This page lists 13 suspension parts for the 2010 Maybach 62, across 5 part types, covering both the 5.5L V12 Turbocharged and the 6.0L V12 Turbocharged. Every part shows its brand, manufacturer part number and fitment notes.
The suspension system on the 2010 Maybach 62 controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. The largest groups are Air Compressor (6 parts), Ride Height Sensor (3 parts) and Shock / Strut (2 parts). The other 2 part types cover the remaining 2 parts.
The 2010 Maybach 62 was sold with both the 5.5L V12 Turbocharged and the 6.0L V12 Turbocharged. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2010 Maybach 62 suspension parts are ARNOTT (6 parts), FCS (2 parts) and SKP (1 part), plus 4 more brands.
2 parts on this 2010 Maybach 62 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including ARNOTT P2192 (Air Compressor) and SKP SKAS016 (Air Compressor). Click any part number to see every vehicle that part fits.
Air Compressor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARNOTT Popular Fits: 5.5L V12 Turbocharged | P2192 | 🇺🇸 US 🇨🇦 CA | ArnottAir Suspension Compressor | View on Amazon |
| SKP Popular Fits: 5.5L V12 Turbocharged | SKAS016 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ARNOTT Fits: 5.5L V12 Turbocharged | P3296 | 🇺🇸 US 🇨🇦 CA | ArnottAir Suspension Compressor | View on Amazon |
| CARDONE Fits: 5.5L V12 Turbocharged | 4J2003C | 🇺🇸 US 🇨🇦 CA | Air Suspension Compressor | View on Amazon |
| FCS Fits: 5.5L V12 Turbocharged | KY002 | 🇺🇸 US 🇨🇦 CA | with Airmatic & ADS | View on Amazon |
| WESTAR Fits: 5.5L V12 Turbocharged | CD7727 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Air compressors. Typical signs include no cold air, rapid clutch cycling, or a growl when the clutch engages. Replace the drier and evacuate the system whenever the circuit is opened.
6 Air Compressor parts for the 2010 Maybach 62 come from 5 brands — ARNOTT, SKP, CARDONE and 2 other brands. The "Popular" part is ARNOTT P2192.
Listed part numbers: ARNOTT P2192, SKP SKAS016 and ARNOTT P3296, plus the other parts above.
Air Suspension Solenoid / Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARNOTT Fits: 5.5L V12 Turbocharged | VB3951 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Air Suspension Solenoid valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
This group shows a single part: ARNOTT VB3951.
Control Arm Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN Fits: 5.5L V12 Turbocharged | SCB0223P | 🇺🇸 US 🇨🇦 CA | Rear Lower Outer Rearward | View on Amazon |
This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
This group shows a single part: REIN SCB0223P.
Ride Height Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARNOTT Fits: 5.5L V12 Turbocharged | RH3500 | 🇺🇸 US 🇨🇦 CA | Fits Rear | View on Amazon |
| FCS Fits: 5.5L V12 Turbocharged | HS004 | 🇺🇸 US 🇨🇦 CA | Fits Rear | View on Amazon |
| MONROE Fits: 5.5L V12 Turbocharged | HS10204 | 🇺🇸 US 🇨🇦 CA | Fits Frontwith Air Suspension | View on Amazon |
This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
3 Ride Height Sensor parts for the 2010 Maybach 62 come from 3 brands — ARNOTT, FCS and MONROE.
Listed part numbers: ARNOTT RH3500, FCS HS004 and MONROE HS10204.
Shock / Strut
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARNOTT Fits: 5.5L V12 Turbocharged | AS2746 | 🇺🇸 US 🇨🇦 CA | RemanufacturedAir Strut | View on Amazon |
| ARNOTT Fits: 5.5L V12 Turbocharged | AS2747 | 🇺🇸 US 🇨🇦 CA | RemanufacturedAir Strut | View on Amazon |
This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed.
2 Shock / Strut parts for the 2010 Maybach 62 come from ARNOTT.
Listed part numbers: ARNOTT AS2746 and ARNOTT AS2747.
Buying Suspension Parts for a 2010 Maybach 62
On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.
- Match the engine first. Every suspension part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Air Compressor and Ride Height Sensor .
Frequently Asked Questions
How many suspension parts fit the 2010 Maybach 62?
Our catalog currently lists 13 suspension parts for the 2010 Maybach 62 across 5 subcategories and 7 brands, covering both the 5.5L V12 Turbocharged and the 6.0L V12 Turbocharged. Each part is matched to the engine(s) it fits.
Do suspension parts differ between 2010 Maybach 62 engines?
Yes. Every suspension part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of suspension problems on a 2010 Maybach 62?
Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2010 Maybach 62 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2010 Maybach 62?
First match the engine — each row shows which engine(s) the part fits. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2010 Maybach 62
Suspension Parts for Other Maybach 62 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.