1962 Lotus Seven Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

22 Ignition parts are listed for the 1962 Lotus Seven, in 2 part types, covering all 3 engine options (1.3L L4, 1.5L L4 and 997cc L4). Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1962 Lotus Seven, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 22 listed parts are Spark Plug (13 parts) and Ignition Coil (9 parts).

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: 1.3L L4, 1.5L L4 UC15T
🇺🇸 US
T-Series
View on
Amazon
FVP Fits: 1.3L L4, 1.5L L4 UC15F
🇺🇸 US
View on
Amazon
HOLSTEIN Fits: 1.3L L4, 1.5L L4 2IGC0058
🇺🇸 US
View on
Amazon
SKP Fits: 1.3L L4, 1.5L L4 SKUC15T
🇺🇸 US
Coil Pack
View on
Amazon
SPECTRA PREMIUM Fits: 1.3L L4, 1.5L L4 C622
🇺🇸 US
Pack
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
NGK Popular Fits: 1.3L L4, 1.5L L4 48863
🇺🇸 US
Connections May be Eyelet or Spade
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 1.3L L4, 1.5L L4 UC15
🇺🇸 US
View on
Amazon
UNITED MOTOR PRODUCTS Fits: 1.3L L4, 1.5L L4 C15
🇺🇸 US
View on
Amazon
WELLS Fits: 1.3L L4, 1.5L L4 5C1019
🇺🇸 US
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.024", 0.025", 0.03", 0.032", 0.035", 0.036" and 0.040". Replacement brands in this table include NGK, CHAMPION and ACDELCO.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 1.5L L4, 1.3L L4 R42XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R42XLS
ProfessionalConventionalPre-Set Gap: 0.035"
Original Equipment-Recommended Gap: .025
View on
Amazon
NGK Popular Fits: 1.3L L4 4008
🇺🇸 US
StandardPre-Set Gap: 0.032"
Fitment notes — NGK 4008
StandardPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025 IN
View on
Amazon
CHAMPION Fits: 1.3L L4, 1.5L L4 315
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 315
Copper PlusPre-Set Gap: 0.025"
OE TypeOE-Recommended Gap: 0.024"
View on
Amazon
CHAMPION Fits: 1.3L L4, 1.5L L4 332
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 332
Copper PlusPre-Set Gap: 0.025"
Resistor TypeOE-Recommended Gap: 0.024"
View on
Amazon
CHAMPION Fits: 1.3L L4, 1.5L L4 3321
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 3321
Copper Plus
Resistor TypeOE-Recommended Gap: 0.024"
View on
Amazon
NGK Fits: 1.3L L4 6427
🇺🇸 US
V-PowerPre-Set Gap: 0.032"
Fitment notes — NGK 6427
V-PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025 IN
View on
Amazon
NGK Fits: 1.3L L4 7131
🇺🇸 US
StandardPre-Set Gap: 0.036"
Fitment notes — NGK 7131
StandardPre-Set Gap: 0.036"
OE-Recommended Gap: 0.025 IN
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Fits: 1.3L L4, 1.5L L4 41804
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41804
ProfessionalDouble PlatinumPre-Set Gap: 0.035"
OE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION Fits: 1.3L L4, 1.5L L4 7415
🇺🇸 US
Double Platinum PowerPre-Set Gap: 0.032"
Fitment notes — CHAMPION 7415
Double Platinum PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.024"Resistor Plug
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
CHAMPION Popular Fits: 1.5L L4, 1.3L L4 9804
🇺🇸 US
IridiumPre-Set Gap: 0.03"
Fitment notes — CHAMPION 9804
IridiumPre-Set Gap: 0.03"
OE-Recommended Gap: 0.024"
View on
Amazon
NGK Popular Fits: 1.3L L4 6637
🇺🇸 US
Iridium IXPre-Set Gap: 0.032"
Fitment notes — NGK 6637
Iridium IXPre-Set Gap: 0.032"
OE-Recommended Gap: 0.025 IN
View on
Amazon
SKP Fits: 1.3L L4, 1.5L L4 SP1041
🇺🇸 US
Tapered Ground Electrode with Platinum Chip
Fitment notes — SKP SP1041
Tapered Ground Electrode with Platinum Chip
Gap: .025
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK Popular Fits: 1.3L L4 7084
🇺🇸 US
G-PowerPre-Set Gap: 0.040"
Fitment notes — NGK 7084
G-PowerPre-Set Gap: 0.040"
OE-Recommended Gap: 0.025 IN
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1962 Lotus Seven

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1962 Lotus Seven?

Our catalog currently lists 22 ignition parts for the 1962 Lotus Seven across 2 subcategories and 10 brands, covering all 3 engine options (1.3L L4, 1.5L L4 and 997cc L4). Each part is matched to the engine(s) it fits.

Do ignition parts differ between 1962 Lotus Seven engines?

Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of ignition problems on a 1962 Lotus Seven?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1962 Lotus Seven?

Notes on this page include pre-set gaps of 0.024", 0.025", 0.03", 0.032", 0.035", 0.036" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1962 Lotus Seven was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1962 Lotus Seven?

First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1962 Lotus Seven

Ignition Parts for Other Lotus Seven Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.