The 2011 Maybach 62 has 5 electrical connector parts with verified fitment on this page — 2 part types and 3 brands, covering both the 5.5L V12 Turbocharged and the 6.0L V12 Turbocharged. Each part includes a manufacturer part number and application notes.
The connector system on the 2011 Maybach 62 supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules. All 5 listed parts are Vapor Canister Purge Valve / Solenoid Connector (4 parts) and Headlamp Wiring Harness / Connector (1 part).
The 2011 Maybach 62 was sold with both the 5.5L V12 Turbocharged and the 6.0L V12 Turbocharged. All 5 parts on this page fit every engine.
The most listed brands for 2011 Maybach 62 electrical connector parts are STANDARD MOTOR PRODUCTS (3 parts), ACDELCO (1 part) and WELLS (1 part).
Each part number listed for the 2011 Maybach 62 opens a page with every vehicle that part fits.
Headlamp Wiring Harness / Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 2011 62 engines | LWH105 | 🇺🇸 US 🇨🇦 CA | Blue StreakHigh Temperature | View on Amazon |
This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape.
This group shows a single part: STANDARD MOTOR PRODUCTS LWH105.
Vapor Canister Purge Valve / Solenoid Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: all 2011 62 engines | PT2164 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2011 62 engines | HP3860 | 🇺🇸 US 🇨🇦 CA | HandypackTerminal Type: Blade | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2011 62 engines | S697 | 🇺🇸 US 🇨🇦 CA | Connector Shape: RectangleHarness Length | View on Amazon |
| WELLS Fits: all 2011 62 engines | 1P1347 | 🇺🇸 US 🇨🇦 CA | Wire Gauge Measurement: 18 | View on Amazon |
This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
4 Vapor Canister Purge Valve / Solenoid Connector parts are listed for the 2011 Maybach 62, from STANDARD MOTOR PRODUCTS, ACDELCO and WELLS. All of them fit every engine offered in the 2011 62.
This group includes ACDELCO PT2164, STANDARD MOTOR PRODUCTS HP3860 and STANDARD MOTOR PRODUCTS S697 and the remaining parts above.
Buying Electrical Connector Parts for a 2011 Maybach 62
On this vehicle, the connector system supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules.
- You do not need to pick an engine: every electrical connector part on this page fits both the 5.5L V12 Turbocharged and the 6.0L V12 Turbocharged.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Vapor Canister Purge Valve / Solenoid Connector and Headlamp Wiring Harness / Connector .
Frequently Asked Questions
How many electrical connector parts fit the 2011 Maybach 62?
Our catalog currently lists 5 electrical connector parts for the 2011 Maybach 62 across 2 subcategories and 3 brands, covering both the 5.5L V12 Turbocharged and the 6.0L V12 Turbocharged. Each part is matched to the engine(s) it fits.
Do electrical connector parts differ between 2011 Maybach 62 engines?
No. On this page every electrical connector part fits both the 5.5L V12 Turbocharged and the 6.0L V12 Turbocharged. You do not need to pick an engine to choose the right row — use the notes for position and trim.
What are the signs of electrical connector problems on a 2011 Maybach 62?
Common symptoms include intermittent faults that move when the harness is wiggled, green corrosion inside a plug, or melted connector housings near heat sources. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2011 Maybach 62 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2011 Maybach 62?
Every part on this page already fits both the 5.5L V12 Turbocharged and the 6.0L V12 Turbocharged. Then match the connector by terminal count and keyway, not just appearance — many families look identical but will not lock. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2011 Maybach 62
Electrical Connector Parts for Other Maybach 62 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.