This page lists 77 engine parts for the 1972 Monteverdi 375, across 20 part types, covering both the 7.0L V8 and the 7.2L V8. Every part shows its brand, manufacturer part number and fitment notes.
On the 1972 Monteverdi 375, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 25 parts of the 77 listed are Valve Cover Gasket (9 parts), Intake Manifold Gasket (8 parts) and Valve Stem Seal (8 parts). The other 17 part types cover the remaining 52 parts.
The 1972 Monteverdi 375 was sold with both the 7.0L V8 and the 7.2L V8. 38 parts fit every engine; the other 39 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1972 Monteverdi 375 engine parts are FEL-PRO (20 parts), MAHLE / CLEVITE (19 parts) and VICTOR REINZ (18 parts), plus 7 more brands. Quality grades include High Performance and Standard Replacement.
10 parts on this 1972 Monteverdi 375 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including KING ENGINE BEARINGS CR806HPND (Connecting Rod Bearing) and FEL-PRO BS40240 (Crankshaft Seal). Click any part number to see every vehicle that part fits.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular Fits: all 1972 375 engines | CR806HPND | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS Fits: all 1972 375 engines | CR806HPNDX | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS Fits: all 1972 375 engines | CR806XPND | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS Fits: all 1972 375 engines | CR806XPNDX | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS Fits: all 1972 375 engines | CR806XPNDCX | 🇺🇸 US | pmaxkote (racing line), polymer coatedSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular Fits: all 1972 375 engines | CR806AM | 🇺🇸 US | SetBimetal (Aluminum Base) | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
6 Connecting Rod Bearing parts for the 1972 Monteverdi 375 come from KING ENGINE BEARINGS. The "Popular" part is KING ENGINE BEARINGS CR806HPND. Every part fits both the 7.0L V8 and the 7.2L V8.
The High Performance section lists 5 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR806HPND is listed in this group.
In the Standard Replacement grade, KING ENGINE BEARINGS supplies 1 part: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR806AM.
Part numbers include KING ENGINE BEARINGS CR806HPND, KING ENGINE BEARINGS CR806HPNDX and KING ENGINE BEARINGS CR806XPND, among others listed above.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: all 1972 375 engines | MB5116HP | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS Fits: all 1972 375 engines | MB5116HPX | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
KING ENGINE BEARINGS supplies both parts for the 1972 Monteverdi 375. All of them fit every engine offered in the 1972 375.
Part numbers include KING ENGINE BEARINGS MB5116HP and KING ENGINE BEARINGS MB5116HPX.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: all 1972 375 engines | 99218 | 🇺🇸 US | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: all 1972 375 engines | WS99218 | 🇺🇸 US | Front | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
2 Crankshaft Repair Sleeve parts are listed for the 1972 Monteverdi 375, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 1972 375.
This group includes NATIONAL 99218 and WJB / INMOTION PARTS WS99218.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: all 1972 375 engines | BS40240 | 🇺🇸 US | Rubber | View on Amazon |
| NATIONAL Popular Fits: all 1972 375 engines | 3103 | 🇺🇸 US | Front | View on Amazon |
| BCA Fits: all 1972 375 engines | NS3103 | 🇺🇸 US | Front | View on Amazon |
| MAHLE / CLEVITE Fits: all 1972 375 engines | JV604 | 🇺🇸 US | SetMolded Rubber | View on Amazon |
| SCHAEFFLER Fits: all 1972 375 engines | SS3145 | 🇺🇸 US | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: all 1972 375 engines | WS3103 | 🇺🇸 US | Front | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Crankshaft Seal parts are listed for the 1972 Monteverdi 375, from FEL-PRO, NATIONAL, BCA and 3 other brands. FEL-PRO BS40240 carries the "Popular" badge. All of them fit every engine offered in the 1972 375.
Part numbers include FEL-PRO BS40240, NATIONAL 3103 and BCA NS3103, among others listed above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP Fits: all 1972 375 engines | 1453606 | 🇺🇸 US 🇨🇦 CA | SetHex Bolt Head | View on Amazon |
| ARP Fits: all 1972 375 engines | 4453706 | 🇺🇸 US 🇨🇦 CA | Set12 Point Bolt Head | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
2 Cylinder Head Bolt parts for the 1972 Monteverdi 375 come from ARP. Every part fits both the 7.0L V8 and the 7.2L V8.
Part numbers include ARP 1453606 and ARP 4453706.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 7.0L V8 | 8088WS | 🇺🇸 US | Hemi Engine(s) | View on Amazon |
| FEL-PRO Fits: 7.2L V8 | 8519PT1 | 🇺🇸 US | Permatorque | View on Amazon |
| MAHLE / CLEVITE Fits: all 1972 375 engines | 3464VC | 🇺🇸 US | Graphite | View on Amazon |
| VICTOR REINZ Fits: 7.0L V8 | 611114800 | 🇺🇸 US | HEMI engineHemi | View on Amazon |
| VICTOR REINZ Fits: 7.2L V8 | 611033200 | 🇺🇸 US | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Cylinder Head Gasket parts for the 1972 Monteverdi 375 come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. 1 part fits every engine; the other 4 are engine-specific.
