1966 MG MGB Suspension Parts

Engine:
1.8L L4

8 Suspension parts are listed for the 1966 MG MGB, in 5 part types, covering the 1.8L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1966 MG MGB, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. Most of the listed parts are Sway Bar Bushing (3 parts), Control Arm Bushing (2 parts) and Bump Stop (1 part). The other 2 part types cover the remaining 2 parts.

Bump Stop

Brand Part Number Markets Notes Buy
ENERGY SUSPENSION 106101G
🇺🇸 US
Bump Stop SetIncludes 2 Per Set
Fitment notes — ENERGY SUSPENSION 106101G
Bump Stop SetIncludes 2 Per SetPerformance PolyurethaneRear
View on
Amazon

This table covers the bump stops that limit suspension travel.

Control Arm Bushing

Economy

Brand Part Number Markets Notes Buy
ÜRO PARTS BHH1123
🇺🇸 US
FrontOne Piece: MGB V-8 Style
View on
Amazon

High Performance

Brand Part Number Markets Notes Buy
ENERGY SUSPENSION 103102G
🇺🇸 US
Control Arm Bushing SetKit
Fitment notes — ENERGY SUSPENSION 103102G
Control Arm Bushing SetKitPerformance PolyurethaneFront
View on
Amazon

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.

Leaf Spring Bushing

Brand Part Number Markets Notes Buy
ENERGY SUSPENSION 102101G
🇺🇸 US
Leaf Spring Bushing SetPerformance Polyurethane
Fitment notes — ENERGY SUSPENSION 102101G
Leaf Spring Bushing SetPerformance PolyurethaneRear
View on
Amazon

This table covers the Leaf Spring bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.

Leaf Spring Insulator

Brand Part Number Markets Notes Buy
ENERGY SUSPENSION 106102G
🇺🇸 US
Leaf Spring Pad SetPerformance Polyurethane
Fitment notes — ENERGY SUSPENSION 106102G
Leaf Spring Pad SetPerformance PolyurethaneRear
View on
Amazon

This table covers the Leaf Spring insulators.

Sway Bar Bushing

Economy

Brand Part Number Markets Notes Buy
METRO RP22
🇺🇸 US 🇨🇦 CA
Sold In Pairs
Fitment notes — METRO RP22
Sold In Pairs
Base Model, GT ModelStabilizer Bar Bushings1-1/2" high, 3/16" I.D.
View on
Amazon

High Performance

Brand Part Number Markets Notes Buy
ENERGY SUSPENSION 105101G
🇺🇸 US
Sway Bar Bushing SetPerformance Polyurethane
Fitment notes — ENERGY SUSPENSION 105101G
Sway Bar Bushing SetPerformance Polyurethane
FrontBar Diameter.9/16"
View on
Amazon
ENERGY SUSPENSION 108101G
🇺🇸 US
End Link Bushing SetPerformance Polyurethane
Fitment notes — ENERGY SUSPENSION 108101G
End Link Bushing SetPerformance PolyurethaneFront
View on
Amazon

This table covers the bushings that clamp the anti-roll bar to the chassis. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.

Buying Suspension Parts for a 1966 MG MGB

On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.

  • Confirm you have the 1.8L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Sway Bar Bushing and Control Arm Bushing .

Frequently Asked Questions

How many suspension parts fit the 1966 MG MGB?

Our catalog currently lists 8 suspension parts for the 1966 MG MGB across 5 subcategories and 3 brands, covering the 1.8L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of suspension problems on a 1966 MG MGB?

Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1966 MG MGB was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1966 MG MGB?

Every part on this page is matched to the 1.8L L4 engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1966 MG MGB

Suspension Parts for Other MG MGB Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.