1981 Lancia Zagato Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts are listed for the 1981 Lancia Zagato, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 99114, SCHAEFFLER SR3463 and WJB / INMOTION PARTS WS99114.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts are listed for the 1981 Lancia Zagato, from AJUSA, BCA, ITM ENGINE COMPONENTS and 1 other brand.

This group includes AJUSA 15009700, BCA NS223035 and ITM ENGINE COMPONENTS 1506303 and the remaining parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts for the 1981 Lancia Zagato come from 2 brands — ITM ENGINE COMPONENTS and MAHLE / CLEVITE.

Part numbers include ITM ENGINE COMPONENTS 4B2825 and MAHLE / CLEVITE CB1138AL.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54009700.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1981 Lancia Zagato — ITM ENGINE COMPONENTS 5M2826.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts are listed for the 1981 Lancia Zagato, from WJB / INMOTION PARTS, NATIONAL, BCA and 1 other brand. NATIONAL 99157 carries the "Popular" badge.

Part numbers include NATIONAL 99157, BCA NS99157 and SCHAEFFLER SR3483, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts are listed for the 1981 Lancia Zagato, from NATIONAL, WJB / INMOTION PARTS and AJUSA. NATIONAL 224025 carries the "Popular" badge.

Part numbers include NATIONAL 224025, AJUSA 15033900 and NATIONAL 227040, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts for the 1981 Lancia Zagato come from 3 brands — AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

This group includes AJUSA 10004800, MAHLE / CLEVITE 3635 and VICTOR REINZ 613180000.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 1981 Lancia Zagato come from 3 brands — AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: AJUSA 52011200, MAHLE / CLEVITE HS3635X and VICTOR REINZ 023180001.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50045000.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1981 Lancia Zagato — ITM ENGINE COMPONENTS RX34400.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts for the 1981 Lancia Zagato come from 4 brands — AJUSA, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 1 other brand.

Part numbers include AJUSA 13026200, ITM ENGINE COMPONENTS 0956300 and MAHLE / CLEVITE MS15244, among others listed above.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 1981 Lancia Zagato — VICTOR REINZ 411043100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts are listed for the 1981 Lancia Zagato, from VARIOUS MFR, BOSCH, FAMOUS BRAND and 3 other brands. VARIOUS MFR PG4670 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR, BOSCH, FAMOUS BRAND and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PG4670.

The Standard Replacement section lists 4 options from ACDELCO, BOSCH, VARIOUS MFR and 1 other brand — built to original-equipment specification. ACDELCO PF53 is listed in this group.

Part numbers include VARIOUS MFR PG4670, BOSCH 72137WS and FAMOUS BRAND 85189, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts are listed for the 1981 Lancia Zagato, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include AJUSA 14030900, MAHLE / CLEVITE OS30586 and VICTOR REINZ 711296100.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: ITM ENGINE COMPONENTS 0216045.

This table covers the Thrust washers. Read more

One part is listed for the 1981 Lancia Zagato — ITM ENGINE COMPONENTS 1T2826.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

This group shows a single part: ITM ENGINE COMPONENTS 4071.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1981 Lancia Zagato — ITM ENGINE COMPONENTS 1506301.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts are listed for the 1981 Lancia Zagato, from ITM ENGINE COMPONENTS, FEL-PRO, AJUSA and 1 other brand. FEL-PRO VS26065C carries the "Popular" badge.

Part numbers include FEL-PRO VS26065C, AJUSA 11002700 and ITM ENGINE COMPONENTS 0936306, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

ITM ENGINE COMPONENTS supplies both parts for the 1981 Lancia Zagato.

Listed part numbers: ITM ENGINE COMPONENTS VG1147CI and ITM ENGINE COMPONENTS VG1147BR.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: ITM ENGINE COMPONENTS 051101.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts are listed for the 1981 Lancia Zagato, from AJUSA and ITM ENGINE COMPONENTS.

Part numbers include AJUSA 12004500, AJUSA 57004900 and ITM ENGINE COMPONENTS SS154.