2006 Morgan Roadster Engine Parts

Engine:
3.0L V6

The 2006 Morgan Roadster has 20 engine parts with verified fitment on this page — 7 part types and 7 brands, covering the 3.0L V6 engine. Each part includes a manufacturer part number and application notes.

The engine on the 2006 Morgan Roadster covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Crankshaft Seal (5 parts), Camshaft Seal (4 parts) and Crankshaft Repair Sleeve (3 parts). The other 4 part types cover the remaining 8 parts.

Camshaft Seal

Brand Part Number Markets Notes Buy
BCA NS471651
🇺🇸 US
View on
Amazon
NATIONAL 471651
🇺🇸 US
View on
Amazon
SCHAEFFLER SS3663
🇺🇸 US
1.62" I:D X 1.63" O.D. X 0.25" Width
View on
Amazon
WJB / INMOTION PARTS WS471651
🇺🇸 US
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA NS88187
🇺🇸 US
Front
View on
Amazon
NATIONAL 99187
🇺🇸 US
FrontStandard Size Sleeve
View on
Amazon
WJB / INMOTION PARTS WS99187
🇺🇸 US
FrontStandard Size Sleeve
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
NATIONAL Popular 3909
🇺🇸 US
RearViton Type
View on
Amazon
BCA NS5277
🇺🇸 US
PTFE Rubber
Fitment notes — BCA NS5277
PTFE Rubber
Rear
View on
Amazon
NATIONAL 482041N
🇺🇸 US
Front
View on
Amazon
WJB / INMOTION PARTS WS482041N
🇺🇸 US
Front
View on
Amazon
WJB / INMOTION PARTS WS3909
🇺🇸 US
RearViton Type
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Harmonic Balancer Repair Sleeve

Brand Part Number Markets Notes Buy
BCA NS88187
🇺🇸 US
View on
Amazon
NATIONAL 88187
🇺🇸 US
View on
Amazon
WJB / INMOTION PARTS WS88187
🇺🇸 US
View on
Amazon

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface.

Oil

Brand Part Number Markets Notes Buy
VALVOLINE VV180
🇺🇸 US
Full Synthetic High Mileage with Max Life Technology SAE 10W-301 Quart
View on
Amazon
VALVOLINE 881170
🇺🇸 US
Full Synthetic High Mileage with Max Life Technology SAE 10W-30Easy Pour 5 Quart
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
VARIOUS MFR PG195
🇺🇸 US
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
VARIOUS MFR PG195EX
🇺🇸 US
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Piston Ring

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE 42095CP
🇺🇸 US
PremiumMaterial Carbon Steel / Cast Iron / Stainless Steel
Fitment notes — MAHLE / CLEVITE 42095CP
PremiumMaterial Carbon Steel / Cast Iron / Stainless SteelSetAxial Height: 1.2mm / 1.5mm / 2.5mmFacing: Plasma-Moly / ChromeRing Type: RF-13PF / THG-10 / CP-20
Shallow Groove
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Buying Engine Parts for a 2006 Morgan Roadster

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 3.0L V6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Seal and Camshaft Seal .

Frequently Asked Questions

How many engine parts fit the 2006 Morgan Roadster?

Our catalog currently lists 20 engine parts for the 2006 Morgan Roadster across 7 subcategories and 7 brands, covering the 3.0L V6 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 2006 Morgan Roadster?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2006 Morgan Roadster?

Oil rows on this page include SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2006 Morgan Roadster was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2006 Morgan Roadster?

Every part on this page is matched to the 3.0L V6 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2006 Morgan Roadster

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.