The 2023 Mazda CX-3 has 23 engine parts with verified fitment on this page — 7 part types and 11 brands, covering the 2.0L L4 engine. Each part includes a manufacturer part number and application notes.
The engine on the 2023 Mazda CX-3 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil (10 parts), Oil Filter (6 parts) and Motor Mount (2 parts). The other 4 part types cover the remaining 5 parts.
Every part on this page is matched to the 2.0L L4 — the only engine offered in the 2023 Mazda CX-3.
The most listed brands for 2023 Mazda CX-3 engine parts are VALVOLINE (6 parts), PENTOSIN (4 parts) and ANCHOR (3 parts), plus 8 more brands. Quality grades include Economy, Standard Replacement and High Performance / Heavy Duty.
4 parts on this 2023 Mazda CX-3 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including VALVOLINE VV955 (Oil) and MOBIL M1108A (Oil Filter). Click any part number to see every vehicle that part fits.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR | 10219 | 🇲🇽 MX | RightHydraulic | View on Amazon |
| PIONEER | 610015 | 🇲🇽 MX | Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
2 Motor Mount parts are listed for the 2023 Mazda CX-3, from ANCHOR and PIONEER.
Part numbers include ANCHOR 10219 and PIONEER 610015.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR | 301076 | 🇲🇽 MX | with Complete Assembly Engine Mounts | View on Amazon |
This table covers the Motor Mount kits.
One part is listed for the 2023 Mazda CX-3 — ANCHOR 301076.
Oil
Summary: Notes list SAE 0W-20 and SAE 5W-30. Confirm the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE and PENTOSIN.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular | VV955 | 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Popular | 904564 | 🇲🇽 MX | Restore & Protect Full Synthetic SAE 5W-301 Quart | View on Amazon |
| PENTOSIN | 8044210 | 🇲🇽 MX | 0W-20-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN | 8044317 | 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| PENTOSIN | 8044212 | 🇲🇽 MX | 0W-20-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| PENTOSIN | 8044319 | 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| VALVOLINE | 891678 | 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE | 891670 | 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE | 904566 | 🇲🇽 MX | Restore & Protect Full Synthetic SAE 5W-305 Quart | View on Amazon |
| VALVOLINE | 881164 | 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
10 Oil parts are listed for the 2023 Mazda CX-3, from VALVOLINE and PENTOSIN. VALVOLINE VV955 carries the "Popular" badge.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 095147 | 🇲🇽 MX | SizeM14 | View on Amazon |
| DORMAN | 995147CD | 🇲🇽 MX | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Drain Plug Gasket parts for the 2023 Mazda CX-3 come from DORMAN.
Listed part numbers: DORMAN 095147 and DORMAN 995147CD.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP | R7002 | 🇲🇽 MX | OE# 1WPE14302 | View on Amazon |
| PRO-TEC | PXL57002 | 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR | PG4612 | 🇲🇽 MX | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular | M1108A | 🇲🇽 MX | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX Popular | 57002 | 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR | PG4612EX | 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
6 Oil Filter parts are listed for the 2023 Mazda CX-3, from VARIOUS MFR, FVP, PRO-TEC and 2 other brands. MOBIL M1108A carries the "Popular" badge.
In the Economy grade, FVP, PRO-TEC and VARIOUS MFR supply 3 parts: the catalog's value-priced group. A representative part number is FVP R7002.
In the High Performance / Heavy Duty grade, MOBIL supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1108A.
The Standard Replacement section lists 2 options from WIX and VARIOUS MFR — built to original-equipment specification. WIX 57002 is listed in this group.
Part numbers include MOBIL M1108A, FVP R7002 and PRO-TEC PXL57002, among others listed above.
Torque Strut Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR | 10135 | 🇲🇽 MX | Rear Lower | View on Amazon |
This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
This group shows a single part: ANCHOR 10135.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH | EPF1104 | 🇲🇽 MX | Intake and Exhaust1 Round bead type | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
This group shows a single part: ENGINETECH EPF1104.
Buying Engine Parts for a 2023 Mazda CX-3
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 2.0L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2023 Mazda CX-3?
Our catalog currently lists 23 engine parts for the 2023 Mazda CX-3 across 7 subcategories and 11 brands, covering the 2.0L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2023 Mazda CX-3?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2023 Mazda CX-3?
Oil rows on this page include SAE 0W-20 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2023 Mazda CX-3 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2023 Mazda CX-3?
Every part on this page is matched to the 2.0L L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2023 Mazda CX-3
Engine Parts for Other Mazda CX-3 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.