6 Ignition parts are listed for the 1968 Lancia Flaminia, in 1 part type, covering both the 2.5L V6 and the 2.8L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1968 Lancia Flaminia, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Every listed part is a Spark Plug.
The 1968 Lancia Flaminia was sold with both the 2.5L V6 and the 2.8L V6. All 6 parts on this page fit every engine.
4 brands supply ignition parts for the 1968 Lancia Flaminia, led by CHAMPION (3 parts), ACDELCO (1 part) and AUTOLITE (1 part), plus 1 more brand. Quality grades include Copper / Nickel and Iridium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1968 Lancia Flaminia. 2 parts have it, including ACDELCO R42XLS (Spark Plug) and CHAMPION 104 (Spark Plug). Each part number opens a page with every vehicle that part fits.
Spark Plug
Summary: Notes include pre-set gaps of 0.020", 0.025", 0.032" and 0.035". Both engines share the same gaps. Replacement brands in this table include CHAMPION, ACDELCO and AUTOLITE.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: all 1968 Flaminia engines | R42XLS | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Popular Fits: all 1968 Flaminia engines | 104 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION Fits: all 1968 Flaminia engines | 803 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION Fits: all 1968 Flaminia engines | 803C | 🇺🇸 US | Copper Plus | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOLITE Fits: all 1968 Flaminia engines | XP63 | 🇺🇸 US | Iridium XPDisplay Pack | View on Amazon |
| SKP Fits: all 1968 Flaminia engines | SP1041 | 🇺🇸 US | Tapered Ground Electrode with Platinum Chip | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
6 Spark Plug parts are listed for the 1968 Lancia Flaminia, from CHAMPION, ACDELCO, AUTOLITE and 1 other brand. ACDELCO R42XLS carries the "Popular" badge. All of them fit every engine offered in the 1968 Flaminia.
In the Copper / Nickel grade, CHAMPION and ACDELCO supply 4 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO R42XLS.
The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 2 options from AUTOLITE and SKP — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. AUTOLITE XP63 is listed in this group.
Listed part numbers: ACDELCO R42XLS, CHAMPION 104 and CHAMPION 803, plus the other parts above.
Buying Ignition Parts for a 1968 Lancia Flaminia
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- You do not need to pick an engine: every ignition part on this page fits both the 2.5L V6 and the 2.8L V6.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1968 Lancia Flaminia?
Our catalog currently lists 6 ignition parts for the 1968 Lancia Flaminia across 1 subcategory and 4 brands, covering both the 2.5L V6 and the 2.8L V6. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1968 Lancia Flaminia engines?
No. On this page every ignition part fits both the 2.5L V6 and the 2.8L V6. You do not need to pick an engine to choose the right row — use the notes for position and trim.
What are the signs of ignition problems on a 1968 Lancia Flaminia?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1968 Lancia Flaminia?
Notes on this page include pre-set gaps of 0.020", 0.025", 0.032" and 0.035". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Lancia Flaminia was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1968 Lancia Flaminia?
Every part on this page already fits both the 2.5L V6 and the 2.8L V6. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1968 Lancia Flaminia
Ignition Parts for Other Lancia Flaminia Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.