1968 Lotus Europa Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 24 engine parts for the 1968 Lotus Europa, across 5 part types, covering both the 1.5L L4 and the 1.6L L4. Every part shows its brand, manufacturer part number and fitment notes.

On the 1968 Lotus Europa, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 17 parts of the 24 listed are Crankshaft Repair Sleeve (7 parts), Crankshaft Seal (6 parts) and Camshaft Seal (4 parts). The other 2 part types cover the remaining 7 parts.

Camshaft Repair Sleeve

Brand Part Number Markets Notes Buy
NATIONAL Fits: 1.6L L4 99128
🇺🇸 US
View on
Amazon
SCHAEFFLER Fits: 1.6L L4 SR3467
🇺🇸 US
11.13 mm Width38.1 mm Outside Diameter
View on
Amazon
WJB / INMOTION PARTS Fits: 1.6L L4 WS99128
🇺🇸 US
View on
Amazon

This table covers the wear sleeves used to restore a Camshaft seal surface.

Camshaft Seal

Brand Part Number Markets Notes Buy
BCA Fits: 1.6L L4 NS223230
🇺🇸 US
View on
Amazon
JAPANESE OE Fits: 1.6L L4 806732050
🇺🇸 US
Nippon Reinz
Fitment notes — JAPANESE OE 806732050
Nippon Reinz
Part Manufactured In Japan
View on
Amazon
NATIONAL Fits: 1.6L L4 223230
🇺🇸 US
View on
Amazon
WJB / INMOTION PARTS Fits: 1.6L L4 WS223230
🇺🇸 US
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA Popular Fits: 1.6L L4 NS99315
🇺🇸 US
Rear
View on
Amazon
NATIONAL Popular Fits: 1.6L L4 99177
🇺🇸 US
Front0.551 IN Width
Fitment notes — NATIONAL 99177
Front0.551 IN Width2.087 IN Outside Diameter
View on
Amazon
BCA Fits: 1.6L L4 NS99177
🇺🇸 US
Front
View on
Amazon
NATIONAL Fits: 1.6L L4 99315
🇺🇸 US
Rear0.827 IN Width
Fitment notes — NATIONAL 99315
Rear0.827 IN Width3.543 IN Outside Diameter
View on
Amazon
SCHAEFFLER Fits: 1.6L L4 SR3499
🇺🇸 US
Front14 MM Width
Fitment notes — SCHAEFFLER SR3499
Front14 MM Width58 mm Outside Diameter
View on
Amazon
SCHAEFFLER Fits: 1.6L L4 SR3549
🇺🇸 US
Rear24 MM Width
Fitment notes — SCHAEFFLER SR3549
Rear24 MM Width89.99 mm Outside Diameter80.01 mm Inside Diameter
View on
Amazon
WJB / INMOTION PARTS Fits: 1.6L L4 WS99315
🇺🇸 US
Rear
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 1.6L L4 228010
🇺🇸 US
Rear0.512 IN Width
Fitment notes — NATIONAL 228010
Rear0.512 IN Width3.951 IN Outside Diameter
View on
Amazon
WJB / INMOTION PARTS Popular Fits: 1.6L L4 WS228010
🇺🇸 US
Housing Bore: 3.9369999999999998 InMaterial: Polyacrylate
Fitment notes — WJB / INMOTION PARTS WS228010
Housing Bore: 3.9369999999999998 InMaterial: PolyacrylateRear
View on
Amazon
NATIONAL Fits: 1.6L L4 224520
🇺🇸 US
Front
View on
Amazon
SCHAEFFLER Fits: 1.6L L4 SS2826
🇺🇸 US
Front2.37" O.D. X 0.39" Width
View on
Amazon
SCHAEFFLER Fits: 1.6L L4 SS3346
🇺🇸 US
Sealing Material: Viton
Fitment notes — SCHAEFFLER SS3346
Sealing Material: Viton
Rear3.94" O.D. X 0.39" Width
View on
Amazon
WJB / INMOTION PARTS Fits: 1.6L L4 WS224520
🇺🇸 US
Front
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
CHAMP / LUBER-FINER Fits: 1.5L L4 PH2814
🇺🇸 US 🇨🇦 CA
Inside Diameter: 3/4-16 Thread.
View on
Amazon
VARIOUS MFR Fits: 1.5L L4 PG101
🇺🇸 US 🇨🇦 CA
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Fits: 1.5L L4 PF2210
🇺🇸 US 🇨🇦 CA
GM Original Equipment
View on
Amazon
WIX Fits: 1.5L L4 51335
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Buying Engine Parts for a 1968 Lotus Europa

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Repair Sleeve and Crankshaft Seal .

Frequently Asked Questions

How many engine parts fit the 1968 Lotus Europa?

Our catalog currently lists 24 engine parts for the 1968 Lotus Europa across 5 subcategories and 9 brands, covering both the 1.5L L4 and the 1.6L L4. Each part is matched to the engine(s) it fits.

Do engine parts differ between 1968 Lotus Europa engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 1968 Lotus Europa?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Lotus Europa was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1968 Lotus Europa?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1968 Lotus Europa

Engine Parts for Other Lotus Europa Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.