2019 Kia Forte Engine Parts

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRHY23L.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts for the 2019 Kia Forte come from 2 brands — ENGINETECH and TOPLINE.

This group includes ENGINETECH BB1100 and TOPLINE RBHY23.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts for the 2019 Kia Forte come from 6 brands — AJUSA, APEX, FEL-PRO and 3 other brands. The "Popular" part is APEX ACS13028. 1 part fits every engine; the other 6 are engine-specific.

This group includes APEX ACS13028, FEL-PRO CS26561 and AJUSA 54244600 and the remaining parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: TOPLINE CSHY23S.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts are listed for the 2019 Kia Forte, from TOPLINE and ENGINETECH.

Part numbers include ENGINETECH BC1101, TOPLINE TWHY23 and TOPLINE MBHY23L.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts are listed for the 2019 Kia Forte, from WJB / INMOTION PARTS, BCA and NATIONAL.

Part numbers include BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Crankshaft Seal parts are listed for the 2019 Kia Forte, from AJUSA, FEL-PRO, NATIONAL and 5 other brands. FEL-PRO BS40742 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts for the 2019 Kia Forte come from 5 brands — AJUSA, APEX, FEL-PRO and 2 other brands.

Part numbers include AJUSA 81061400, AJUSA 81066700 and APEX AHB1328, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts for the 2019 Kia Forte come from 4 brands — AJUSA, APEX, FEL-PRO and 1 other brand.

Part numbers include AJUSA 10239000, AJUSA 10252000 and APEX AHG1427, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts for the 2019 Kia Forte come from 4 brands — ENGINETECH, MAHLE / CLEVITE, AJUSA and 1 other brand. The "Popular" part is ENGINETECH HY20HSE.

This group includes ENGINETECH HY20HSE, MAHLE / CLEVITE HS55397A and AJUSA 52529500 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2019 Kia Forte.

Part numbers include KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2019 Kia Forte come from 2 brands — TECHPRO and VARIOUS MFR. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include TECHPRO KI1228171 and TECHPRO KI1228167, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2019 Kia Forte come from 2 brands — AJUSA and TOPLINE.

Part numbers include AJUSA 50485000, AJUSA 50524700 and TOPLINE CGSHY23N.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 2019 Kia Forte, from HYUNDAI, MELLING and TOPLINE.

Part numbers include HYUNDAI 222122E000, MELLING V5571 and TOPLINE EVHY23.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

This group shows a single part: WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2019 Kia Forte come from 5 brands — HYUNDAI, ATP, DORMAN and 2 other brands. The "Popular" part is HYUNDAI 231242E003.

Listed part numbers: HYUNDAI 231242E003, ATP 102233 and DORMAN 594431, plus the other parts above.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS IMA145.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts for the 2019 Kia Forte come from 3 brands — AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: AJUSA 13275000, AJUSA 13276100 and MAHLE / CLEVITE MS20453, plus the other parts above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS IMRC23.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts are listed for the 2019 Kia Forte, from HYUNDAI, MELLING and TOPLINE.

This group includes HYUNDAI 222112E400, MELLING V5565 and TOPLINE IVHY23.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts are listed for the 2019 Kia Forte, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

This group includes ANCHOR 10029, DEA / MARMON RIDE CONTROL A71213 and PIONEER 610029 and the remaining parts above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2019 Kia Forte — ANCHOR 301064.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

109 Oil parts are listed for the 2019 Kia Forte, from VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. MOBIL 125195 carries the "Popular" badge. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2019 Kia Forte, from DORMAN and GPD.

Listed part numbers: DORMAN 918908 and GPD 2611481.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2019 Kia Forte — AUTOTECNICA HY1422346.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2019 Kia Forte, from DORMAN, AGS, REIN and 1 other brand. DORMAN 090033 carries the "Popular" badge. 1 part fits every engine; the other 5 are engine-specific.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2019 Kia Forte come from 4 brands — DORMAN, AJUSA, FEL-PRO and 1 other brand. The "Popular" part is DORMAN 095147. 1 part fits every engine; the other 4 are engine-specific.

This group includes DORMAN 095147, AJUSA 22007100 and DORMAN 995147CD and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

6 Oil Filler Cap parts are listed for the 2019 Kia Forte, from MOTORAD, SKP, CALORSTAT and 1 other brand. 1 part fits every engine; the other 5 are engine-specific.

This group includes CALORSTAT OC2331, GATES 31083 and MOTORAD MO81 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts are listed for the 2019 Kia Forte, from VARIOUS MFR, BOSCH, WIX and 13 other brands. VARIOUS MFR 2630035503 carries the "Popular" badge. 4 parts fit every engine; the other 16 are engine-specific.

In the Economy grade, VARIOUS MFR, BOSCH, FRAM and 2 other brands supply 5 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR 2630035503.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51334XP.

The Standard Replacement section lists 13 options from ACDELCO, BOSCH, DENSO and 9 other brands — built to original-equipment specification. BOSCH 3312 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts for the 2019 Kia Forte come from 3 brands — DORMAN, SPECTRA PREMIUM and SKP.

This group includes DORMAN 264092, DORMAN 264276 and SKP SKHYP32A and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2019 Kia Forte — VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts are listed for the 2019 Kia Forte, from ENGINETECH and MELLING.

Part numbers include ENGINETECH EP214 and MELLING M574.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

This group shows a single part: TOPLINE PAHY23V.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts are listed for the 2019 Kia Forte, from ENGINETECH and TOPLINE.

Part numbers include ENGINETECH EB0284 and TOPLINE PBHY23.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 2019 Kia Forte come from 3 brands — HASTINGS MANUFACTURING, ENGINETECH and TOPLINE.

In the Premium grade, ENGINETECH supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH C31894.

Standard Replacement: 2 parts, from HASTINGS MANUFACTURING and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C4357.

2 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include ENGINETECH C31894, HASTINGS MANUFACTURING 2C4357 and TOPLINE RSHY23, among others listed above.