The 1969 MG MGC has 13 engine parts with verified fitment on this page — 7 part types and 7 brands, covering the 2.9L L6 engine. Each part includes a manufacturer part number and application notes.
On the 1969 MG MGC, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Timing Cover Seal (3 parts), Oil Filter (2 parts) and Timing Belt Pulley (2 parts). The other 4 part types cover the remaining 6 parts.
The 1969 MG MGC came with a single engine, the 2.9L L6, and every part is verified against it.
7 brands supply engine parts for the 1969 MG MGC, led by ITM ENGINE COMPONENTS (3 parts), SCHAEFFLER (3 parts) and BECK/ARNLEY (2 parts), plus 4 more brands.
Each part number listed for the 1969 MG MGC opens a page with every vehicle that part fits.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ITM ENGINE COMPONENTS | 1504002 | 🇺🇸 US | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: ITM ENGINE COMPONENTS 1504002.
Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS / BALDWIN | LF174 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WIX | 51302 | 🇺🇸 US 🇨🇦 CA | Style: Cartridge Lube Metal Canister | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
2 Oil Filter parts for the 1969 MG MGC come from 2 brands — HASTINGS / BALDWIN and WIX.
Listed part numbers: HASTINGS / BALDWIN LF174 and WIX 51302.
Timing Belt Pulley
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY | 0513860 | 🇺🇸 US 🇨🇦 CA | Bearing Only | View on Amazon |
| BECK/ARNLEY | 0513954 | 🇺🇸 US 🇨🇦 CA | Bearing Only | View on Amazon |
This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt.
2 Timing Belt Pulley parts for the 1969 MG MGC come from BECK/ARNLEY.
Part numbers include BECK/ARNLEY 0513860 and BECK/ARNLEY 0513954.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ITM ENGINE COMPONENTS | 2358 | 🇺🇸 US | View on Amazon | |
| MELLING | 3DR54 | 🇺🇸 US | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
2 Timing Chain parts are listed for the 1969 MG MGC, from ITM ENGINE COMPONENTS and MELLING.
Listed part numbers: ITM ENGINE COMPONENTS 2358 and MELLING 3DR54.
Timing Cover Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER | SR3509 | 🇺🇸 US 🇨🇦 CA | with 1.938 In Shaft17.48 mm Width | View on Amazon |
| SKF | 99193 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter: 1.937 In | View on Amazon |
This table covers the wear sleeves used to restore a Timing Cover seal surface.
2 Timing Cover Repair Sleeve parts for the 1969 MG MGC come from 2 brands — SCHAEFFLER and SKF.
Part numbers include SCHAEFFLER SR3509 and SKF 99193.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER | SS3046 | 🇺🇸 US 🇨🇦 CA | Front3.01" O.D. X 0.31" Width | View on Amazon |
| SCHAEFFLER | SS2976 | 🇺🇸 US | 2.51" O.D. X 0.38" Width | View on Amazon |
| SKF | 19220 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Timing Cover Seal parts for the 1969 MG MGC come from 2 brands — SCHAEFFLER and SKF.
Part numbers include SCHAEFFLER SS3046, SCHAEFFLER SS2976 and SKF 19220.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ITM ENGINE COMPONENTS | 0934003 | 🇺🇸 US | Fits Rearor Center | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ITM ENGINE COMPONENTS 0934003.
Buying Engine Parts for a 1969 MG MGC
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 2.9L L6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Timing Cover Seal and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 1969 MG MGC?
Our catalog currently lists 13 engine parts for the 1969 MG MGC across 7 subcategories and 7 brands, covering the 2.9L L6 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1969 MG MGC?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1969 MG MGC was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1969 MG MGC?
Every part on this page is matched to the 2.9L L6 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1969 MG MGC
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.