The 1963 Morris Oxford has 15 ignition parts with verified fitment on this page — 6 part types and 8 brands, covering the 1.6L L4 engine. Each part includes a manufacturer part number and application notes.
On the 1963 Morris Oxford, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 12 parts of the 15 listed are Ignition Coil (8 parts), Condenser / Capacitor (2 parts) and Spark Plug (2 parts). The other 3 part types cover the remaining 3 parts.
The 1963 Morris Oxford came with a single engine, the 1.6L L4, and every part is verified against it.
8 brands supply ignition parts for the 1963 Morris Oxford, led by STANDARD MOTOR PRODUCTS (7 parts), CHAMPION (2 parts) and FVP (1 part), plus 5 more brands. Quality grades include Economy and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1963 Morris Oxford. 2 parts have it, including STANDARD MOTOR PRODUCTS UC15T (Ignition Coil) and STANDARD MOTOR PRODUCTS UC15 (Ignition Coil). Each part number opens a page with every vehicle that part fits.
Condenser / Capacitor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU206T | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU206 | 🇺🇸 US | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
2 Condenser / Capacitor parts for the 1963 Morris Oxford come from STANDARD MOTOR PRODUCTS.
The Economy section lists 1 option from STANDARD MOTOR PRODUCTS — the catalog's value-priced group. STANDARD MOTOR PRODUCTS LU206T is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS supplies 1 part: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS LU206.
This group includes STANDARD MOTOR PRODUCTS LU206T and STANDARD MOTOR PRODUCTS LU206.
Distributor Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU420 | 🇺🇸 US | View on Amazon |
This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
One part is listed for the 1963 Morris Oxford — STANDARD MOTOR PRODUCTS LU420.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU300 | 🇺🇸 US | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
One part is listed for the 1963 Morris Oxford — STANDARD MOTOR PRODUCTS LU300.
Ignition Breaker Points
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU1617P | 🇺🇸 US | View on Amazon |
This table covers the breaker points in a points-type distributor.
This group shows a single part: STANDARD MOTOR PRODUCTS LU1617P.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | UC15T | 🇺🇸 US | T-Series | View on Amazon |
| FVP | UC15F | 🇺🇸 US | Alternate Replacement Part | View on Amazon |
| HOLSTEIN | 2IGC0058 | 🇺🇸 US | View on Amazon | |
| SKP | SKUF3T | 🇺🇸 US | Fits Coil Packor with High Compression | View on Amazon |
| SPECTRA PREMIUM | C654 | 🇺🇸 US | High compression | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | UC15 | 🇺🇸 US | View on Amazon | |
| UNITED MOTOR PRODUCTS | C15 | 🇺🇸 US | View on Amazon | |
| WELLS | 5C1019 | 🇺🇸 US | Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
8 Ignition Coil parts for the 1963 Morris Oxford come from 7 brands — STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 4 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS UC15T.
The Economy section: 5 options from STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 2 other brands. STANDARD MOTOR PRODUCTS UC15T is listed in this group.
Standard Replacement: 3 parts, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. A representative part number is STANDARD MOTOR PRODUCTS UC15.
Part numbers include STANDARD MOTOR PRODUCTS UC15T, FVP UC15F and HOLSTEIN 2IGC0058, among others listed above.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION | 120 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.026" | View on Amazon |
| CHAMPION | 123 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
CHAMPION supplies both parts for the 1963 Morris Oxford.
Listed part numbers: CHAMPION 120 and CHAMPION 123.
Buying Ignition Parts for a 1963 Morris Oxford
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 1.6L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Condenser / Capacitor .
Frequently Asked Questions
How many ignition parts fit the 1963 Morris Oxford?
Our catalog currently lists 15 ignition parts for the 1963 Morris Oxford across 6 subcategories and 8 brands, covering the 1.6L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1963 Morris Oxford?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1963 Morris Oxford?
Notes on this page include pre-set gaps of 0.025" and 0.026". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1963 Morris Oxford was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1963 Morris Oxford?
Every part on this page is matched to the 1.6L L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1963 Morris Oxford
Ignition Parts for Other Morris Oxford Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.