VAICO and 1 other brand. The "Popular" part is ATP B205. Every part fits both the 1.6L L4 Turbocharged and the 2.0L L4.

The Economy section lists 2 options from VARIOUS MFR — the catalog's value-priced group. VARIOUS MFR PT99808 is listed in this group.

In the Standard Replacement grade, BECK/ARNLEY, VAICO and ATP supply 5 parts: built to original-equipment specification. A representative part number is ATP B205.

This group includes ATP B205, VARIOUS MFR PT99808 and VARIOUS MFR PT99493 and the remaining parts above.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

2 Flexplate parts are listed for the 2018 Kia FORTE5, from ATP and PIONEER.

This group includes ATP Z520 and PIONEER FRA598.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

2 Fluid Cooler parts for the 2018 Kia FORTE5 come from 2 brands — ACKOJA and DORMAN.

Part numbers include ACKOJA A52601007 and DORMAN 918983.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

This group shows a single part: SUNSONG 5801895.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND MIT21T.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

This group shows a single part: WELLS 5S15269.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 2018 Kia FORTE5, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 711014 and WJB / INMOTION PARTS WS711014.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

3 Output Shaft Repair Sleeve parts for the 2018 Kia FORTE5 come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include BCA NS99145, NATIONAL 99145 and WJB / INMOTION PARTS WS99145.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Output Shaft Seal parts for the 2018 Kia FORTE5 come from 2 brands — NATIONAL and WJB / INMOTION PARTS. The "Popular" part is NATIONAL 711015.

This group includes NATIONAL 711015, NATIONAL 711018 and NATIONAL 711152 and the remaining parts above.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: WELLS 2N1375.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2018 Kia FORTE5 — HYUNDAI 463133B011.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Torque Converter Shaft Seal parts are listed for the 2018 Kia FORTE5, from NATIONAL, BCA, JAPANESE OE and 2 other brands. NATIONAL 710615 carries the "Popular" badge. 1 part fits every engine; the other 4 are engine-specific.

This group includes NATIONAL 710615, BCA NS710615 and JAPANESE OE 9031143004 and the remaining parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

16 Transmission Fluid parts for the 2018 Kia FORTE5 come from 9 brands — VALVOLINE, PENTOSIN, LIQUI MOLY and 6 other brands. The "Popular" part is ACDELCO 109243. 3 parts fit every engine; the other 13 are engine-specific.

In the ATF 64 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058113.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

In the Dual Clutch grade, PENTOSIN supplies 1 part: grouped under the catalog's "Dual Clutch" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1052208.

The Multi-Vehicle section lists 8 options from VALVOLINE, LIQUI MOLY, MOBIL and 1 other brand — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

In the SP-IV (SP 4) grade, AISIN and IDEMITSU supply 2 parts: grouped under the catalog's "SP-IV (SP 4)" designation — the notes column spells out what sets them apart. A representative part number is AISIN ATFSP4.

The ZF Fluid section lists 1 option from ZF — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. ZF 5961308625 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

7 Transmission Fluid Additive parts for the 2018 Kia FORTE5 come from LUBEGARD. The "Popular" part is LUBEGARD 63010. 3 parts fit every engine; the other 4 are engine-specific.

This group includes LUBEGARD 63010, LUBEGARD 19610 and LUBEGARD 63016 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Transmission Mount parts are listed for the 2018 Kia FORTE5, from ANCHOR and WESTAR.

This group includes ANCHOR 10275 and WESTAR EM7550.