14 Engine parts are listed for the 1955 Kurtis 500M, in 7 part types, covering the 5.4L 331cid V8 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The engine on the 1955 Kurtis 500M covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Intake Manifold Gasket (3 parts), Oil Pan Gasket (3 parts) and Cylinder Head Gasket Set (2 parts). The other 4 part types cover the remaining 6 parts.
The 1955 Kurtis 500M came with a single engine, the 5.4L 331cid V8, and every part is verified against it.
3 brands supply engine parts for the 1955 Kurtis 500M, led by VICTOR REINZ (6 parts), FEL-PRO (6 parts) and MAHLE / CLEVITE (2 parts).
Each part number listed for the 1955 Kurtis 500M opens a page with every vehicle that part fits.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ | 191004401 | 🇺🇸 US | Set | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: VICTOR REINZ 191004401.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | HS7673PT2 | 🇺🇸 US | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ | 021093001 | 🇺🇸 US | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Cylinder Head Gasket Set parts are listed for the 1955 Kurtis 500M, from FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO HS7673PT2 and VICTOR REINZ 021093001.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | FS7673PT2 | 🇺🇸 US | Overhaul Set | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 1955 Kurtis 500M — FEL-PRO FS7673PT2.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | MS8931SH1 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE | MS15038X | 🇺🇸 US | Beaded Steel | View on Amazon |
| VICTOR REINZ | 111012401 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Intake Manifold Gasket parts are listed for the 1955 Kurtis 500M, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
This group includes FEL-PRO MS8931SH1, MAHLE / CLEVITE MS15038X and VICTOR REINZ 111012401.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | OS5363C2 | 🇺🇸 US | View on Amazon | |
| MAHLE / CLEVITE | OS30494 | 🇺🇸 US | Cork-Rubber | View on Amazon |
| VICTOR REINZ | 101015501 | 🇺🇸 US | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Pan Gasket parts for the 1955 Kurtis 500M come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO OS5363C2, MAHLE / CLEVITE OS30494 and VICTOR REINZ 101015501.
Push Rod Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | PS5369C | 🇺🇸 US | Cork | View on Amazon |
| VICTOR REINZ | 181006601 | 🇺🇸 US | Improved DesignCork | View on Amazon |
This table covers the Push Rod gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Push Rod Gasket Set parts for the 1955 Kurtis 500M come from 2 brands — FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO PS5369C and VICTOR REINZ 181006601.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | VS5392 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ | 151040801 | 🇺🇸 US | SetCork | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Valve Cover Gasket parts for the 1955 Kurtis 500M come from 2 brands — FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO VS5392 and VICTOR REINZ 151040801.
Buying Engine Parts for a 1955 Kurtis 500M
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 5.4L 331cid V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Intake Manifold Gasket and Oil Pan Gasket .
Frequently Asked Questions
How many engine parts fit the 1955 Kurtis 500M?
Our catalog currently lists 14 engine parts for the 1955 Kurtis 500M across 7 subcategories and 3 brands, covering the 5.4L 331cid V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1955 Kurtis 500M?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1955 Kurtis 500M was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1955 Kurtis 500M?
Every part on this page is matched to the 5.4L 331cid V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1955 Kurtis 500M
Engine Parts for Other Kurtis 500M Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.