The 1968 Morgan 4/4 has 4 electrical parts with verified fitment on this page — 1 part type and 3 brands, covering both the 1.5L L4 and the 1.6L 4cyl. Each part includes a manufacturer part number and application notes.
The electrical system on the 1968 Morgan 4/4 covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors. Every listed part is Alternator / Generator End Bearing.
The 1968 Morgan 4/4 was sold with both the 1.5L L4 and the 1.6L 4cyl. 2 parts fit every engine; the other 2 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1968 Morgan 4/4 electrical parts are NATIONAL (2 parts), WJB / INMOTION PARTS (1 part) and BCA (1 part). Quality grades include Standard Replacement and Economy.
Each part number listed for the 1968 Morgan 4/4 opens a page with every vehicle that part fits.
Alternator / Generator End Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: all 1968 4/4 engines | RB6202 | 🇺🇸 US 🇨🇦 CA | Open Designwith Lucas Alternator | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: all 1968 4/4 engines | NB202 | 🇺🇸 US 🇨🇦 CA | with Lucas AlternatorDrive End | View on Amazon |
| NATIONAL Fits: 1.6L 4cyl | 202 | 🇨🇦 CA | Open Designwith Lucas Alternator | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 1.5L L4 | 202 | 🇺🇸 US 🇨🇦 CA | Fits Frontwith Lucas Alternator | View on Amazon |
This table covers the bearings in the alternator housing. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
4 Alternator / Generator End Bearing parts for the 1968 Morgan 4/4 come from 3 brands — NATIONAL, WJB / INMOTION PARTS and BCA. 2 parts fit every engine; the other 2 are engine-specific.
The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB6202 is listed in this group.
In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB202.
1 further part sits outside the graded sections, with the same engine-level match.
Part numbers include WJB / INMOTION PARTS RB6202, BCA NB202 and NATIONAL 202, among others listed above.
Buying Electrical Parts for a 1968 Morgan 4/4
On this vehicle, the electrical system covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors.
- Match the engine first. Some electrical parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Alternator / Generator End Bearing .
Frequently Asked Questions
How many electrical parts fit the 1968 Morgan 4/4?
Our catalog currently lists 4 electrical parts for the 1968 Morgan 4/4 across 1 subcategory and 3 brands, covering both the 1.5L L4 and the 1.6L 4cyl. Each part is matched to the engine(s) it fits.
Do electrical parts differ between 1968 Morgan 4/4 engines?
Some do. 2 parts fit every engine; the other 2 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of electrical problems on a 1968 Morgan 4/4?
Common symptoms include slow cranking on cold mornings, a battery light that flickers, dim lights at idle, or a check-engine code pointing at a sensor circuit. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Morgan 4/4 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1968 Morgan 4/4?
First match the engine — each row shows which engine(s) the part fits. Then test before replacing — a failed alternator and a bad ground can look identical, and sensors are frequently condemned for wiring faults. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1968 Morgan 4/4
Electrical Parts for Other Morgan 4/4 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.