2019 Kia Stinger Automatic Transmission Parts

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

5 Clutch Plate Pack parts for the 2019 Kia Stinger come from RAYBESTOS POWERTRAIN.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 2 parts: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN FRMHYUND09.

The Steel Plate Pack section lists 1 option from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN STMHYUND09 is listed in this group.

2 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: RAYBESTOS POWERTRAIN FRMHYUND09, RAYBESTOS POWERTRAIN RGPZ271 and RAYBESTOS POWERTRAIN STMHYUND09, plus the other parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

3 Filter parts for the 2019 Kia Stinger come from 3 brands — ATP, BECK/ARNLEY and RAYBESTOS POWERTRAIN. Every part fits both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged.

Listed part numbers: ATP B205, BECK/ARNLEY 0440474 and RAYBESTOS POWERTRAIN 515335.

This table covers the pans that hold automatic-transmission fluid. Read more

One part is listed for the 2019 Kia Stinger — VAICO V530201.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts are listed for the 2019 Kia Stinger, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2019 Stinger.

This group includes NATIONAL 99181 and WJB / INMOTION PARTS WS99181.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Fluid Pump Seal parts are listed for the 2019 Kia Stinger, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2019 Stinger.

Listed part numbers: NATIONAL 224663 and WJB / INMOTION PARTS WS224663.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts are listed for the 2019 Kia Stinger, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2019 Stinger.

Part numbers include BCA NS221207, NATIONAL 221207 and WJB / INMOTION PARTS WS221207.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: WELLS 2N1275.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2019 Kia Stinger — TIMKEN 221207.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

12 Transmission Fluid parts for the 2019 Kia Stinger come from 6 brands — VALVOLINE, LIQUI MOLY, PENTOSIN and 3 other brands. The "Popular" part is ACDELCO 109243. Every part fits both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged.

In the ATF 64 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058113.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Multi-Vehicle section lists 8 options from VALVOLINE, LIQUI MOLY, MOBIL and 1 other brand — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

5 Transmission Fluid Additive parts for the 2019 Kia Stinger come from LUBEGARD. The "Popular" part is LUBEGARD 19610. Every part fits both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 63010, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

ANCHOR supplies both parts for the 2019 Kia Stinger. All of them fit every engine offered in the 2019 Stinger.

Part numbers include ANCHOR 10380 and ANCHOR 10385.