Part numbers include FEL-PRO 8088WS, FEL-PRO 8519PT1 and MAHLE / CLEVITE 3464VC, among others listed above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 7.2L V8 | HS7891PT11 | 🇺🇸 US | Exhaust Manifold Gasket(s) Not IncludedIncludes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: all 1972 375 engines | HS3464VC | 🇺🇸 US | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ Fits: 7.2L V8 | 021032301 | 🇺🇸 US | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts for the 1972 Monteverdi 375 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. 1 part fits every engine; the other 2 are engine-specific.
Part numbers include FEL-PRO HS7891PT11, MAHLE / CLEVITE HS3464VC and VICTOR REINZ 021032301.
Cylinder Head Spacer Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 7.2L V8 | 55153 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ Fits: 7.2L V8 | 711638300 | 🇺🇸 US | View on Amazon |
This table covers the Cylinder Head Spacer shims.
2 Cylinder Head Spacer Shim parts for the 1972 Monteverdi 375 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.
This group includes MAHLE / CLEVITE 55153 and VICTOR REINZ 711638300.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINE PRO Fits: all 1972 375 engines | 311010MLS | 🇺🇸 US | 383, 400, 426 Wedge, 440 Engines | View on Amazon |
| FEL-PRO Fits: 7.0L V8 | FS8088WS1 | 🇺🇸 US | Overhaul SetValve stem seals Not included | View on Amazon |
| FEL-PRO Fits: 7.2L V8 | FS7891PT11 | 🇺🇸 US | Overhaul SetDoes Not Include Intake Manifold Gaskets | View on Amazon |
| MAHLE / CLEVITE Fits: 7.2L V8 | 953344 | 🇺🇸 US | Full Gasket Set | View on Amazon |
| VICTOR REINZ Fits: 7.2L V8 | 011002401 | 🇺🇸 US | Gasket Set | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Engine Kit Gasket Set parts for the 1972 Monteverdi 375 come from 4 brands — FEL-PRO, ENGINE PRO, MAHLE / CLEVITE and 1 other brand. 1 part fits every engine; the other 4 are engine-specific.
Listed part numbers: ENGINE PRO 311010MLS, FEL-PRO FS8088WS1 and FEL-PRO FS7891PT11, plus the other parts above.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP Fits: all 1972 375 engines | 2402501 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Harmonic Balancer bolts.
One part is listed for the 1972 Monteverdi 375 — ARP 2402501.
Intake Manifold Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP Fits: all 1972 375 engines | 1442001 | 🇺🇸 US 🇨🇦 CA | Hex Bolt Head | View on Amazon |
This table covers the Intake Manifold bolts.
This group shows a single part: ARP 1442001.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 7.2L V8 | MS90175 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO Fits: 7.0L V8 | MS90007 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO Fits: 7.2L V8 | MS96000 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 7.0L V8 | MS15179 | 🇺🇸 US | Paper | View on Amazon |
| MAHLE / CLEVITE Fits: 7.2L V8 | MS15914 | 🇺🇸 US | SteelSet | View on Amazon |
| VICTOR REINZ Fits: 7.0L V8 | 111037101 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: 7.2L V8 | 111000501 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: 7.2L V8 | 101004001 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
8 Intake Manifold Gasket parts for the 1972 Monteverdi 375 come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO MS90175.
Part numbers include FEL-PRO MS90175, FEL-PRO MS90007 and FEL-PRO MS96000, among others listed above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: all 1972 375 engines | 70822 | 🇺🇸 US | 0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer | View on Amazon |
| MAHLE / CLEVITE Fits: all 1972 375 engines | 2051 | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ Fits: all 1972 375 engines | 711346200 | 🇺🇸 US | 0.500 IN Inside Diameter | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Drain Plug Gasket parts for the 1972 Monteverdi 375 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. Every part fits both the 7.0L V8 and the 7.2L V8.
Part numbers include FEL-PRO 70822, MAHLE / CLEVITE 2051 and VICTOR REINZ 711346200.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: all 1972 375 engines | OS11729C1 | 🇺🇸 US | 1 Piece Design | View on Amazon |
| ENGINE PRO Fits: all 1972 375 engines | 317345WT | 🇺🇸 US | Stroker Crankshafts up To 4.150 Inch Stroke | View on Amazon |
| MAHLE / CLEVITE Fits: all 1972 375 engines | OS31416 | 🇺🇸 US | Cork-RubberOil Pan Gasket Material: Cork-Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 7.2L V8 | OS31416TC | 🇺🇸 US | Cork with Metal Carrier | View on Amazon |
| VICTOR REINZ Fits: all 1972 375 engines | 101018801 | 🇺🇸 US | Cork Rubber | View on Amazon |
| VICTOR REINZ Fits: 7.0L V8 | 101001801 | 🇺🇸 US | Molded Rubber on Rigid Carrier | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Oil Pan Gasket parts are listed for the 1972 Monteverdi 375, from MAHLE / CLEVITE, VICTOR REINZ, FEL-PRO and 1 other brand. FEL-PRO OS11729C1 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.
