The 2006 Maserati Spyder has 5 ignition parts with verified fitment on this page — 2 part types and 3 brands, covering the 4.2L V8 engine. Each part includes a manufacturer part number and application notes.
On the 2006 Maserati Spyder, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 5 listed parts are Spark Plug (4 parts) and Ignition Coil (1 part).
The 2006 Maserati Spyder came with a single engine, the 4.2L V8, and every part is verified against it.
3 brands supply ignition parts for the 2006 Maserati Spyder, led by CHAMPION (3 parts), BOSCH (1 part) and NGK (1 part). Quality grades include Copper / Nickel and Double Platinum.
Each part number listed for the 2006 Maserati Spyder opens a page with every vehicle that part fits.
Ignition Coil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH | 0221604012 | 🇺🇸 US | Right | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
This group shows a single part: BOSCH 0221604012.
Spark Plug
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION | 309E | 🇺🇸 US | Copper PlusPre-Set Gap: 0.029" | View on Amazon |
| CHAMPION | 654 | 🇺🇸 US | RacingPre-Set Gap: 0.03" | View on Amazon |
| CHAMPION | 309 | 🇺🇸 US | Copper Plus | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK | 6378 | 🇺🇸 US | Laser PlatinumPre-Set Gap: 0.028" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
4 Spark Plug parts are listed for the 2006 Maserati Spyder, from CHAMPION and NGK.
In the Copper / Nickel grade, CHAMPION supplies 3 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is CHAMPION 309E.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, NGK supplies 1 part: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 6378.
Part numbers include CHAMPION 309E, CHAMPION 654 and CHAMPION 309, among others listed above.
Buying Ignition Parts for a 2006 Maserati Spyder
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 4.2L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 2006 Maserati Spyder?
Our catalog currently lists 5 ignition parts for the 2006 Maserati Spyder across 2 subcategories and 3 brands, covering the 4.2L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2006 Maserati Spyder?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 2006 Maserati Spyder?
Notes on this page include pre-set gaps of 0.028", 0.029" and 0.03". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2006 Maserati Spyder was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2006 Maserati Spyder?
Every part on this page is matched to the 4.2L V8 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2006 Maserati Spyder
Ignition Parts for Other Maserati Spyder Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.