34 Engine parts are listed for the 1969 Morgan Plus 8, in 14 part types, covering the 3.5L V8 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1969 Morgan Plus 8, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Connecting Rod Bearing (3 parts), Cylinder Head Gasket (3 parts) and Cylinder Head Gasket Set (3 parts). The other 11 part types cover the remaining 25 parts.
Every part on this page is matched to the 3.5L V8 — the only engine offered in the 1969 Morgan Plus 8.
The most listed brands for 1969 Morgan Plus 8 engine parts are FEL-PRO (10 parts), VICTOR REINZ (10 parts) and MAHLE / CLEVITE (6 parts), plus 4 more brands. Quality grades include Economy and Standard Replacement.
Each part number listed for the 1969 Morgan Plus 8 opens a page with every vehicle that part fits.
Camshaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER | 1421M | 🇺🇸 US | View on Amazon |
This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: SEALED POWER 1421M.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | CR811SI | 🇺🇸 US | BI-Metal (aluminum silicon base)Set | View on Amazon |
| SEALED POWER | 2500RAA | 🇺🇸 US | A-Series aluminum bearings | View on Amazon |
| SEALED POWER | 82500RAA | 🇺🇸 US | SetA-Series aluminum bearings | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Connecting Rod Bearing parts for the 1969 Morgan Plus 8 come from 2 brands — SEALED POWER and KING ENGINE BEARINGS.
This group includes KING ENGINE BEARINGS CR811SI, SEALED POWER 2500RAA and SEALED POWER 82500RAA.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | MB589AM | 🇺🇸 US | BI-Metal (aluminum base)Set | View on Amazon |
| SEALED POWER | 4096MA | 🇺🇸 US | SetA-Series aluminum bearings | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
2 Crankshaft Main Bearing parts are listed for the 1969 Morgan Plus 8, from KING ENGINE BEARINGS and SEALED POWER.
This group includes KING ENGINE BEARINGS MB589AM and SEALED POWER 4096MA.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 7984PT | 🇺🇸 US | View on Amazon | |
| MAHLE / CLEVITE | 1174BS | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ | 611115000 | 🇺🇸 US | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Cylinder Head Gasket parts for the 1969 Morgan Plus 8 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO 7984PT, MAHLE / CLEVITE 1174BS and VICTOR REINZ 611115000.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | HS7984PT | 🇺🇸 US | Includes Valve Stem SealsIntake Manifold Gasket(s) Not Included | View on Amazon |
| MAHLE / CLEVITE | HS1174BS | 🇺🇸 US | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ | 021109301 | 🇺🇸 US | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts for the 1969 Morgan Plus 8 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO HS7984PT, MAHLE / CLEVITE HS1174BS and VICTOR REINZ 021109301.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | FS7984PT | 🇺🇸 US | Intake Manifold Gasket(s) Not IncludedOverhaul Set | View on Amazon |
| MAHLE / CLEVITE | FS1174BS | 🇺🇸 US | Full Set | View on Amazon |
| VICTOR REINZ | 011029901 | 🇺🇸 US | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Engine Kit Gasket Set parts for the 1969 Morgan Plus 8 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO FS7984PT, MAHLE / CLEVITE FS1174BS and VICTOR REINZ 011029901.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | MS96002 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE | MS15806 | 🇺🇸 US | Beaded Steel | View on Amazon |
| VICTOR REINZ | 101005601 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Intake Manifold Gasket parts for the 1969 Morgan Plus 8 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
This group includes FEL-PRO MS96002, MAHLE / CLEVITE MS15806 and VICTOR REINZ 101005601.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 70822 | 🇺🇸 US | 0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer | View on Amazon |
| VICTOR REINZ | 711346200 | 🇺🇸 US | 0.500 IN Inside Diameter | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Drain Plug Gasket parts for the 1969 Morgan Plus 8 come from 2 brands — FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO 70822 and VICTOR REINZ 711346200.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR | PG33 | 🇺🇸 US | Spin-On | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX | 51049 | 🇺🇸 US | Anti-Drain Back Valve: NoHeight: 5.178 In | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
2 Oil Filter parts are listed for the 1969 Morgan Plus 8, from VARIOUS MFR and WIX.
In the Economy grade, VARIOUS MFR supplies 1 part: the catalog's value-priced group. A representative part number is VARIOUS MFR PG33.
The Standard Replacement section lists 1 option from WIX — built to original-equipment specification. WIX 51049 is listed in this group.
Part numbers include VARIOUS MFR PG33 and WIX 51049.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | OS12992C | 🇺🇸 US | View on Amazon | |
| MAHLE / CLEVITE | OS30665 | 🇺🇸 US | Cork-Rubber | View on Amazon |
| VICTOR REINZ | 101011401 | 🇺🇸 US | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Pan Gasket parts are listed for the 1969 Morgan Plus 8, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO OS12992C, MAHLE / CLEVITE OS30665 and VICTOR REINZ 101011401.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 70032 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ | 711387800 | 🇺🇸 US | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pump Gasket parts for the 1969 Morgan Plus 8 come from 2 brands — FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO 70032 and VICTOR REINZ 711387800.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | TCS13001 | 🇺🇸 US | Rope Type | View on Amazon |
| VICTOR REINZ | 151035601 | 🇺🇸 US | Contains Rope PackingSet | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Timing Cover Gasket parts are listed for the 1969 Morgan Plus 8, from FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO TCS13001 and VICTOR REINZ 151035601.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 15200 | 🇺🇸 US | Rubber 1 - Piece Timing Cover Seal | View on Amazon |
| VICTOR REINZ | 711453400 | 🇺🇸 US | Rubber 1 - Piece Timing Cover Seal | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Timing Cover Seal parts are listed for the 1969 Morgan Plus 8, from FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO 15200 and VICTOR REINZ 711453400.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | VS12993C | 🇺🇸 US | Cork | View on Amazon |
| MAHLE / CLEVITE | VS38118 | 🇺🇸 US | Cork-Rubber | View on Amazon |
| VICTOR REINZ | 151043401 | 🇺🇸 US | Improved DesignSet | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Valve Cover Gasket parts are listed for the 1969 Morgan Plus 8, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO VS12993C, MAHLE / CLEVITE VS38118 and VICTOR REINZ 151043401.
Buying Engine Parts for a 1969 Morgan Plus 8
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 3.5L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Connecting Rod Bearing and Cylinder Head Gasket .
Frequently Asked Questions
How many engine parts fit the 1969 Morgan Plus 8?
Our catalog currently lists 34 engine parts for the 1969 Morgan Plus 8 across 14 subcategories and 7 brands, covering the 3.5L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1969 Morgan Plus 8?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1969 Morgan Plus 8 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1969 Morgan Plus 8?
Every part on this page is matched to the 3.5L V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1969 Morgan Plus 8
Engine Parts for Other Morgan Plus 8 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.