This group includes FEL-PRO OS11729C1, ENGINE PRO 317345WT and MAHLE / CLEVITE OS31416 and the remaining parts above.
Oil Pressure Relief Valve Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: all 1972 375 engines | 3122 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ Fits: all 1972 375 engines | 711456300 | 🇺🇸 US | View on Amazon |
This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pressure Relief Valve Gasket parts for the 1972 Monteverdi 375 come from 2 brands — FEL-PRO and VICTOR REINZ. Every part fits both the 7.0L V8 and the 7.2L V8.
Part numbers include FEL-PRO 3122 and VICTOR REINZ 711456300.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 7.2L V8 | B45558 | 🇺🇸 US | Molded Rubber | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: MAHLE / CLEVITE B45558.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: all 1972 375 engines | TCS124602 | 🇺🇸 US | Water Pump Gasket Included | View on Amazon |
| MAHLE / CLEVITE Fits: all 1972 375 engines | T18750 | 🇺🇸 US | Paper | View on Amazon |
| MAHLE / CLEVITE Fits: all 1972 375 engines | JV834 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: all 1972 375 engines | 151025001 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Timing Cover Gasket parts are listed for the 1972 Monteverdi 375, from MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ. All of them fit every engine offered in the 1972 375.
Part numbers include FEL-PRO TCS124602, MAHLE / CLEVITE T18750 and MAHLE / CLEVITE JV834, among others listed above.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: all 1972 375 engines | 64573 | 🇺🇸 US | Rubber | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 1972 Monteverdi 375 — MAHLE / CLEVITE 64573.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 7.2L V8 | VS13379 | 🇺🇸 US | Cork | View on Amazon |
| FEL-PRO Popular Fits: 7.2L V8 | VS50145R | 🇺🇸 US | High Temperature DesignRubber Coated Fiber | View on Amazon |
| FEL-PRO Fits: 7.0L V8 | VS50007C | 🇺🇸 US | Hemi Engine(s) | View on Amazon |
| MAHLE / CLEVITE Fits: 7.2L V8 | VS38322 | 🇺🇸 US | Cork-RubberSet | View on Amazon |
| MAHLE / CLEVITE Fits: 7.2L V8 | VS38322H | 🇺🇸 US | SetHigh Temperature Cork-Rubber | View on Amazon |
| VICTOR REINZ Fits: 7.0L V8 | 151044501 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: 7.2L V8 | 151052101 | 🇺🇸 US | Improved DesignSet | View on Amazon |
| VICTOR REINZ Fits: 7.2L V8 | 151059201 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: 7.2L V8 | 151052201 | 🇺🇸 US | SetHigh Temperature Design | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
9 Valve Cover Gasket parts are listed for the 1972 Monteverdi 375, from VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE. FEL-PRO VS13379 carries the "Popular" badge.
This group includes FEL-PRO VS13379, FEL-PRO VS50145R and FEL-PRO VS50007C and the remaining parts above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 7.2L V8 | SS12764 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO Popular Fits: 7.2L V8 | SS70014 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO Fits: 7.2L V8 | SS12419 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO Fits: 7.2L V8 | SS70537 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE Fits: all 1972 375 engines | SS45343 | 🇺🇸 US | SetMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 7.2L V8 | SS45623 | 🇺🇸 US | FluoroelastomerValve Stem Seal Outside Diameter | View on Amazon |
| MAHLE / CLEVITE Fits: 7.2L V8 | SS45403 | 🇺🇸 US | NitrileValve Stem Seal Outside Diameter | View on Amazon |
| VICTOR REINZ Fits: 7.2L V8 | 121002101 | 🇺🇸 US | SetContains 8 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
8 Valve Stem Seal parts are listed for the 1972 Monteverdi 375, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO SS12764 carries the "Popular" badge. 1 part fits every engine; the other 7 are engine-specific.
This group includes FEL-PRO SS12764, FEL-PRO SS70014 and FEL-PRO SS12419 and the remaining parts above.
Buying Engine Parts for a 1972 Monteverdi 375
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Valve Cover Gasket and Intake Manifold Gasket .
Frequently Asked Questions
How many engine parts fit the 1972 Monteverdi 375?
Our catalog currently lists 77 engine parts for the 1972 Monteverdi 375 across 20 subcategories and 10 brands, covering both the 7.0L V8 and the 7.2L V8. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1972 Monteverdi 375 engines?
Some do. 38 parts fit every engine; the other 39 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1972 Monteverdi 375?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1972 Monteverdi 375 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1972 Monteverdi 375?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1972 Monteverdi 375
Engine Parts for Other Monteverdi 375 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.