33 Engine parts are listed for the 1976 Lancia Scorpion, in 11 part types, covering the 1.8L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The engine on the 1976 Lancia Scorpion covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (9 parts), Crankshaft Repair Sleeve (5 parts) and Crankshaft Seal (5 parts). The other 8 part types cover the remaining 14 parts.
The 1976 Lancia Scorpion came with a single engine, the 1.8L L4, and every part is verified against it.
15 brands supply engine parts for the 1976 Lancia Scorpion, led by NATIONAL (5 parts), WJB / INMOTION PARTS (5 parts) and VICTOR REINZ (5 parts), plus 12 more brands. Quality grades include Economy and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1976 Lancia Scorpion. 4 parts have it, including NATIONAL 99157 (Crankshaft Repair Sleeve) and NATIONAL 224025 (Crankshaft Seal). Each part number opens a page with every vehicle that part fits.
Camshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL | 99114 | 🇺🇸 US | View on Amazon | |
| SCHAEFFLER | SR3463 | 🇺🇸 US | 11 MM Width35.56 mm Outside Diameter | View on Amazon |
| WJB / INMOTION PARTS | WS99114 | 🇺🇸 US | View on Amazon |
This table covers the wear sleeves used to restore a Camshaft seal surface.
3 Camshaft Repair Sleeve parts for the 1976 Lancia Scorpion come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.
This group includes NATIONAL 99114, SCHAEFFLER SR3463 and WJB / INMOTION PARTS WS99114.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA | NS223035 | 🇺🇸 US | View on Amazon | |
| NATIONAL | 223035 | 🇺🇸 US | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Camshaft Seal parts for the 1976 Lancia Scorpion come from 2 brands — BCA and NATIONAL.
Part numbers include BCA NS223035 and NATIONAL 223035.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | CB1138AL | 🇺🇸 US | A Series (Aluminum)Pair | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
One part is listed for the 1976 Lancia Scorpion — MAHLE / CLEVITE CB1138AL.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular | 99157 | 🇺🇸 US | Front | View on Amazon |
| BCA | NS99157 | 🇺🇸 US | Front | View on Amazon |
| SCHAEFFLER | SR3483 | 🇺🇸 US | FrontFits Shaft Diameters of 1.572"-1.578" | View on Amazon |
| WJB / INMOTION PARTS | WS99272 | 🇺🇸 US | Rear | View on Amazon |
| WJB / INMOTION PARTS | WS99157 | 🇺🇸 US | Front | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
5 Crankshaft Repair Sleeve parts for the 1976 Lancia Scorpion come from 4 brands — WJB / INMOTION PARTS, NATIONAL, BCA and 1 other brand. The "Popular" part is NATIONAL 99157.
Listed part numbers: NATIONAL 99157, BCA NS99157 and SCHAEFFLER SR3483, plus the other parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular | 224025 | 🇺🇸 US | Front | View on Amazon |
| NATIONAL | 227040 | 🇺🇸 US | Rear | View on Amazon |
| SCHAEFFLER | SS2642 | 🇺🇸 US | Front2.21" O.D. X 0.28" Width | View on Amazon |
| WJB / INMOTION PARTS | WS224025 | 🇺🇸 US | Front | View on Amazon |
| WJB / INMOTION PARTS | WS227040 | 🇺🇸 US | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Crankshaft Seal parts for the 1976 Lancia Scorpion come from 3 brands — NATIONAL, WJB / INMOTION PARTS and SCHAEFFLER. The "Popular" part is NATIONAL 224025.
This group includes NATIONAL 224025, NATIONAL 227040 and SCHAEFFLER SS2642 and the remaining parts above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 3635 | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ | 613180000 | 🇺🇸 US | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Cylinder Head Gasket parts are listed for the 1976 Lancia Scorpion, from MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include MAHLE / CLEVITE 3635 and VICTOR REINZ 613180000.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ | 023180001 | 🇺🇸 US | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 1976 Lancia Scorpion — VICTOR REINZ 023180001.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | MS15244 | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ | 713572200 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Intake Manifold Gasket parts are listed for the 1976 Lancia Scorpion, from MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: MAHLE / CLEVITE MS15244 and VICTOR REINZ 713572200.
O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ | 411043100 | 🇺🇸 US | View on Amazon |
This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
This group shows a single part: VICTOR REINZ 411043100.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Popular | 72137WS | 🇺🇸 US | Workshop Oil Filter | View on Amazon |
| AUTO EXTRA | 61851374 | 🇺🇸 US | View on Amazon | |
| FAMOUS BRAND | 85374 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PUROLATOR | L10183 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR | PG183 | 🇺🇸 US | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | PF53 | 🇺🇸 US 🇨🇦 CA | Gold / Professional or Gold / Professional DurapackSpin-On | View on Amazon |
| BOSCH | 3402 | 🇺🇸 US | Premium Oil Filter | View on Amazon |
| HASTINGS / BALDWIN | LF423 | 🇺🇸 US | View on Amazon | |
| WIX | 51374 | 🇺🇸 US | Bypass Relief Valve Setting: 8-11 PSISpin-On Filter | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
9 Oil Filter parts for the 1976 Lancia Scorpion come from 8 brands — BOSCH, AUTO EXTRA, FAMOUS BRAND and 5 other brands. The "Popular" part is BOSCH 72137WS.
The Economy section lists 5 options from BOSCH, AUTO EXTRA, FAMOUS BRAND and 2 other brands — the catalog's value-priced group. BOSCH 72137WS is listed in this group.
In the Standard Replacement grade, ACDELCO, BOSCH, HASTINGS / BALDWIN and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ACDELCO PF53.
Listed part numbers: BOSCH 72137WS, AUTO EXTRA 61851374 and FAMOUS BRAND 85374, plus the other parts above.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | VS26065C | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ | 151077901 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Valve Cover Gasket parts for the 1976 Lancia Scorpion come from 2 brands — FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO VS26065C and VICTOR REINZ 151077901.
Buying Engine Parts for a 1976 Lancia Scorpion
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 1.8L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Crankshaft Repair Sleeve .
Frequently Asked Questions
How many engine parts fit the 1976 Lancia Scorpion?
Our catalog currently lists 33 engine parts for the 1976 Lancia Scorpion across 11 subcategories and 15 brands, covering the 1.8L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1976 Lancia Scorpion?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1976 Lancia Scorpion was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1976 Lancia Scorpion?
Every part on this page is matched to the 1.8L L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1976 Lancia Scorpion
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.