2019 Mitsubishi Mirage Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2019 Mitsubishi Mirage — AJUSA 54249900.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Crankshaft Seal parts for the 2019 Mitsubishi Mirage come from 2 brands — AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 15094900, AJUSA 71008700 and MAHLE / CLEVITE 68128 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2019 Mitsubishi Mirage — AJUSA 81067200.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts are listed for the 2019 Mitsubishi Mirage, from AJUSA, APEX and MAHLE / CLEVITE.

This group includes AJUSA 10166400, APEX AHG1365 and MAHLE / CLEVITE 55548.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts are listed for the 2019 Mitsubishi Mirage, from AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 52484700 and MAHLE / CLEVITE HS55548.

This table covers the Engine covers. Read more

One part is listed for the 2019 Mitsubishi Mirage — TECHPRO MI1228141.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2019 Mitsubishi Mirage — AJUSA 50436600.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts are listed for the 2019 Mitsubishi Mirage, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 13241600 and MAHLE / CLEVITE MS20639.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2019 Mitsubishi Mirage come from 5 brands — SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is ANCHOR 10107.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM10107 is listed in this group.

In the Standard Replacement grade, ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ANCHOR 10107.

Part numbers include ANCHOR 10107, SKP SKM10107 and DEA / MARMON RIDE CONTROL A4660, among others listed above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 301026.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

39 Oil parts for the 2019 Mitsubishi Mirage come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 2208. Grades run from Full Synthetic through Racing; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts for the 2019 Mitsubishi Mirage come from 2 brands — DORMAN and SKP.

Part numbers include DORMAN 090075, DORMAN 090053 and SKP SK090053CD.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 2019 Mitsubishi Mirage, from AJUSA, APEX, DORMAN and 1 other brand.

Part numbers include AJUSA 18001100, APEX ADP1906 and DORMAN 095141, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2019 Mitsubishi Mirage come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand.

Listed part numbers: CALORSTAT OC2333, GATES 31118 and MOTORAD MO154, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

16 Oil Filter parts for the 2019 Mitsubishi Mirage come from 13 brands — BOSCH, VARIOUS MFR, WIX and 10 other brands. The "Popular" part is MOBIL M1110A.

The Economy section: 6 options from BOSCH, FRAM, FVP and 3 other brands. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1110A is listed in this group.

Standard Replacement: 8 parts, from BOSCH, WIX, ACKOJA and 5 other brands. A representative part number is BOSCH 3323.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies both parts for the 2019 Mitsubishi Mirage.

Part numbers include HASTINGS MANUFACTURING 2N5274 and HASTINGS MANUFACTURING 2N5274S.

This table covers the Timing Cam sprockets. Read more

This group shows a single part: CLOYES S1200.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts are listed for the 2019 Mitsubishi Mirage, from CLOYES and S.A. GEAR.

This group includes CLOYES 94318 and S.A. GEAR C1247.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

3 Timing Chain & Component Kit parts for the 2019 Mitsubishi Mirage come from 2 brands — CLOYES and S.A. GEAR.

The Economy section: 1 option from S.A. GEAR. S.A. GEAR 76469S is listed in this group.

Standard Replacement: 2 parts, from CLOYES. A representative part number is CLOYES 94318SAX.

Listed part numbers: S.A. GEAR 76469S, CLOYES 94318SAX and CLOYES 94318SA.

This table covers the guides and dampers that keep the timing chain on its path. Read more

4 Timing Chain Guide / Damper parts are listed for the 2019 Mitsubishi Mirage, from CLOYES and S.A. GEAR.

This group includes CLOYES 95826, CLOYES 95827 and S.A. GEAR 71319 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts for the 2019 Mitsubishi Mirage come from 2 brands — CLOYES and S.A. GEAR.

Listed part numbers: CLOYES 96217 and S.A. GEAR 91437.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts are listed for the 2019 Mitsubishi Mirage, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Part numbers include ANCHOR 10104, DEA / MARMON RIDE CONTROL A4659 and PIONEER 630104, among others listed above.

This table covers the Valve covers. Read more

One part is listed for the 2019 Mitsubishi Mirage — APEX VCS1365.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts for the 2019 Mitsubishi Mirage come from 4 brands — AJUSA, APEX, BECK/ARNLEY and 1 other brand.

This group includes AJUSA 11131000, APEX AVC1365 and BECK/ARNLEY 0362087 and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 2019 Mitsubishi Mirage come from 2 brands — AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 12022700, AJUSA 57067300 and MAHLE / CLEVITE SS46159.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: WELLS 2T1268.