1985 Lada Signet Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

16 Ignition parts are listed for the 1985 Lada Signet, in 2 part types, covering both the 1.3L L4 and the 1.5L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1985 Lada Signet, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 16 listed parts are Spark Plug (14 parts) and Spark Plug Wire (2 parts).

Spark Plug

Summary: Notes include pre-set gaps of 0.024", 0.025", 0.030", 0.032", 0.036", 0.040", 0.041", 0.044" and 0.045". Replacement brands in this table include NGK, CHAMPION and ACDELCO.

Copper / Nickel

Brand Part Number Markets Notes Buy
NGK Popular Fits: all 1985 Signet engines 4008
🇨🇦 CA
StandardPre-Set Gap: 0.032"
Fitment notes — NGK 4008
StandardPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025 IN
View on
Amazon
ACDELCO Fits: all 1985 Signet engines R43XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R43XLS
ProfessionalConventionalPre-Set Gap: 0.030"
Original Equipment-Recommended Gap: .025
View on
Amazon
CHAMPION Fits: all 1985 Signet engines 415
🇨🇦 CA
Copper PlusPre-Set Gap: 0.032"
Fitment notes — CHAMPION 415
Copper PlusPre-Set Gap: 0.032"
OE-Recommended Gap: 0.024"Resistor Plug
OE TypeOE-Recommended Gap: 0.024"Resistor Plug
View on
Amazon
CHAMPION Fits: all 1985 Signet engines 4151
🇨🇦 CA
Copper PlusClassification: Champion Copper Plus Small Engine
Fitment notes — CHAMPION 4151
Copper PlusClassification: Champion Copper Plus Small Engine
OE-Recommended Gap: 0.024"Resistor Plug
OE TypeOE-Recommended Gap: 0.024"Resistor Plug
View on
Amazon
NGK Fits: all 1985 Signet engines 6427
🇨🇦 CA
V-PowerPre-Set Gap: 0.032"
Fitment notes — NGK 6427
V-PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025 IN
View on
Amazon
NGK Fits: all 1985 Signet engines 7131
🇨🇦 CA
StandardPre-Set Gap: 0.036"
Fitment notes — NGK 7131
StandardPre-Set Gap: 0.036"
OE-Recommended Gap: 0.025 IN
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Fits: all 1985 Signet engines 41802
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41802
ProfessionalDouble PlatinumPre-Set Gap: 0.045"
OE-Recommended Gap: 0.025" (IN)
View on
Amazon
AUTOLITE Fits: all 1985 Signet engines APP64
🇨🇦 CA
Double PlatinumHex Size: 13/16 In
Fitment notes — AUTOLITE APP64
Double PlatinumHex Size: 13/16 InPre-Set Gap: 0.044"
Gap .025 (In) 0.6 (mm)
View on
Amazon
CHAMPION Fits: all 1985 Signet engines 7415
🇨🇦 CA
Double Platinum PowerPre-Set Gap: 0.032"
Fitment notes — CHAMPION 7415
Double Platinum PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.024"Resistor Plug
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK Popular Fits: all 1985 Signet engines 6637
🇨🇦 CA
Iridium IXPre-Set Gap: 0.032"
Fitment notes — NGK 6637
Iridium IXPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025 IN
View on
Amazon
CHAMPION Fits: all 1985 Signet engines 9804
🇨🇦 CA
IridiumPre-Set Gap: 0.03"
Fitment notes — CHAMPION 9804
IridiumPre-Set Gap: 0.03"
OE-Recommended Gap: 0.024"
View on
Amazon
SKP Fits: all 1985 Signet engines SP1042
🇨🇦 CA
Tapered Ground Electrode with Platinum Chip
Fitment notes — SKP SP1042
Tapered Ground Electrode with Platinum Chip
Gap: .025/0.6mm
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK Popular Fits: all 1985 Signet engines 7084
🇨🇦 CA
G-PowerPre-Set Gap: 0.040"
Fitment notes — NGK 7084
G-PowerPre-Set Gap: 0.040"
OE-Recommended Gap: 0.025 IN
View on
Amazon
ACDELCO Fits: 1.5L L4 4
🇺🇸 US 🇨🇦 CA
ProfessionalRapidfire
Fitment notes — ACDELCO 4
ProfessionalRapidfirePre-Set Gap: 0.041"
OE-Recommended Gap: 0.025" (IN)
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Spark Plug Wire

Premium

Brand Part Number Markets Notes Buy
NGK Fits: all 1985 Signet engines 58398
🇨🇦 CA
Set
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WALKER PRODUCTS Fits: all 1985 Signet engines 9241033
🇨🇦 CA
Direct FitSet
Fitment notes — WALKER PRODUCTS 9241033
Direct FitSetSuppression Core
View on
Amazon

This table covers the Spark Plug wires.

Buying Ignition Parts for a 1985 Lada Signet

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Spark Plug Wire .

Frequently Asked Questions

How many ignition parts fit the 1985 Lada Signet?

Our catalog currently lists 16 ignition parts for the 1985 Lada Signet across 2 subcategories and 6 brands, covering both the 1.3L L4 and the 1.5L L4. Each part is matched to the engine(s) it fits.

Do ignition parts differ between 1985 Lada Signet engines?

Some do. 15 parts fit every engine; the other 1 is engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of ignition problems on a 1985 Lada Signet?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1985 Lada Signet?

Notes on this page include pre-set gaps of 0.024", 0.025", 0.030", 0.032", 0.036", 0.040", 0.041", 0.044" and 0.045". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1985 Lada Signet was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1985 Lada Signet?

First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1985 Lada Signet

Ignition Parts for Other Lada Signet Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.